Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
AQ-A (AQAD5)
ASCTB324E 201211-T
RATING
1. Ratings (Measurement condition: at 20°C 68°F, Input ripple: 1% or less)
2. Characteristics (Measurement condition: at 20°C 68°F, Input ripple: 1% or less)
REFERENCE DATA
1. Load current vs. ambient temperature characteristics
Use load current within range specified in the figure below.
Tested condition
Item Part No. AQAD551DL Remarks
Input side
Input voltage 4 to 32V DC
Input current Max. 20mA
Drop-out voltage Min. 1V
Output side
Max. load current (DC) 30A
Peak load current 80A 100 ms (1 shot), VL = DC
Load voltage (DC) 100V Absolute maximum rating
“OFF-state” leakage current Max. 100µA 100V DC
“ON” resistance Max. 20mΩat Max. carrying current
Max. power dissipation 20W
Item AQAD551DL Remarks
Operate time Max. 10ms
Release time Max. 3ms
Insulation resistance 100MΩ between input and output at 500V DC
Breakdown voltage 4,000 Vrms between input and output
2,500 Vrms between input, output and case for 1min.
Vibration resistance 10 to 55Hz double amplitude of 1.5mm .059inch X, Y, Z axes
Shock resistance Min. 980 m/s2X, Y, Z axes
Ambient temperature –20°C to +80°C –4°F to +176°FNon-condensing at low temperatures
Storage temperature –20°C to +85°C –4°F to +185°FNon-condensing at low temperatures
Max. switching frequency 0.5 times/s Vin: 4 V, duty: 50%, IL × VL: 3,000 (V·A)
With external heat sink
When using slim heat sink (AQP-HS-SJ20A)
1) If attached to a heat sink, use a heat conductive
compound (Ex. Momentive Performance Materials
Inc. YG6111 or TSK5303) of similar coating to
improve cooling.
Without external heat sink
If the mounting surface is not metallic and a heat sink
is not used, expose the bottom surface and plate
surface to improve heat dissipation.
(1) 30A type (AQAD511DL) 2. Max. switching frequency vs. load voltage ×
load current characteristics
Ambient temperature: 20°C 68°F
100
Ambient temperature, °C
When using slim heat sink
(AQP-HS-SJ20A)
When using as stand-alone
Load current, A
806040200-20
40
32
24
16
8
0
Duty = 50%
Load voltage, V × load current, A
Max. switching frequency, time/s
300022501500750
0
10
9
8
7
6
5
4
3
2
1
3. Input current vs. input voltage characteristics
35302520151050
20
16
12
8
4
0
Input voltage, V
Input current, mA