BC846AW - BC848CW NPN SMALL SIGNAL SURFACE MOUNT TRANSISTOR Features * * * * * Ideally Suited for Automatic Insertion Complementary PNP Types Available (BC856W-BC858W) For Switching and AF Amplifier Applications Lead Free/RoHS Compliant (Note 3) "Green" Device (Note 4 and 5) A SOT-323 C B C B G Mechanical Data * * * * * * * * * H Case: SOT-323 Case Material: Molded Plastic, "Green" Molding Compound, Note 5. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Solderable per MIL-STD-202, Method 208 Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe). Pin Connections: See Diagram Marking Codes (See Table Below & Diagram on Page 3) Ordering & Date Code Information: See Page 3 Weight: 0.006 grams (approximate) Type BC846AW BC846BW BC847AW BC847BW Marking Code (Note 2) Marking Type K1Q BC847CW K1R BC848AW K1E, K1Q BC848BW K1F, K1R BC848CW Maximum Ratings Emitter-Base Voltage M J D F L Max 0.25 0.40 B 1.15 1.35 C 2.00 2.20 D 0.65 Nominal F 0.30 0.40 G 1.20 1.40 H 1.80 2.20 J 0.0 0.10 K 0.90 1.00 L 0.25 0.40 M 0.10 0.18 0 8 All Dimensions in mm Marking K1M K1J, K1E, K1Q K1K, K1F, K1R K1L, K1M Symbol BC846 BC847 BC848 BC846 BC847 BC848 BC846, BC847 BC848 Collector Current Peak Collector Current Peak Emitter Current Power Dissipation (Note 1) Thermal Resistance, Junction to Ambient (Note 1) Operating and Storage Temperature Range Notes: K Min A @TA = 25C unless otherwise specified Characteristic Collector-Base Voltage Collector-Emitter Voltage E Dim IC ICM IEM Pd RJA Value 80 50 30 65 45 30 6.0 5.0 100 200 200 200 625 mA mA mA mW C/W Tj, TSTG -65 to +150 C VCBO VCEO VEBO Unit V V V 1. Device mounted on FR-4 PCB, 1 inch x 0.85 inch x 0.062 inch; pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 2. Current gain subgroup "C" is not available for BC846W. 3. No purposefully added lead. 4. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 5. Product manufactured with Date Code 0627 (week 27, 2006) and newer are built with Green Molding Compound. Product manufactured prior to Date Code 0627 are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants. DS30250 Rev. 9 - 2 1 of 3 www.diodes.com BC846AW - BC848CW (c) Diodes Incorporated Electrical Characteristics @TA = 25C unless otherwise specified Characteristic Collector-Base Breakdown Voltage (Note 6) BC846 BC847 BC848 Collector-Emitter Breakdown Voltage (Note 6) BC846 BC847 BC848 Emitter-Base Breakdown Voltage BC846, BC847 (Note 6) BC848 DC Current Gain Current Gain Group A B (Note 6) C Symbol V(BR)CBO V(BR)CEO V(BR)EBO hFE Min 80 50 30 65 45 30 6 5 110 200 420 Typ -- -- -- -- -- -- Max -- -- -- -- -- -- Unit -- -- 180 290 520 90 200 220 450 800 250 600 V IC = 10A, IB = 0 V IC = 10mA, IB = 0 V IE = 1A, IC = 0 -- VCE = 5.0V, IC = 2.0mA Collector-Emitter Saturation Voltage (Note 6) VCE(SAT) -- Base-Emitter Saturation Voltage (Note 6) VBE(SAT) -- 700 900 -- mV Base-Emitter Voltage (Note 6) VBE(ON) 580 -- 660 -- 700 770 mV ICBO ICBO -- -- -- -- 15 5.0 nA A fT 100 300 -- MHz CCBO -- 3.0 4.5 pF NF -- -- 10 dB Collector-Cutoff Current (Note 6) Gain Bandwidth Product Collector-Base Capacitance Noise Figure Notes: Test Condition mV IC = 10mA, IB = 0.5mA IC = 100mA, IB = 5.0mA IC = 10mA, IB = 0.5mA IC = 100mA, IB = 5.0mA VCE = 5.0V, IC = 2.0mA VCE = 5.0V, IC = 10mA VCB = 30V VCB = 30V, TA = 150C VCE = 5.0V, IC = 10mA, f = 100MHz VCB = 10V, f = 1.0MHz VCE = 5V, IC = 200A, RS = 2.0k, f = 1.0kHz, f = 200Hz 6. Short duration pulse test used to minimize self-heating effect. 300 0.4 VCE(SAT), COLLECTOR TO EMITTER SATURATION VOLTAGE (V) PD, POWER DISSIPATION (mW) IC IB = 20 250 200 150 100 50 0 0 25 DS30250 Rev. 9 - 2 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE (C) Fig. 1, Max Power Dissipation vs. Ambient Temperature 0.3 0.2 TA = 150C 0.1 TA = -50C 0 0.1 200 2 of 3 www.diodes.com T A = 25C 1 10 1,000 100 IC, COLLECTOR CURRENT (mA) Fig. 2 Collector Emitter Saturation Voltage vs. Collector Current BC846AW - BC848CW (c) Diodes Incorporated 1,000 1,000 T A = 150C fT, GAIN BANDWIDTH PRODUCT (MHz) VCE = 5V hFE, DC CURRENT GAIN TA = 25C 100 100 T A = -50C 10 1 1 10 1 1 10 1,000 100 IC, COLLECTOR CURRENT (mA) Fig. 3, DC Current Gain vs. Collector Current Ordering Information 10 100 IC, COLLECTOR CURRENT (mA) Fig. 4, Gain Bandwidth Product vs. Collector Current (Note 5 & 7) Packaging SOT-323 Device BC84xxW-7-F* Shipping 3000/Tape & Reel *xx = device type, e.g. BC846AW-7. Notes: 7. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information Date Code Key Year YM XXX XXX = Product Type Marking Code (See Page 1), e.g. K1Q = BC846AW YM = Date Code Marking Y = Year ex: N = 2002 M = Month ex: 9 = September 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 Code J K L M N P R S T U V W X Y Z Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Code 1 2 3 4 5 6 7 8 9 O N D IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30250 Rev. 9 - 2 3 of 3 www.diodes.com BC846AW - BC848CW (c) Diodes Incorporated