PHOTOCOUPLER PS2861-1 -NEPOC Series- ED HIGH ISOLATION VOLTAGE 4-PIN SOP PHOTOCOUPLER DESCRIPTION The PS2861-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor. The PS2861-1 meets insulation thickness 0.4 mm and BSIs insulation supplementary approved. high density applications. FEATURES * Isolation distance (0.4 mm MIN.) * High isolation voltage (BV = 2 500 Vr.m.s.) * SOP (Small Outline Package) type IN U The package has shield effect to cut off ambient light, and is mounted in a plastic SOP (Small Outline Package) for * High-speed switching (tr = 4 s TYP., tf = 5 s TYP.) O NT * Ordering number of tape product: PS2861-1-F3, F4 * Safety standards: PS2861-1 * UL approved: File No. E72422 (S) * BSI approved: No. 8514, 8515 APPLICATIONS * Modem * Programmable logic controllers DI SC * Power supply Document No. PN10258EJ01V0DS (1st edition) (Previous No. P15093EJ2V0DS00) Date Published February 2003 CP(K) The mark shows major revised points. PS2861-1 PACKAGE DIMENSIONS (UNIT: mm) TOP VIEW 4 3 ED 2.70.3 1. Anode 2. Cathode 3. Emitter 4. Collector 2 IN U 1 7.00.3 0.15+0.10 -0.05 2.00.1 0.10.1 4.4 0.50.3 1.27 0.12 M O NT 0.40.1 PHOTOCOUPLER CONSTRUCTION Parameter Unit (MIN.) Air Distance 4.5 mm Creepage Distance 4.5 mm Isolation Distance 0.4 mm DI SC MARKING PS2861-1 N61 003 Assembly Lot Last number of type: 61 "N" of NEC 0 03 Week Assembled Year Assembled (Last 1 Digit) 2 Data Sheet PN10258EJ01V0DS PS2861-1 ORDERING INFORMATION (Solder Contains Lead) Part Number PS2861-1 Package 4-pin SOP Application Part Number Packing Style 50 pcs (Tape 50 pcs cut) PS2861-1-F3 *1 PS2861-1 Embossed Tape 3 500 pcs/reel ED PS2861-1-F4 *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) PS2861-1-A Package 4-pin SOP Application Part Number Packing Style 50 pcs (Tape 50 pcs cut) PS2861-1-F3-A *1 PS2861-1 IN U Part Number Embossed Tape 3 500 pcs/reel PS2861-1-F4-A *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Diode Symbol Ratings O NT Parameter Unit Forward Current (DC) IF 50 mA Reverse Voltage VR 6 V PD/C 0.6 mW/C PD 60 mW IFP 1.0 A Collector to Emitter Voltage VCEO 40 V Emitter to Collector Voltage VECO 5 V IC 40 mA PC/C 1.2 mW/C PC 120 mW BV 2 500 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +150 C Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 Collector Current DI SC Power Dissipation Derating Power Dissipation Isolation Voltage *2 *1 PW = 100 s, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output Data Sheet PN10258EJ01V0DS 3 PS2861-1 ELECTRICAL CHARACTERISTICS (TA = 25 C) Diode Transistor Symbol Conditions Forward Voltage VF IF = 5 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1 MHz Collector to Emitter Dark ICEO IF = 0 mA, VCE = 40 V CTR IF = 5 mA, VCE = 5 V VCE (sat) IF = 10 mA, IC = 2 mA Current Coupled Current Transfer Ratio (IC/IF) *1 Collector Saturation Voltage RI-O VI-O = 1 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz *2 tr Rise Time *2 Fall Time tf *1 CTR rank K: 200 to 400 (%) L: 100 to 300 (%) VCC = 5 V, IC = 2 mA, RL = 100 N: 50 to 400 (%) VCC PW = 100 s Duty cycle = 1/10 IF In monitor VOUT RL = 100 DI SC 50 4 Unit 1.1 1.4 V 5 A 50 200 11 Data Sheet PN10258EJ01V0DS pF 100 nA 400 % 0.3 V 0.4 pF 4 s 5 *2 Test circuit for switching time Pulse Input MAX. 15 10 O NT M: 50 to 150 (%) TYP. IN U Isolation Resistance MIN. ED Parameter PS2861-1 TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 80 60 40 50 25 0 100 75 180 150 120 90 60 30 IN U 20 210 100 75 35 100 Collector Current IC (mA) 30 TA = +100 C +60 C +25 C 1 0 C -25 C -50 C 0.1 0.01 0.0 0.5 1.0 1.5 2.0 IF = 25 mA 20 mA 15 mA 25 O NT Forward Current IF (mA) 50 COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE FORWARD CURRENT vs. FORWARD VOLTAGE 10 mA 20 15 5 mA 10 5 0 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE DI SC Collector to Emitter Dark Current ICEO (nA) 25 0 Ambient Temperature TA ( C) Ambient Temperature TA (C) 10 ED Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 100 10 000 Collector Current IC (mA) 100 1 000 VCE = 20 V 40 V 100 10 1 -25 0 25 50 75 100 10 mA 5 mA 2 mA 10 1 0.1 0.0 Ambient Temperature TA (C) IF = 1mA 0.2 0.4 0.6 0.8 1.0 Collector Saturation Voltage VCE(sat) (V) Data Sheet PN10258EJ01V0DS 5 PS2861-1 CURRENT TRANSFER RATIO vs. FORWARD CURRENT 1.4 400 1.2 350 VCE = 5 V, n=3 0.8 0.6 0.4 Normalized to 1.0 at TA = 25 C, IF = 5 mA, VCE = 5 V 0.0 -50 0 -25 25 50 200 Sample A B C 150 100 50 0 0.1 100 75 250 1 Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE SWITCHING TIME vs. LOAD RESISTANCE 100 1 000 IF = 1 mA, VCC = 5 V, CTR = 200 % tf tr td 1 10 ts 100 tr td 1 100 DI SC IF = 5 mA 1.0 -5 CTR (Relative Value) Normalized Gain Gv 100 k 1.2 0 100 RL = 1 k -10 300 -15 0.8 IF = 1 mA, TA = 25 C IF = 5 mA, TA = 25 C IF = 20 mA, TA = 25 C IF = 20 mA, TA = 60 C 0.6 0.4 0.2 -20 10 10 k LONG TERM CTR DEGRADATION FREQUENCY RESPONSE 1 1k Load Resistance RL () Load Resistance RL () -25 0.1 ts 10 0.1 10 10 k 1k tf 100 O NT 10 Switching Time t (s) IC = 2 mA, VCC = 5 V, CTR = 200 % 100 1 000 0.0 1 102 103 104 Time (Hr) Frequency f (kHz) Remark The graphs indicate nominal characteristics. 6 100 10 IN U 0.2 300 ED 1.0 Ambient Temperature TA (C) Switching Time t ( s) Current Transfer Ratio CTR (%) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE Data Sheet PN10258EJ01V0DS 105 106 PS2861-1 TAPING SPECIFICATIONS (UNIT: mm) 7.50.1 ED 1.5+0.1 -0 4.00.1 7.550.1 2.00.1 16.00.3 1.750.1 Outline and Dimensions (Tape) 2.8 MAX. 0.3 1.550.1 2.30.1 IN U 2.850.1 4.00.1 Tape Direction N61 003 N61 003 N61 003 N61 003 N61 003 N61 003 N61 003 N61 003 N61 003 N61 003 PS2861-1-F4 O NT PS2861-1-F3 R 1.0 21.00.8 1001.0 2.00.5 13.00.2 2.00.5 3302.0 DI SC Outline and Dimensions (Reel) 17.51.0 21.51.0 Packing: 3 500 pcs/reel Data Sheet PN10258EJ01V0DS 15.9 to 19.4 Outer edge of flange 7 PS2861-1 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering 235 C or below (package surface temperature) * Time of temperature higher than 210 C 30 seconds or less * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a ED * Peak reflow temperature maximum chlorine content of 0.2 Wt % is recommended.) IN U (heating) to 10 s 235 C (peak temperature) 210 C to 30 s 100 to 160 C 60 to 120 s (preheating) O NT Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow Time (s) (2) Dip soldering * Temperature * Time 10 seconds or less One (Allowed to be dipped in solder including plastic mold portion.) DI SC * Number of times 260 C or below (molten solder temperature) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between corrector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. 8 Data Sheet PN10258EJ01V0DS D 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 UE Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. IN CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Lead (Pb) Mercury < 1000 PPM Concentration contained in CEL devices -A Not Detected < 1000 PPM Not Detected < 100 PPM Not Detected SC O Cadmium Concentration Limit per RoHS (values are not yet fixed) NT Restricted Substance per RoHS Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. DI Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.