SBR10100CTL
Document number: DS31206 Rev. 3 - 2 1 of 4
www.diodes.com December 2011
© Diodes Incorporated
SBR10100CTL
NEW PRODUCT
SBR is a registered trademark of Diod es Incorporated
10A SBR®
SUPER BARRIER RECTIFIER
Features
• Low Forward Voltage Drop
• Excellent High Temperature Stability
• Patented Super Barrier Rectifier Technology
• Soft, Fast Switching Capability
• Lead Free Finish, RoHS Compliant (Note 1)
• “Green” Molding Compound (No Br, Sb)
Mechanical Data
• Case: TO252
• Case Material: Molded Plastic, UL Flammability Classification
Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Matte Tin Finish annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
• Weight: 0.37 grams (approximate)
Ordering Information (Note 2)
Part Number Case Packaging
SBR10100CTL-13 TO252 2500 pieces/reel
Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes
2. For packaging details, go to our website at http://www.diodes.com.
Marking Information
Top View Package Pin-Out Configuration
2
1
3
SBR10100CT = Product Type Marking Code
A
B = Foundry and Assembly Code
YYWW = Date Code Marking
YY = Last two digits of year (ex: 09 = 2009)
WW = Week (01 - 53)
YYWW AB
10100CT
SBR
SBR10100CTL
Document number: DS31206 Rev. 3 - 2 2 of 4
www.diodes.com December 2011
© Diodes Incorporated
SBR10100CTL
NEW PRODUCT
SBR is a registered trademark of Diod es Incorporated
Maximum Ratings (Per Leg) @TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VRM 100 V
RMS Reverse Voltage VR
(
RMS
)
71 V
Average Rectified Output Current Per Device
IO 10 A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load IFSM 110 A
Thermal Characteristics (Per Leg)
Characteristic Symbol Value Unit
Typical Thermal Resistance (Note 4) R
θ
JC 22 ºC/W
Operating and Storage Temperature Range TJ, TSTG -65 to +175 ºC
Electrical Characteristics (Per Leg) @TA = 25°C unless otherwise specified
Characteristic Symbol Min Typ Max Unit Test Condition
Forward Voltage Drop VF -
- 0.77
0.63 0.84
0.71 V IF = 5A, TJ = 25ºC
IF = 5A, TJ = 125ºC
Leakage Current (Note 3) IR -
- -
- 0.2
25 mA VR = 100V, TJ = 25ºC
VR = 100V, TJ = 125ºC
Notes: 3. Short duration pulse test used to minimize self-heating effect
4. Device mounted on FR-4 substrate PC board, 1oz copper .with minimum recommended pad layout.
5. Device mounted on Polymide substate, 1*MRP, 2oz, copper, PC boards.
0012345
I AVERAGE FORWARD CURRENT (A)
Fig. 1 Forward Power Dissipation
F(AV)
P
,
P
O
WE
R
DISSI
P
A
T
I
O
N
(W)
D
0.5
1.0
1.5
2.0
2.
5
0.0010 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
I, INS
T
AN
T
ANE
O
U
S F
O
R
WA
R
D
C
U
R
R
EN
T
(A)
F
Fig. 2 Typical Forward Characteristics
V , INSTANTANEOUS FORW ARD VOLTAGE (V)
F
0.01
0.1
1
10
100
T = 25°C
A
T = 85°C
A
T = 125°C
A
T = 150°C
A
T = 175°C
A
SBR10100CTL
Document number: DS31206 Rev. 3 - 2 3 of 4
www.diodes.com December 2011
© Diodes Incorporated
SBR10100CTL
NEW PRODUCT
SBR is a registered trademark of Diod es Incorporated
0.01 020406080100
I, I
N
S
T
A
N
T
A
N
E
O
U
S
R
EVE
R
SE
C
U
R
R
E
N
T
(µA)
R
Fig. 3 Typical Reverse Characteristics
V , INSTANTANEOUS REVERSE VOLT AGE (V)
R
0.1
1
10
100
1,000
10,000
T = 25°C
A
T = 85°C
A
T = 125°C
A
T = 150°C
A
T = 175°C
A
T = -55°C
A
0
2
I , A V ERAGE FORWARD CURRENT (A)
F(AV)
4
6
1
3
5
25 50 75 100 125 150 175
T , AMBIENT TEMPERA TURE (°C)
A
Fig. 4 Forward Current Derating Curve
Note 5
Note 4
Package Outline Dimensions
Suggested Pad Layout
TO252
Dim Min Max Typ
A 2.19 2.39 2.29
A1 0.00 0.13 0.08
A2 0.97 1.17 1.07
b 0.64 0.88 0.783
b2 0.76 1.14 0.95
b3 5.21 5.46 5.33
c2 0.45 0.58 0.531
D 6.00 6.20 6.10
D1 5.21 − −
e − − 2.286
E 6.45 6.70 6.58
E1 4.32 − −
H 9.40 10.41 9.91
L 1.40 1.78 1.59
L3 0.88 1.27 1.08
L4 0.64 1.02 0.83
a 0° 10° −
All Dimensions in mm
Dimensions Value (in mm)
Z 11.6
X1 1.5
X2 7.0
Y1 2.5
Y2 7.0
C 6.9
E1 2.3
X2
CZ
X1
Y1
E1
Y2
b3
E
2X b2
D
L4
Ac2
e
A1
L
L3
3X b a
H
A2 E1
SBR10100CTL
Document number: DS31206 Rev. 3 - 2 4 of 4
www.diodes.com December 2011
© Diodes Incorporated
SBR10100CTL
NEW PRODUCT
SBR is a registered trademark of Diod es Incorporated
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Cus tomer or user of this document or prod ucts described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated p roducts for any unintended or una uthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign p atents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the e xpress
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their pro ducts and an y
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2011, Diodes Incorporated
www.diodes.com
