ALUMINUM ELECTROLYTIC CAPACITORS HZ Ultra Low Impedance series Lower impedance than HN series. Adapted to the RoHS directive (2002/95/EC). HZ Low Impedance HN Specifications ltem Category Temperature Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Performance Characteristics 25 ~ +105uC 6.3 ~ 16V 470 ~ 3300F 20% (120Hz, 20uC) After 2 minutes' application of rated voltage, leakage current is less than 0.03CV For capacitance of more than 1000F, add 0.02 for every increase of 1000F Rated voltage (V) 6.3 10 120Hz 20uC 16 tan d 0.22 0.19 tan d (MAX.) 0.16 16 6.3 10 Rated voltage (V) 120Hz Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) ZN25uC / Z+20uC 3 3 3 After an application of D.C. bias voltage plus the rated ripple current for 2000 hours at 105uC the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed below. Endurance Capacitance change Within 30% of initial value tan d 200% or less of initial specified value Leakage current lnitial specified value or less Marking Printed with gold color on black sleeve. Radial Lead Type Type numbering system (Example : 6.3V 1800F) 1 2 3 4 5 6 7 8 9 10 11 12 UHZ 0 J 1 8 2 MPM fd Size code Configuration Capacitance tolerance (20%) Rated capacitance (1800F) Rated voltage (6.3V) Series name Type P 0.5 fD+0.5 MAX. Sleeve (P.E.T.) L+1.5MAX. 15MIN 4MIN Pressure relief vent fD P fd 8 3.5 0.6 (mm) 10 5 0.6 Configuration Pb-free leadwire fD Pb-free PET sleeve 8 x 10 PM Standard ratings V (Code) Case size Cod Item fD L e Cap. (F) (mm) 470 471 680 681 820 821 1000 102 1200 122 1500 152 1800 182 2200 2700 3300 222 272 332 8 15 10 12.5 8 15 10 12.5 8 20 10 16 10 16 8 20 10 16 10 20 10 20 10 25 6.3 (0J) Impedance Rated ripple (m1/2) MAX. (mArms) 20uC / 100kHz 105uC / 100kHz 14 12 14 12 9 10 10 9 10 7 7 6.5 2210 2280 2210 2280 2880 2960 2960 2880 2960 3770 3770 4690 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Case size fD L (mm) 10 (1A) Impedance Rated ripple (m1/2) MAX. (mArms) 20uC / 100kHz 105uC / 100kHz 10 12.5 12 2288 10 12.5 10 12.5 10 16 8 20 10 16 10 16 8 20 12 12 10 9 10 10 9 2280 2280 2960 2880 2960 2960 2880 10 20 7 3770 10 25 6.5 4140 16 (1C) Impedance Case size Rated ripple (m1/2) MAX. fD L (mArms) 20uC / 100kHz 105uC / 100kHz (mm) 10 12.5 12 2280 10 12.5 12 2280 8 20 9 2880 10 16 10 2960 10 16 10 2960 10 16 10 2960 8 20 9 2880 10 20 7 3770 10 20 7 3770 10 20 7 3770 10 25 6.5 4140 : In this case, n will be put at 12th digit of type numbering system. : In this case, c will be put at 12th digit of type numbering system. : In this case, . will be put at 12th digit of type numbering system. CAT.8100V