CII Low Signal Relays Single Pole, Electrically Held, 1 Amp and Less 1MA, 1MAD, 1MADD 1MA Standard TO-5 High Performance Relay Qualified to MIL-R-39016/7 A2 X1 1MAD Standard TO-5 Diode Suppressed High Performance Relay 1MADD Standard TO-5 Diode Suppressed/Protected High Performance Relay Qualified to MIL-R-39016/23 Qualified to MIL-R-39016/24 A2 X1 X2 A2 + X1 X2 - A1 A3 Contact Arrangement -- 1 Form C (SPDT) Contact Material -- Stationary -- Gold/platinum/palladium/silver alloy (gold plated) Moveable -- Gold/platinum/palladium/silver alloy (gold plated) Contact Resistance -- Before Life -- 100 milliohms max. (measured @ 10 mA @ 6 Vdc) After Life -- 200 milliohms max. (measured @ 1 A @ 28 Vdc) Mechanical Life Expectancy -- 1 million operations Coil Voltage -- 5 to 26.5 Vdc Coil Power -- 512 mW max. @ 25C Duty Cycle -- Continuous Pick-up Voltage -- Approximately 50% of nominal coil voltage Pick-up Sensitivity -- 100 mW max. @ 25C A1 Terminal View Product Facts Electrical Characteristics - A3 A1 Terminal View Product Facts Product Facts Hermetically sealed n Suppression diode n High shock & vibration ratings n Hermetically sealed n High shock & vibration ratings n Spreader pad n Excellent RF switching Spreader pad n Excellent RF switching A3 Terminal View n n + X2 n Suppression & protection diodes n Hermetically sealed n High shock & vibration ratings n Spreader pad n Excellent RF switching Contact Ratings Contact Load 1.0 A @ 28 Vdc 250 mA @ 115 Vac, 60 Hz & 400 Hz 100 mA @ 115 Vac, 60 Hz & 400 Hz 0.2 A @ 28 Vdc 0.1 A @ 28 Vdc 30 A @ 50 mVdc 0.1 A @ 28 Vdc Operations MINd. 100,000 100,000 100,000 100,000 100,000 1,000,000 50,000 Type Resistive Resistive (case not grounded) Resistive Inductive (0.32 Henry) Lamp Low Level Intermediate Current .335 (8.51) DIA MAX .370 (9.40) DIA MAX .280 (7.11) MAX .031 .003 (0.79) .035.010 (0.89) TERMINALS W 1.500 MINd (38.1) C .500 MINd (12.7) P .187 .010 (4.75 .25) (Length excludes spreader pad) .200 (5.08) DIA 45 3 .017+.002 (0.43) DIA -.001 .370 (9.40) DIA MAX 1MA/1MAD/1MADD Header 1MA/1MAD/1MADD Enclosure 1-2 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com 3 CII Low Signal Relays Single Pole, Electrically Held, 1 Amp and Less (Continued) Operating Characteristics Environmental Characteristics Semiconductor Characteristics (Continued) Timing -- Operate Time -- 2.0 ms max. Release Time -- 1MA -- 2.0 ms max. 1MAD/1MADD -- 4.0 ms max. (suppression diode, suppression/ steering diodes) Contact Bounce -- 1.5 ms max Dielectric Withstanding Voltage -- Between Open Contacts -- 500 Vrms 60 Hz Between Adjacent Contacts -- 500 Vrms 60 Hz Between Contacts & Coil -- 500 Vrms 60 Hz Insulation Resistance -- 10,000 megohms @ 500 Vdc 1,000 megohms @ 500 Vdc (coil to case @ +125C) Temperature Range -- -65C to +125C Weight -- 0.08 oz. (2.27 grms) 0.09 oz. (2.52 grms) with spreader pad attached Vibration Resistance -- 30 G's, 10 to 3,000 Hz Shock Resistance -- 75 G's, 6 1 ms max. QPL Approval -- MIL-R-39016/7 (J1MA) MIL-R-39016/23 (J1MAD) MIL-R-39016/24 (J1MADD) Diode -- 100 Vdc peak inverse voltage (PIV) 1.0 Vdc max. transient voltage 1 CII Low Signal Relays 1MA, 1MAD, 1MADD .103 (2.62) .014.003 (0.36) 0.47 (1.19) DIA .370 (9.40) SQ MAX .100 (2.54) .100 (2.54) S W .140 - .175 DIA (3.56 - 4.45) Spreader & Mounting Pads Coil Data Nom. Coil Voltage (Vdc) 1MA/1MAD 5.0 6.0 9.0 12.0 18.0 26.5 1MADD 5.0 6.0 9.0 12.0 18.0 26.5 Coil Resistance in Ohms 10% @ 25C (Note 1) Coil Circuit Current mA (Max.) (Note 1&2) Coil Circuit Current mA (Min.) (Note 1&2) Pickup Voltage Vdc (Max.) @ 25C (Note 2) Base Turn On Current mA (Max.) @ 25C Pickup Voltage Vdc (Max.) @ 125C (Note 2) Base Turn On Current mA (Max.) @ 125C Drop-Out Voltage Vdc (Min.) @ 25C (Note 2) Drop-Out Voltage Vdc (Min.) @ -65C (Note 2) Nom. Coil Power (mW) @ 25C Max. Coil Voltage Coil Desig. 63 125 280 500 1,130 2,000 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a 2.8 3.5 5.3 7.0 10.5 14.2 n/a n/a n/a n/a n/a n/a 3.7 4.5 6.8 9.0 13.5 18.0 n/a n/a n/a n/a n/a n/a 0.23 0.28 0.54 0.63 0.91 1.37 0.15 0.18 0.35 0.40 0.58 0.89 397 288 289 288 287 351 6.0 8.0 12.0 16.0 24.0 32.0 5 6 9 12 18 26 50 98 280 500 1,130 2,000 100.0 62.4 33.7 25.6 17.2 14.4 72.7 46.3 25.9 20.0 13.6 11.5 3.5 4.1 6.3 8.0 11.6 15.4 n/a n/a n/a n/a n/a n/a 4.5 5.5 7.8 10.0 14.5 19.0 n/a n/a n/a n/a n/a n/a 0.23 0.28 0.54 0.63 0.91 1.37 0.15 0.18 0.35 0.40 0.58 0.89 500 367 289 288 287 351 6.0 8.0 12.0 16.0 24.0 32.0 5 6 9 12 18 26 Notes: 1. Coil resistance not directly measurable. Coil current should be within limits shown when tested at nominal voltage at 25C for 5 seconds max. 2. Set base current at 3 mA to 15 mA during measurements. Ordering Instructions Catalog-selected Relays: The catalog number is derived by choosing the proper CODE for each of the relay characteristics in the order in which the codes are listed. Specifying a Part Number Example*: Type Terminal Diodes Coils Spreader/Mounting Pads 1MA C D -26 S * The part number example shown on this page is for catalog items. For a list of specific QPL part numbers, please see the index in Section 15. 1-3 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com