6200 Power entry modules without line filter https://www.schurter.com /PG05 IEC Appliance Inlet C14 with Fuseholder 1-pole, wired Screw-on mounting Snap-in version C14 See below: Approvals and Compliances 70 C Description - Panel mount : Screw-on version from front or rear side, snap-in version from front side - Appliance Inlet Protection class I , Fuseholder for fuse-links 5 x 20 mm 1pole - V-Lock notch standard - Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. - Solder terminals or quick connect terminals Characteristics - All single elements are already wired - Plug removal necessary for fuse-link replacement - Suitable for use in equipment according to IEC/UL 60950 Other versions on request - Types for rivet mounting available upon request References Alternative: version with line filter 5200 Alternative: Fuseholder 2-pole 6220 Weblinks pdf data sheet, html datasheet, General Product Information, DistributorStock-Check, Accessories, Detailed request for product, Landing Page Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Insulation cover Terminal Panel Thickness S Material: Housing 10 A / 250 VAC; 50 Hz 10 A / 250 VAC; 60 Hz > 2 kVAC between L-N > 2 kVAC between L/N-PE (1 min/50 Hz) -25 C to 70 C appliance inlet/-outlet from front side IP40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Solder terminals or quick connect terminals , tin-plated Screw: max 6 mm Mounting screw torque max 0.5 Nm Snap-in: 1/1.5/2/2.5/3 mm Thermoplastic, black, UL 94V-0 Rated Power Acceptance @ Ta 23 C Power Acceptance @ Ta > 23C Fuseholder C14 acc. to IEC 60320-1, UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 C, 10 A, Protection Class I 1-pole, Shocksafe category PC2 acc. to IEC 60127-6, UL 498, for fuse-links 5 x 20 mm 5 x 20: 2 W (1 pole) Admissible power acceptance at higher ambient temperature see derating curves Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Connectors 1 6200 Power entry modules without line filter https://www.schurter.com /PG05 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6200 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40036853 UL Approvals UL UL File Number: E93617 CCC Approvals CCC CCC Certificate Number: 2013010204594655 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/836 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification White paper Glow wire test 2 Connectors 6200 Power entry modules without line filter https://www.schurter.com /PG05 Dimensions [mm] Screw-on mounting 6.3x90 36 0.1 2.5 +0.2 0 31.5 34 30.8 0.1 3.5 M3 +0.05 5 E 27.4 - 0.10 27.5 max. R3 +0.2 0 36 44 E: Solder terminals 20.5 mm E: Quick connect terminals 23.5 mm Snap-in mounting 34 31.5 +0.2 0 S 0.1 30 E 3 max. R3 27.5 +0.2 0 E: solder terminals 22.5 mm E: quick-connect terminals 25.5 mm S: 1.0/1.5/2.0/2.5/3.0 mm Diagrams L L N E Connectors 3 6200 Power entry modules without line filter https://www.schurter.com /PG05 Derating Curves 1-pole Admissible power acceptance in Watt 2.0 1.5 I = 1.0 In I = 0.7 In 1.0 I = << In 0.5 0.0 0 20 40 60 80 100 Ambient air temperature Ta C All Variants Protection Class Panel mounting Panel Thickness s [mm] Fuseholder Terminal Internally wired I Snap-in 1 1-pole Quick connect terminals 4.8 x 0.8 mm l 6200.4210 I Snap-in 1.5 1-pole Quick connect terminals 4.8 x 0.8 mm l 6200.4215 I Snap-in 2 1-pole Quick connect terminals 4.8 x 0.8 mm l 6200.4220 I Snap-in 2.5 1-pole Quick connect terminals 4.8 x 0.8 mm l 6200.4225 I Snap-in 3 1-pole Quick connect terminals 4.8 x 0.8 mm l 6200.4230 I Snap-in 1 1-pole Quick connect terminals 6.3 x 0.8 mm l 6200.4310 I Snap-in 1.5 1-pole Quick connect terminals 6.3 x 0.8 mm l 6200.4315 I Snap-in 2 1-pole Quick connect terminals 6.3 x 0.8 mm l 6200.4320 I Snap-in 2.5 1-pole Quick connect terminals 6.3 x 0.8 mm l 6200.4325 I Snap-in 3 1-pole Quick connect terminals 6.3 x 0.8 mm l 6200.4330 I Snap-in 1 1-pole Solder terminals 3.8 x 0.8 mm l 6200.4110 I Snap-in 1.5 1-pole Solder terminals 3.8 x 0.8 mm l 6200.4115 I Snap-in 2 1-pole Solder terminals 3.8 x 0.8 mm l 6200.4120 I Snap-in 2.5 1-pole Solder terminals 3.8 x 0.8 mm l 6200.4125 I Snap-in 3 1-pole Solder terminals 3.8 x 0.8 mm l 6200.4130 I Screw - 1-pole Quick connect terminals 4.8 x 0.8 mm l 6200.2200 I Screw - 1-pole Quick connect terminals 6.3 x 0.8 mm l 6200.2300 I Screw - 1-pole Solder terminals 3.8 x 0.8 mm l 6200.2100 Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 4 50 Pcs Connectors Order Number 6200 Power entry modules without line filter https://www.schurter.com /PG05 Accessories Description Assorted Covers Rear Cover 0859.0047 4311.9403 Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Countersunk, B 4700.0002 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete 4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I 4787 4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder terminals or quick connect terminals, 10 A, Suitable for appliances with protection class I 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to 6200 Connector Overview complete 4022 4782 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4012 Mounting: Power Supply Cord, 3 x 1 mm, Screw clamps, Connector: IEC C13 4012 4785 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 Connector further types to 6200 ... 30.05.2019 4022 Mounting: Power Supply Cord, 3 x 1.5 mm, Screw clamps, Connector: IEC C13 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Connectors 5