M185XTN01.2 - AU Optronics Corporation

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 1

M185XTN01.2

( V

) Preliminary Specification

( ) Final Specification

Module 18.5” Color TFT-LCD

Model Name M185XTN01.2

Customer Date

Approved by

Note: This Specification is subject to

change without notice.

Approved by Date

Chiyin Wu

Prepared by

Glenn Chan

2012/5/9

Desktop Display Business Group /

AU Optronics corporation

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 2

M185XTN01.2

Contents

1.0 Handling Precautions............................................................. 4

2.0 General Description ............................................................... 5

2.1 Display Characteristics .............................................................................................................. 5

2.2 Optical Characteristics............................................................................................................... 6

2.3 Mechanical Characteristics ..................................................................................................... 10

3.0 Functional Block Diagram .................................................... 11

4.0 Absolute Maximum Ratings ......................................................... 12

4.1 TFT LCD Module ........................................................................................................................ 12

4.2 Backlight Unit .............................................................................................................................. 12

4.3 Absolute Ratings of Environment.................................................................................................. 12

5.0 Electrical characteristics...................................................... 14

5.1 TFT LCD Module ...................................................................................................................... 14

5.1.1 Power Specification...................................................... 14

5.1.2 Signal Electrical Characteristics ................................... 15

5.2 Backlight Unit .............................................................................................................................. 17

6.0 Signal Characteristic............................................................ 18

6.1 Pixel Format Image .................................................................................................................. 18

6.2 The input data format ............................................................................................................... 18

6.3 Signal Description .................................................................................................................... 19

6.4 Timing Characteristics .................................................................................................................. 21

6.5 Timing diagram ......................................................................................................................... 22

6.6 Power ON/OFF Sequence....................................................................................................... 23

7.0 Connector & Pin Assignment................................................ 24

7.1 TFT LCD Module ...................................................................................................................... 24

7.1.1 Pin Assignment ............................................................ 24

7.2 LED Connector on Backlight Unit................................................................................................ 25

7.2.1 LED Pin assignment...................................................... 25

7.2.2 LED Connector dimension............................................. 26

7.2.3 LED Mating housing dimension..................................... 26

8.0 Reliability Test..................................................................... 27

9.0 Shipping Label ..................................................................... 28

10.0 Mechanical Characteristics................................................. 29

11. Packing Specification........................................................... 30

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 3

M185XTN01.2

Record of Revision

Version and Date

Page

Old description New Description Remark

0.1

2012/05/09 Preliminary Version

31

Update label positions.

13 Logic/LCD Drive Voltage VDD: +5.5V

Logic/LCD Drive Voltage VDD: +6.0V

15 5.1.1 Power specification Irush

Max. :2A

5.1.1 Power specification Irush Max. :

TBD

22 6.4 Timing characteristics

Clock: Max. 90 MHz

6.4 Timing characteristics

Clock: Max. 94 MHz

0.2

2012/6/18

25

6 “Energy Star 6.0 Compliance” : Yes Remove “Energy Star 6.0 Compliance”

because it’ll be tested not with panel

only but completed set.

0.3

2012/7/4

27 Altitude test: Operation 15,000ft

Altitude test: Operation 18,000ft

0.3

2012/7/9

6 Color / Chromaticity Coordinates (CIE)

Color / Chromaticity Coordinates (CIE)

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 4

M185XTN01.2

1.0 Handling Precautions

1) Since front polarizer is easily damaged, pay attention not to scratch it.

2) Be sure to turn off power supply when inserting or disconnecting from input connector.

3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.

4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.

5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.

6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth

when handling.

7) Do not open or modify the Module Assembly.

8) Do not press the reflector sheet at the back of the module to any directions.

9) In case if a Module has to be put back into the packing container slot after once it was taken

out from the container, do not press the center of the LED lightbar edge. Instead, press at the

far ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged.

10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the

Interface Connector of the TFT Module.

11) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module

even momentary. At designing the enclosure, it should be taken into consideration that no

bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT

Module may be damaged.

12) Small amount of materials having no flammability grade is used in the LCD module. The LCD

module should be supplied by power complied with requirements of Limited Power Source

(IEC60950 or UL1950), or be applied exemption.

13) Please avoid touching COF contact while handling or fitting the TFT module into your system.

14) When storing modules as spares for a long time, the following precaution is necessary:

Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep

the temperature between

5℃ and 35℃ at normal humidity.

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 5

M185XTN01.2

2.0 General Description

This specification applies to the 18.5 inch-wide Color a-Si TFT-LCD Module M185XW01.The

display supports the WXGA - 1366(H) x 768(V) screen format and 16.7M colors (RGB 6-bits +

Hi-FRC data). All input signals are 1-channel LVDS interface and this module doesn’t contain an

inverter board for backlight.

2.1 Display Characteristics

The following items are characteristics summary on the table under 25

℃

condition:

ITEMS Unit SPECIFICATIONS

Screen Diagonal [mm]

470.1(18.51”)

Active Area [mm] 409.8 (H) x 230.4 (V)

Pixels H x V 1366(x3) x 768

Pixel Pitch [um] 300 (per one triad) × 300

Pixel Arrangement R.G.B. Vertical Stripe

Display Mode TN Mode, Normally White

White Luminance ( Center ) [cd/m

2

] 250 cd/m

2

(Typ.)

Contrast Ratio 1000 (Typ.)

Optical Response Time [msec] 5ms (Typ., on/off)

Nominal Input Voltage VDD [Volt] +5.0 V (Typ)

Power Consumption

(VDD line + LED line)

[Watt]

VDD line: PDD (typ)= 1.75W, All black pattern at 60Hz

LED line : PBLU (typ) = 7.2W

Total: 8.95W

Weight [Grams] 1290

(Typ)

Physical Size [mm] 430.4 (W) x 254.6 (H) Typ. x 9.9 (D) Typ

Interface One channel LVDS

Support Color 16.7M colors (RGB 6-bit + Hi_FRC )

Surface Treatment Anti-Glare, 3H

Temperature Range

Operating

Storage (Shipping)

[

o

C]

[

o

C]

0 to +50

-20 to +60

TCO6.0 Compliance Yes

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 6

M185XTN01.2

2.2 Optical Characteristics

The optical characteristics are measured under stable conditions at 25

℃

:

Item Unit Conditions Min. Typ. Max. Note

Horizontal (Right)

CR = 10 (Left)

75

85

-

Viewing Angle [degree]

Vertical (Up)

CR = 10 (Down)

70

80

-

2

Contrast ratio Normal Direction

600

1000 - 3

Raising Time (T

rR

) - 3.6 -

Falling Time (T

rF

) - 1.4 -

Response Time [msec]

Raising + Falling - 5 -

4

Red x 0.616

0.646

0.676

Red y 0.303

0.333

0.363

Green x 0.287

0.317

0.347

Green y 0.595

0.625

0.655

Blue x 0.124

0.154

0.184

Color / Chromaticity

Coordinates (CIE)

Blue y 0.031

0.061

0.091

White x 0.283 0.313

0.343

Color Coordinates (CIE) White

White y 0.299 0.329

0.359

5

Central Luminance [cd/m

2

]

200 250 - 6

Luminance Uniformity [%] 75 80 - 7

Crosstalk (in 60Hz) [%] 1.5 8

Flicker dB -20 9

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 7

M185XTN01.2

Note 1: Measurement method

The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt

temperature change during measuring (at surface 35 )

℃

. In order to stabilize the luminance, the

measurement should be executed after lighting Backlight for 30 minutes in a stable, windless and

dark room.

Note 2: Definition of viewing angle measured by ELDIM (EZContrast 88)

Viewing angle is the measurement of contrast ratio

≧

10, at the screen center, over a 180°

horizontal and 180° vertical range (off-normal viewing angles). The 180° viewing angle range is

broken down as follows; 90° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and low

(down). The measurement direction is typically perpendicular to the display surface with the screen

rotated about its center to develop the desired measurement viewing angle.

Center of the screen

TFT

-

LCD

Measured distance

Photo detector

LCD Panel

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 8

M185XTN01.2

Note 3: Contrast ratio is measured by TOPCON SR-3

Note 4: Definition of Response time measured by Westar TRD-100A

The output signals of photo detector are measured when the input signals are changed from “Full

Black” to “Full White” (rising time, T

rR

), and from “Full White” to “Full Black” (falling time, T

rF

),

respectively. The response time is interval between the 10% and 90% (1 frame at 60 Hz) of

amplitudes.

T

rR

+ T

rF

= 5 msec (typ.).

Note 5: Color chromaticity and coordinates (CIE) is measured by TOPCON SR-3

Note 6: Central luminance is measured by TOPCON SR-3

Note 7: Luminance uniformity of these 9 points is defined as below and measured by

TOPCON SR-3

9)-(1 Points 9in LuminanceMaximum

9)-(1 points 9in LuminanceMinimum

Uniformity =

100

90

10

0

%

Optical

response

White

T

rF

100

10

0

%

Optical

response

White

Black

1 Frame

T

rR

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 9

M185XTN01.2

Note 8: Crosstalk is defined as below and measured by TOPCON SR-3

CT = | YB – YA | / YA

×

100 (%)

Where

YA = Luminance of measured location without gray level 0 pattern (cd/m2)

YB = Luminance of measured location with gray level 0 pattern (cd/m2)

Note 9: Test Patern: Subchecker Pattern measured by TOPCON SR-3

R

G

B

R

G

B

R

G

B

R

G

B

R

G

B

R

G

B

Method: Record dBV & DC value with TRD-100

Level

DC

Hz) 30Level(at AC

log20(dB)Flicker =

Gray Level = L127

Gray Level = L0

Amplitude

Time

DC

AC

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 10

M185XTN01.2

2.3 Mechanical Characteristics

Item Unit

Min.

Note

Compression Endurance [Kgf]

2.5

1

Note 1: Test Method

 The point is at a distance from right-downside 25mm x 25mm defined as the Start Point of

Measure Points, and the point is at a distance 25mm from left-side & around 10mm from

PCB defined as the End Point.

 Align 50mm x 50mm block from Start Point on the Bezel Back, and the corners of each

block are Measure Points.

 If the distance from the last block to each side of the End Point

≧

25mm, add other blocks

to make sure that most area of Bezel Back can be measured.

PCB

10mm

25mm

Start Point

25mm

End Point

≧

≧≧

≧

25mm

≧

≧≧

≧

25mm

50mm

The last block

PCB

10mm

25mm

Start Point

25mm

End Point

≧

≧≧

≧

25mm

≧

≧≧

≧

25mm

50mm

The last block

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 11

M185XTN01.2

3.0 Functional Block Diagram

The following diagram shows the functional block of the 18.5 inch Color TFT-LCD Module:

I/F + X-PCB

I/F PCB Interface:

MSCKT2407P30HB (STM) / AL230F-A0G1D-P (P-TWO)

Mating Type:

FI-X30HL(JAE) (Locked Type)

FI-X30H (JAE)(Unlocked Type)

TFT-LCD

1366(x3) x 768

Pixels

G1

G768

D1 D4098

LED

Driver

DC

Connector

DC/DC

Converter

LVDS

Receiver

Timing

Controller

mini

Transmitter

Gamma

Correction

AUO

ASIC

LVD

S

+5V

X

-

Driver IC

Y-Driver IC

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 12

M185XTN01.2

4.0 Absolute Maximum Ratings

Absolute maximum ratings of the module are as following:

4.1 TFT LCD Module

4.2 Backlight Unit

Item Symbol

Min Max Unit Conditions

IRLED1

IRLED2

IRLED3

LED

F

orward Current

IRLED4

0 90 [mA] Note 1,2,5

100% duty

IPLED1

IPLED2

IPLED3

LED

Pulse

Forward Current

IPLED4

- 150 [mA] Note 1,2,5

10% duty @100Hz

LED forward Voltage variation

(per string variation)

Δ

Vf - 3.4 [Volt] Note 1,2

4.3 Absolute Ratings of Environment

Note 1: With in Ta (25

℃

)

Note 2: Permanent damage to the device may occur if exceeding maximum values

Note 3: Temperature and relative humidity range are shown as the below figure.

1. 90% RH Max ( Ta

≦39℃)

2. Max wet-bulb temperature at 39

℃ or less. ( Ta ≦39℃)

3. No condensation

Note 4: Function Judged only

Note 5: IRLED1,2,3,4 and IPLED1,2,3,4 define as per strings LED current.

Item Symbol Min Max Unit Conditions

Logic/LCD Drive

Voltage VDD 0 +6.0 [Volt] Note 1,2

Item Symbol Min. Max. Unit Conditions

Operating Temperature TOP 0 +50 [

o

C] Note 3

Glass surface temperature

(operation) TGS 0 +65 [

o

C] Note 3, Note 4

Operation Humidity HOP 5 90 [%RH]

Storage Temperature TST -20 +60 [

o

C]

Storage Humidity HST 5 90 [%RH]

Note 3

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 13

M185XTN01.2

Operating Range Storage Range

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 14

M185XTN01.2

5.0 Electrical characteristics

5.1 TFT LCD Module

5.1.1 Power Specification

Input power specifications are as following:

Note 1: Measurement conditions:

The duration of rising time of power input is 470us.

+5.0V

+12.0V

VCC

R1

47K

R2

1K

VR1

47K

SW1

SW MAG-SPST

1 2

F1

Q3

AO6402

G

D2S

D1

D5

D6

C1

1uF/16V

Q3

AO6402

G

D2 S

D1

D5

D6

C3

0.01uF/25V

C2

1uF/25V

(High to Low)

Control

Signal

(LCD Module Input)

Symbol Parameter Min Typ Max Unit Conditions

VDD Logic/LCD Drive

Voltage

4.5

5.0

6

[Volt] +/-10%

- 0.35 0.42 [A] VDD= 5.0V, All Black Pattern

At 60Hz,

IDD Input Current

- 0.42 0.5 VDD= 5.0V, All Black Pattern At 75Hz

- 1.75 2.1 [Watt] VDD= 5.0V, All Black Pattern At 60Hz

PDD

VDD Power

- 2.1 2.5 VDD= 5.0V, All Black Pattern At 75Hz

IRush Inrush Current - - TBD [A] Note 1

VDDrp Allowable Logic/LCD

Drive Ripple Voltage

- - 350 [mV] p-p

VDD= 5.0V, All Black Pattern At 75Hz

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 15

M185XTN01.2

5.1.2 Signal Electrical Characteristics

Input signals shall be low or Hi-Z state when VDD is off. Please refer to specifications of

SN75LVDS82DGG (Texas Instruments) in detail.

1. DC Characteristics of each signal are as following:

Symbol Parameter Min Typ Max Units

Condition

VTH Differential Input High

Threshold - - +100

[mV] VCM = 1.2V

Note 1

VTL Differential Input Low

Threshold -100 - - [mV] VCM = 1.2V

Note 1

│

VID

│

Input Differential Voltage 100 - 600 [mV] Note 1

VCM Differential Input Common

Mode Voltage +1.0 +1.2 +1.5 [V] VTH-VTL = 200MV (max)

Note 1

Note 1: LVDS Signal Waveform

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 16

M185XTN01.2

2. AC Characteristics

Description Symbol

Min Max Unit Note

Maximum deviation of input

clock frequency during SSC

FDEV -

±

±±

±

3 %

Maximum modulation frequency

of input clock during SSC

FMOD - 200 KHz

1

F

MOD

Freq

F

max

F

center

F

min

F

center

* F

DEV

< Spread

Spectrum>

time

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 17

M185XTN01.2

5.2 Backlight Unit

Parameter guideline for LED driving is under stable conditions at 25

℃

(Room Temperature):

Symbol Description Min.

Typ.

Max.

Unit Note

IRLED1

IRLED2

IRLED3

IRLED4

LED Operation Current 67 70 73 [mA] Note 1

VLED Light Bar Operation Voltage 24 25.6 27.2 [Volt]

Note 2

PBLU BLU Power Consumption 6.4 7.2 7.9 [Watt]

Note 3

LTLED LED Life Time (Typical) 30,000

- - [Hour]

Note 4

Each module consists of 32 pcs LED ( 4 strings x 8 pcs / string )

Note 1 : The specified current is 100% duty of LED chip input current, IRLED1,2,3,4 define as per

strings LED current.

Note 2 : The value showed in the table is one light bar’s operation voltage.

Note 3 : PBLU = VLED *( IRLED1+IRLED2+IRLED3+IRLED4)

Note 4: Definition of life time: Brightness becomes to 50% of its original value. The minimum life

time of LED unit is on the condition of IRLED = 70mA and 25±2°C (Room Temperature).

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 18

M185XTN01.2

6.0 Signal Characteristic

6.1 Pixel Format Image

Following figure shows the relationship of the input signals and LCD pixel format.

R

G

B

R

G

B

R

G

B

R

G

B

R

G

B

R

G

B

R

G

B

R

G

B

1

2

1

365

1

366

1st Line

768

Line

6.2 The input data format

LVDS Data Mapping of NS Format

Note1: Normally, DE, VS, HS on EVEN channel are not used.

Note2: 8-bits signal input.

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 19

M185XTN01.2

6.3 Signal Description

PIN #

SIGNAL NAME

DESCRIPTION

1 NC No contact (For AUO internal use)

2 NC No contact (For AUO internal use)

3 NC No contact (For AUO internal use)

4 GND

Power Ground

5 RXIN0-

Negative LVDS differential data input (0)

6 RXIN0+

Positive LVDS differential data input (0)

7 GND Power Ground

8 RXIN1- Negative LVDS differential data input (1)

9 RXIN1+ Positive LVDS differential data input (1)

10 GND Power Ground

11 RXIN2-

Negative LVDS differential data input (2)

12 RXIN2+

Positive LVDS differential data input (2)

13 GND Power Ground

14 RXCLKIN-

Negative LVDS differential clock input (clock)

15 RXCLKIN+

Positive LVDS differential data input (clock)

16 GND Power Ground

17 RXIN3-

Negative LVDS differential data input (3)

18 RXIN3+

Positive LVDS differential data input (3)

19 GND

Power Ground

20 NC No contact (For AUO internal use)

21 NC No contact (For AUO internal use)

22 NC No contact (For AUO internal use)

23 GND

Power Ground

24 GND

Power Ground

25 GND

Power Ground

26 VCC +5V power supply

27 VCC +5V power supply

28 VCC +5V power supply

29 VCC +5V power supply

30 VCC +5V power supply

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 20

M185XTN01.2

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 21

M185XTN01.2

6.4 Timing Characteristics

Basically, interface timing described here is not actual input timing of LCD module but close to

output timing of SN75LVDS82DGG (Texas Instruments) or equivalent.

Signal

Item

Symbol

Min

Typ

Max

Unit

Period Tv 776 808 1023 Th

Active Tdisp(v) 768 768 768 Th

V-section

Blanking

Tblk(v) 8 40 255 Th

Period Th 1416

1606 2047 Tclk

Active Tdisp(h) 1366 1366 1366 Tclk

H-section

Blanking

Tblk(h) 50 240 681 Tclk

Period Tclk - 12.8 - ns

Clock

ClockClock

Clock

Frequency

Freq 55 78 94 MHz

Frame Rate

Frame RateFrame Rate

Frame Rate

Frame

Rate

F

50 60 75 Hz

Note1 : DE mode only

Note2 : Clock Frequency 94MHz(Max.)= 1480(H)*847(V)*75Hz

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 22

M185XTN01.2

6.5 Timing diagram

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 23

M185XTN01.2

6.6 Power ON/OFF Sequence

VDD power and lamp on/off sequence are as follows. Interface signals are also shown in the

chart. Signals from any system shall be Hi-Z state or low level when VDD is off.

Power Sequence Timing

Value

Parameter Min. Typ. Max. Unit

T1 0.5 - 10 [ms]

T2 0 - 50 [ms]

T3 500 - - [ms]

T4 100 - - [ms]

T5 0 50 [ms]

Note1,2

T6 5 - 100 [ms]

Note1,2

T7 1000 - - [ms]

Note1 : Recommend setting T5 = 0ms to avoid electronic noise when VDD is off.

Note2 : During T5 and T6 period , please keep the level of input LVDS signals with Hi-Z state.

T7

T

5

T2

T3

VALID

DATA

T1

10%

90%

10%

90%

T4

T

6

Power Supply VDD

LVDS Signal

Backlight On

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 24

M185XTN01.2

7.0 Connector & Pin Assignment

Physical interface is described as for the connector on module. These connectors are capable of

accommodating the following signals and will be following components.

7.1 TFT LCD Module

Connector Name / Designation Interface Connector / Interface card

Manufacturer STM or P-TWO

Type Part Number

MSCKT2407P30HB (STM) / AL230F-A0G1D-P

(P-TWO)

Mating Housing Part Number FI-X30HL(JAE) (Locked Type)

FI-X30H (JAE)(Unlocked Type)

7.1.1 Pin Assignment

Pin# Signal Name Pin# Signal Name

1 NC 2 NC

3 NC 4 GND

5

RXIN0-

6

RXIN0+

7

GND

8

RXIN1-

9

RXIN1+

10

GND

11

RXIN2-

12

RXIN2+

13

GND

14

RXCLKIN-

15

RXCLKIN+

16

GND

17

RXIN3-

18

RXIN3+

19

GND

20 NC

21 NC 22 NC

23

GND

24

GND

25

GND

26 VCC

27 VCC 28 VCC

29 VCC 30 VCC

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 25

M185XTN01.2

7.2 LED Connector on Backlight Unit.

This connector is mounted on LED light-bar.

Connector Name / Designation Light Bar Connector

Manufacturer

ENTERY (E&T)

Corporation

Mating Type Part Number

3707K-Q06N-01R

(Wire harness)

7.2.1 LED Pin assignment

Pin# Signal Name

1 IRLED1 (current out)

2 IRLED2 (current out)

3 VLED (voltage in)

4 VLED (voltage in)

5 IRLED3 (current out)

6 IRLED4 (current out)

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 26

M185XTN01.2

7.2.2 LED Connector dimension

)(0.1,25.400.39.13 mmunitPitchDVH

=

×

=

×

)(0.1,25.400.39.13 mmunitPitchDVH

=

×

=

×

7.2.3 LED Mating housing dimension

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 27

M185XTN01.2

8.0 Reliability Test

Environment test conditions are listed as following table.

Items Required Condition Note

Temperature Humidity Bias (THB) Ta= 50

℃

, 80%RH, 300hours

High Temperature Operation (HTO)

Ta= 50

℃

, 50%RH, 300hours

Low Temperature Operation (LTO)

Ta= 0

℃

, 300hours

High Temperature Storage (HTS) Ta= 60

℃

, 300hours

Low Temperature Storage (LTS) Ta= -20

℃

, 300hours

Vibration Test

(Non-operation)

Acceleration: 1.5 Grms

Wave: Random

Frequency: 10 - 200 Hz

Duration: 30 Minutes each Axis (X, Y, Z)

Shock Test

(Non-operation)

Acceleration: 50 G

Wave: Half-sine

Active Time: 20 ms

Direction:

±

X,

±

Y,

±

Z (one time for each Axis)

Drop Test Height: 46 cm, package test

Thermal Shock Test (TST) -20

℃

/30min, 60

℃

/30min, 100 cycles

1

On/Off Test On/10sec, Off/10sec, 30,000 cycles

Contact Discharge: ± 15KV, 150pF(330Ω ) 1sec,

15 points, 25 times/ point.

ESD (Electro Static Discharge)

Air Discharge: ± 15KV, 150pF(330Ω ) 1sec

15 points, 25 times/ point.

2

Altitude Test Operation:18,000 ft

Non-Operation:40,000 ft

Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid

temperature change. A cycle of rapid temperature change consists of varying the temperature from

-2

0℃

to 6

0℃

, and back again. Power is not applied during the test. After temperature cycling, the

unit is placed in normal room ambient for at least 4 hours before power on.

Note 2: EN61000-4-2, ESD class B:

Certain performance degradation allowed

No data lost

Self-recoverable

No hardware failures.

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 28

M185XTN01.2

9.0 Shipping Label

The label is on the panel as shown below:

Note 1: For Pb Free products, AUO will add for identification.

Note 2: For RoHS compatible products, AUO will add for identification.

Note 3: For China RoHS compatible products, AUO will add for identification.

Note 4: The Green Mark will be presented only when the green documents have been ready by

AUO Internal Green Team.

Manufactured: XX/XX

Model No: M185XTN01.2

AU Optronics

Made in XXXXX

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 29

M185XTN01.2

10.0 Mechanical Characteristics

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 30

M185XTN01.2

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 31

M185XTN01.2

11. Packing Specification

單層

單層單層

單層

pallet

打棧示意圖

打棧示意圖打棧示意圖

打棧示意圖

M185 14

片裝

片裝片裝

片裝

:48.5*37.2*34.8cm

料號

料號料號

料號

:

Carton:81.18M02.008 /Cushion:84.18M02.037

將

M185

模組置入靜電袋中並折疊後

依序放入包裝隔板中放置

14

片，放入上蓋緩衝，封箱完成

AU OPTRONICS CORPORATION

Product Specification

document version 0.2 32

M185XTN01.2

Pallet and shipment information

Specification

Item

Q'ty

Dimension

Weight(kg)

Remark

1

Panel

1

430.37(H)mm x 254.6(V)mm x 9.9(D)mm

1.330

2

Cushion

1

-

1.

125

3

Box

1

485(L)mm x 372(W)mm x 348(H)mm

1.00

without Panel & cushion

4

Packing Box

14 pcs/Box

485(L)mm x 372(W)mm x 348(H)mm

20.745

with panel & cushion

5

Pallet

1

1150(L)mm x

98

0(W)mm x 138(H)mm

15

6

Pallet after Packing

2

4

boxes/pallet

1150(L)mm x

98

0(W)mm x 138(H)mm

509