FC Series Single Phase External Power Line Filter for Frequency Converters UL Recognized FC10 FC Series The FC filters provide filtering for frequency inverters and variable speed motor drives. Designed for very noisy applications, they attenuate conducted interference at low and high frequency ranges and protect programmable logic controllers from RF noise on the AC power line. These filters perform best when installed on the line side of the motor drive. The FC filters prevent noise from returning to the line, enabling equipment to meet strict European regulations on RFI. Suited for field wiring applications, these filters are ideal for EMC troubleshooting and field refurbishing. The FC filters feature side flanges for easy mounting and DIN type terminals which eliminate live metal parts, allowing safe and easy connection. The filters could also be sold as an accessory to motor drives marketed into Europe. Electrical Schematics 6 & 12 Amps 16, 25 & 36 Amps Specifications Maximum leakage current, each line-to-ground @ 120 VAC 60 Hz: @ 250 VAC 50 Hz: 3.8 mA 6.7 mA Hipot rating (one minute): line-to-ground line-to-line 2250 VDC 1450 VDC Operating frequency: 50/60 Hz Rated voltage: 120/250 VAC Rated current: 6FC10 12FC10 16FC10 25FC10 36FC10 @ 120/250 VAC 5 Amps 12 Amps 16 Amps 25 Amps 36 Amps Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit Current Rating .01 6FC10 12FC10 16FC10 25FC10 36FC10 9 5 4 2 0 .03 .05 Frequency-MHz .1 .5 1 5 10 30 19 17 15 14 6 37 37 36 36 27 50 65 70 70 70 40 60 70 70 70 35 35 35 48 50 26 25 22 22 14 65 65 65 75 68 65 65 65 75 75 Line-to-line in 50 ohm circuit Resistor location for reference only. FC 38 Current Rating .01 .03 .05 Frequency-MHz .1 .5 1 5 10 30 6FC10 12FC10 16FC10 25FC10 36FC10 10 14 14 14 14 10 14 14 14 14 60 51 55 42 42 50 70 70 70 70 45 45 45 50 50 35 30 29 17 17 75 75 75 75 75 75 75 75 75 75 60 75 75 70 70 Libertyville, IL (847) 680-7400 Series FC Case Styles Case Dimensions Metric shown in italics. Metric shown in italics. 6, 12, 16FC10 A Part No. (max) 6FC10, 12FC10, 16FC10 Phoenix contact VDFK4 Accepts 10 AWG solid wire, 12 AWG stranded wire Torque Spec: 5.5 - 7.0 in.lb. B (max) C (max) D E .020 (max) .51 F .010 .254 6FC10 4.6 116.8 3.1 78.7 1.78 45.21 2.677 67.8 3.7 94.0 2.0 50.8 12FC10 5.95 151.3 3.96 100.6 2.18 55.4 3.5 88.9 4.53 114.8 2.0 50.8 16FC10 5.95 151.3 3.96 100.6 2.18 55.4 3.5 88.9 4.53 114.8 2.0 50.8 25FC10 6.9 175.3 5.48 139.2 2.55 64.77 4.9 124.5 5.94 150.9 2.756 70.0 36FC10 6.9 175.3 5.48 139.2 2.55 64.77 4.9 124.5 5.94 150.9 2.756 70.0 Ordering Information Consult your local Corcom sales representative for pricing. 25, 36FC10 Available Part Numbers 6FC10 12FC10 16FC10 25FC10 36FC10 25FC10, 36FC10 Phoenix contact VDFK6 Accepts 8 AWG solid wire, 10 AWG stranded wire Torque Spec: 13.5 - 16 in.lb. Libertyville, IL (847) 680-7400 FC 39