M55342K06B5D60CWB - Vishay Presicion Group

www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31010

140 Revision: 18-Mar-10

RCWPM (Military M/D55342)

Vishay Dale

Thick Film Chip Resistors, Military/Established Reliability

MIL-PRF-55342 Qualified, Type RM

FEATURES

•Fully conforms to the requirements of MIL-PRF-55342

•Established reliability - verified failure rate; M, P, R, S and

T levels

•Operating temperature range is - 55 °C to + 150 °C

•100 % group A screening per MIL-PRF-55342

•Termination style B - tin/lead wraparound over nickel

barrier

•For MIL-PRF-32159 zero ohm jumpers, see Vishay Dale’s

RCWPM Jumper (Military M32159) datasheet

•Halogen-free according to IEC 61249-2-21 definition

Notes

• DSCC has created a series of drawings to support the need for 0201-sized product. Vishay Dale is listed as a resource on this drawing as

follows:

This drawing can be viewed at: www.dscc.dla.mil/Programs/MilSpec/listDwgs.asp?DocType=DSCCdwg

(1) Continuous working voltage shall be or maximum working voltage, whichever is less

(2) Characteristics: K = ± 100 ppm/°C; M = ± 300 ppm/°C

MECHANICAL SPECIFICATIONS

Resistive Element Ruthenium oxide

Encapsulation Epoxy

Substrate 96 % alumina

Termination Solder-coated nickel barrier

Solder Finish Tin/lead solder alloy

STANDARD ELECTRICAL SPECIFICATIONS

VISHAY DALE

MODEL

MIL-PRF-55342

STYLE

MIL SPEC.

SHEET TERM.

POWER

RATING

P70 °C W

MAX.

WORKING

VOLTAGE (1)

TEMPERATURE

COEFFICIENT (2)

± ppm/°C

TOLERANCE

± %

RESISTANCE

RANGE Ω

RCWPM-0502 RM0502 01 B 0.05 40 300

100, 300

2, 5, 10

1, 2, 5, 10

1 to 9.1

10 to 22M

RCWPM-550 RM0505 02 B 0.125 40 300

100, 300

2, 5, 10

1, 2, 5, 10

1 to 9.1

10 to 22M

RCWPM-5100 RM1005 03 B 0.20 75 300

100, 300

2, 5, 10

1, 2, 5, 10

1 to 5.1

5.6 to 22M

RCWPM-5150 RM1505 04 B 0.15 125 300

100, 300

2, 5, 10

1, 2, 5, 10

1 to 5.1

5.6 to 22M

RCWPM-7225 RM2208 05 B 0.225 175 300

100, 300

2, 5, 10

1, 2, 5, 10

1 to 5.1

5.6 to 22M

RCWPM-575 RM0705 06 B 0.15 50 300

100, 300

2, 5, 10

1, 2, 5, 10

1 to 5.1

5.6 to 22M

RCWPM-1206 RM1206 07 B 0.25 100 300

100, 300

2, 5, 10

1, 2, 5, 10

1 to 5.1

5.6 to 22M

RCWPM-2010 RM2010 08 B 0.80 150 300

100, 300

2, 5, 10

1, 2, 5, 10

1 to 5.1

5.6 to 22M

RCWPM-2512 RM2512 09 B 1.0 200 300

100, 300

2, 5, 10

1, 2, 5, 10

1 to 5.1

5.6 to 22M

RCWPM-1100 RM1010 10 B 0.50 75 300

100, 300

2, 5, 10

1, 2, 5, 10

1 to 5.1

5.6 to 22M

RCWPM-0402 RM0402 11 B 0.05 30 300

100, 300

2, 5, 10

1, 2, 5, 10

1 to 9.1

10 to 22M

RCWPM-0603 RM0603 12 B 0.10 50 300

100, 300

2, 5, 10

1, 2, 5, 10

1 to 5.1

5.6 to 22M

RCWPM-0302 RM0302 13 B 0.04 15 300

100, 300

2, 5, 10

1, 2, 5, 10

1 to 9.1

10 to 22M

DSCC DRAWING

NUMBER

VISHAY DALE

MODEL TERM.

POWER RATING

P70 °C W

RES. RANGE

ΩRES. TOL.

± %

TEMP. COEF.

± ppm/°C

MAX. WORKING

VOLTAGE (1)

07009 RCWP-0201 B 0.05 47 to 1M

10 to 1M ± 1; ± 5 100

200 30

P x R

Document Number: 31010 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com

Revision: 18-Mar-10 141

RCWPM (Military M/D55342)

Thick Film Chip Resistors, Military/Established Reliability

MIL-PRF-55342 Qualified, Type RM Vishay Dale

Note

(1) Products with space level failure rates are only offered in packaging codes with ESD overpack and labeling. For all other failure rates, the ESD

pack codes are an optional type of packaging.

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: M55342M02B10E0RWB (preferred part number format)

MIL

STYLE CHARACTERISTICS SPEC.

SHEET TERMINATION

STYLE VALUE AND

TOLERANCE FAILURE

RATE PACK AG I NG

(1)

SPECIAL

D55342

applies to

Style 07

(RM1206)

only.

M55342

applies to

all other

styles.

= 100 ppm

= 300 ppm

(see Standard

Electrical

Specifications

table)

= Pre-tinned

nickel barrier,

wraparound

(see Tolerance

and Multipliers

table)

= Non-ER

= 1.0 %/1000 h

= 0.1 %/1000 h

= 0.01 %/1000 h

= 0.001 %/1000 h

= Space level

= Tin/lead,

T/R (full)

= Tin/lead,

T/R (full), w/ESD

= Tin/lead, T/R

single lot date code

= Tin/lead,

T/R (1000 pieces)

= Tin/lead, T/R

(1000 pieces), w/ESD

= Tin/lead, tray

= Tin/lead, tray,

w/ESD

= Tin/lead, tray,

single lot date code

= Tin/lead,

T/R (500 pieces)

= Tin/lead, T/R

(500 pieces), w/ESD

= Tin/lead,

T/R (300 pieces)

= Tin/lead, T/R

(300 pieces), w/ESD

Blank = Standard

(Dash Number)

(Up to 1 digits)

= Space

level (-98)

Historical Part Numbering: M55342M02B10E0R (will continue to be accepted)

M55342 M 02 B 10E0 R WB

MIL

STYLE CHARACTERISTICS SPEC. SHEET TERMINATION

STYLE

VALUE AND

TOLERANCE

FAILURE

RATE

PAC K AG I N G

CODE

RESISTANCE TOLERANCE AND MULTIPLIERS

TOLERANCE

MULTIPLIER VALUE

RANGE (Ω)

± 1 % ± 2 % ± 5 % ± 10 %

D G J M 1 1 to 9xx

E H K N 1000 1K to 9xxK

F T L P 1 000 000 1M to 22M

Examples: 11D3 = 11.3 Ω ± 1 %

10E0 = 10 kΩ ± 1 %

332D = 332 Ω ± 1 %

2F21 = 2.21 MΩ ± 1 %

51G0 = 51 Ω ± 2 %

10H0 = 10 kΩ ± 2 %

33H0 = 33 kΩ ± 2 %

22T0 = 22 MΩ ± 2 %

15J0 = 15 Ω ± 5 %

10K0 = 10 kΩ ± 5 %

560K = 560 kΩ ± 5 %

8L20 = 8.2 MΩ ± 5 %

10M0 = 10 Ω ± 10 %

10N0 = 10 kΩ ± 10 %

2P70 = 2.7 MΩ ± 10 %

8P20 = 8.2 MΩ ± 10 %

55342M02MB10E0R W B

www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31010

142 Revision: 18-Mar-10

RCWPM (Military M/D55342)

Vishay Dale Thick Film Chip Resistors, Military/Established Reliability

MIL-PRF-55342 Qualified, Type RM

DIMENSIONS in inches (millimeters)

VISHAY

DALE

MODEL

MIL-PRF-55342

STYLE

MIL

SPEC.

SHEET

(LENGTH)

(WIDTH)

(HEIGHT)

(TOP TERM)

(BOTTOM TERM)

RCWPM-0502 RM0502 01 0.055 ± 0.005

(1.40 ± 0.13)

0.023 ± 0.003

(0.58 ± 0.08)

0.015 ± 0.003

(0.38 ± 0.08)

0.010 ± 0.005

(0.25 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-550 RM0505 02 0.055 ± 0.005

(1.40 ± 0.13)

0.050 ± 0.005

(1.27 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.010 ± 0.005

(0.25 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-5100 RM1005 03 0.105 ± 0.005

(2.67 ± 0.13)

0.050 ± 0.005

(1.27 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-5150 RM1505 04 0.155 ± 0.005

(3.94 ± 0.13)

0.050 ± 0.005

(1.27 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-7225 RM2208 05 0.230 ± 0.005

(5.84 ± 0.13)

0.075 ± 0.005

(1.91 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

RCWPM-575 RM0705 06 0.080 ± 0.005

(2.03 ± 0.13)

0.050 ± 0.005

(1.27 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.016 ± 0.008

(0.41 ± 0.20)

0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-1206 RM1206 07 0.125 ± 0.005

(3.18 ± 0.13)

0.063 ± 0.005

(1.60 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-2010 RM2010 08 0.197 ± 0.006

(5.00 ± 0.15)

0.098 ± 0.005

(2.49 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

RCWPM-2512 RM2512 09 0.250 ± 0.006

(6.35 ± 0.15)

0.124 ± 0.005

(3.15 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

RCWPM-1100 RM1010 10 0.105 ± 0.005

(2.67 ± 0.13)

0.100 ± 0.005

(2.54 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-0402 RM0402 11 0.039 ± 0.003

(0.99 ± 0.08)

0.020 ± 0.003

(0.51 ± 0.08)

0.013 ± 0.003

(0.33 ± 0.08)

0.010 ± 0.005

(0.25 ± 0.13)

0.010 ± 0.005

(0.25 ± 0.13)

RCWPM-0603 RM0603 12 0.063 ± 0.005

(1.60 ± 0.13)

0.032 ± 0.005

(0.81 ± 0.13)

0.018 ± 0.005

(0.46 ± 0.13)

0.012 ± 0.005

(0.30 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-0302 RM0302 13 0.034 ± 0.004

(0.86 ± 0.10)

0.021 ± 0.003

(0.53 ± 0.08)

0.013 ± 0.003

(0.33 ± 0.08)

0.007 ± 0.005

(0.18 ± 0.13)

0.008 ± 0.005

(0.20 ± 0.13)

RCWP-0201 0.024 ± 0.002

(0.61 ± 0.05)

0.012 ± 0.002

(0.30 ± 0.05)

0.009 ± 0.002

(0.23 ± 0.05)

0.006 ± 0.003

(0.15 ± 0.08)

0.006 + 0.002 - 0.004

(0.15 + 0.05 - 0.10)

DERATING CURVE

Derating

- 55 - 25 75 100 125 150 175

120

100

Ambient Temperature in °C

Rated Power in %

05025

CAGE CODE: 91637 and SH903

Document Number: 91000 www.vishay.com

Revision: 18-Jul-08 1

Disclaimer

Legal Disclaimer Notice

Vishay

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein

or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any

information provided herein to the maximum extent permitted by law. The product specifications do not expand or

otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed

therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this

document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless

otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such

applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting

from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding

products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.