Products and specifications subject to change without notice.
Order/Technical Support – Tel: (800) 677-5311 / FAX: (800) 677-3865 / www.crouzet-usa.com
3/6
Subminiature Switches Series 83 170 DIN 41 635 B
For other forces, actuators, connections and temperatures,
please consult us.
Other information
General specifications
Layout Components
Approvals: NF - UL - cUL
Operating curve
For type 83 170 0 For type 83 170 4
Material
- Case : polyester UL 94 VO
- Button : glass-filled polyamide
-Contacts : AgNi,
gold-plated AgNi (dual-current)
- Terminals : copper-nickel
Actuators
- flat : stainless steel
- roller : stainless steel with polyamide roller
Resistive circuit:
Number of
operations
= 5 ms
cos ϕ= 0.8
L
R
Rating in
Amps
Inductive circuit
{
Resistive circuit:
Number of
operations
= 5 ms
cos ϕ= 0.8
L
R
Rating in
Amps
Inductive circuit
{
c
a
c
a
Resistive circuit:
Number of
operations
Mechanical
life
Rating in
Amps
For type 83 170 9
Model 83 170 9 is designed to operate equally well on dual-current
(1 mA 4 V minimum) or medium-current (5 A maximum) circuits.
However, a given product should only be used to switch one type of
circuit during its working life.
Mechanical
life Mechanical
life
Part numbers for standard actuators
Actuators – Length mm (in.)
Part numbers for standard products (no lever) terminal type
Mounting positions
Coefficient
Tripping point mm (in.)
Mechanical characteristics
Operating force - max. N (oz.)
Release force - min. N (oz.)
Total travel force - max. N (oz.)
Permitted overtravel force - max. N (oz.)
Maximum rest position mm (in.)
Tripping point mm (in.)
Differential travel mm (in.)
Overtravel - min. mm (in.)
Ambient operating temperature °C
Mechanical endurance Operations
Contact gap mm (in.)
Weight g (oz.)
C(Form C) SPDT
B(Form B) SPNC not available in PC terminals
A(Form A) SPNO not available in PC terminals
Electrical characteristics Nominal A
Thermal A
Types
Actuators and mounting positions
Contact type
Features
Current rating at 250 V
Connections
Mounting positions
Except where otherwise indicated, actuators are supplied unmounted.
For factory mounting, specify mounting position L or R.
–To calculate force : take the force quoted for the switch and divide by
the coefficient given in the table.
–To calculate travel : take the travel quoted for the switch and multiply
by the same coefficient.
1
2
3
Normally stocked items Catalog products produced
to order
Mounting accessories for PCB mounting: 5 / 6 / 7 / 8
See page 3/9.