A Product Line of Diodes Incorporated Green ZX5T953G 100V PNP MEDIUM POWER TRANSISTOR IN SOT223 Features * * * * * * * * * * Mechanical Data BVCEO > -100V IC = -5A High Continuous Collector Current ICM = -10A Peak Pulse Current Low Saturation Voltage VCE(sat) < -90mV @ -1A RSAT = 60m for a Low equivalent On-Resistance hFE Specified up to -10A for a High Gain Hold-Up Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. "Green" Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability PPAP Capable (Note 4) * * * * * Case: SOT223 Case Material: Molded Plastic. "Green" Molding Compound; UL Flammability Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.112 grams (Approximate) Applications * * * * SOT223 Motor Driving Line Switching High Side Switches Subscriber Line Interface Cards (SLIC) C B E Top View Device Symbol Top View Pin-Out Ordering Information (Notes 4 & 5) Product ZX5T953GTA ZX5T953GQTA Notes: Compliance AEC-Q101 Automotive Marking X5T953 X5T953 Reel size (inches) 7 7 Tape width (mm) 12 12 Quantity per reel 1,000 1,000 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally the same, except where specified. 5. For packaging details, go to our website at http:// www.diodes.com/products/packages.html. Marking Information SOT223 X5T 953 ZX5T953G Datasheet Number: DS33425 Rev. 5 - 2 W W Y X5T953 = Product Type Marking Code YWW = Date Code Marking Y or Y = Last Digit of Year (ex: 5= 2015) WW or WW = Week Code (01~53) 1 of 7 www.diodes.com March 2015 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZX5T953G Maximum Ratings (@TA = +25C, unless otherwise specified.) Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Symbol VCBO VCEO VEBO IC ICM Value -140 -100 -7 -5 -10 Unit V V V A A Value 3.0 24 1.6 12.8 42 78 10.4 -55 to +150 Unit Thermal Characteristics (@TA = +25C, unless otherwise specified.) Characteristic Symbol (Note 6) Power Dissipation Linear Derating Factor PD (Note 7) Thermal Resistance, Junction to Ambient Thermal Resistance Junction to Lead Operating and Storage Temperature Range (Note 6) (Note 7) (Note 8) RJA RJA RJL TJ, TSTG W mW /C C/W C ESD Ratings (Note 9) Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model Characteristic ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 6. For a device mounted with the collector lead on 52mm x 52mm 2oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured under still air conditions whilst operating in a steady-state. 7. Same as Note 5, except the device is mounted on 25mm x 25mm 1oz copper. 8. Thermal resistance from junction to solder-point (at the end of the collector lead). 9. Refer to JEDEC specification JESD22-A114 and JESD22-A115. ZX5T953G Datasheet Number: DS33425 Rev. 5 - 2 2 of 7 www.diodes.com March 2015 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZX5T953G 10 VCE(sat) Limit 1 DC 1s 100ms 100m 10ms Single Pulse. T amb=25C 10m 100m 52mmX52mm FR4 2oz Cu 1ms 100s 1 10 100 -VCE Collector-Emitter Voltage (V) Max Power Dissipation (W) -IC Collector Current (A) Thermal Characteristics and Derating Information 3.0 2.5 52mmX52mm FR4 2oz Cu 2.0 1.5 1.0 0.5 25mmX25mm FR4 1oz Cu 0.0 0 20 30 D=0.5 20 Single Pulse D=0.05 D=0.1 1m 10m 100m 1 10 100 Pulse Width (s) 1k Max Power Dissipation (W) Thermal Resistance (C/W) 2oz Cu 0 100 Datasheet Number: DS33425 Rev. 5 - 2 100 120 140 160 Single Pulse. T amb=25C 52mmX52mm FR4 2oz Cu 100 Transient Thermal Impedance ZX5T953G 80 Derating Curve 40 52mmX52mm FR4 10 60 Temperature (C) Safe Operating Area D=0.2 40 3 of 7 www.diodes.com 10 1 100 1m 10m 100m 1 10 100 1k Pulse Width (s) Pulse Power Dissipation March 2015 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZX5T953G Electrical Characteristics (@TA = +25C, unless otherwise specified.) Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 10) Emitter-Base Breakdown Voltage Collector-Base Cut-Off Current Collector-Emitter Cut-Off Current Emitter Cut-Off Current Symbol BVCBO BVCER BVCEO BVEBO Min -140 -140 -100 -7 ICBO - ICER R 1k IEBO - Typ -160 -160 -115 -8.1 <1 - Max -20 -0.5 Unit V V V V <1 <1 250 200 50 30 5 -20 -70 -120 -240 -985 -920 42 -20 -0.5 -10 300 -30 -90 -150 -340 -1100 -1050 - nA A nA nA A Collector-Emitter Saturation Voltage (Note 10) VCE(sat) Base-Emitter Saturation Voltage (Note 10) Base-Emitter Turn-On Voltage (Note 10) Output Capacitance (Note 10) VBE(sat) VBE(on) Cobo 100 100 25 15 - Transition Frequency fT - 125 - MHz Switching Time ton toff - 42 540 - ns Static Forward Current Transfer Ratio (Note 10) Note: hFE - mV mV mV pF Test Condition IC = -100A IC = -1A, RB 1k IC = -1mA IE = -100A VCB = -100V VCB = -100V, TA = +100C VCB = -100V VCB = -100V, TA = +100C VEB = -6V IC = -10mA, VCE = -1V IC = -1A, VCE = -1V IC = -3A, VCE = -1V IC = -4A, VCE = -1V IC = -10A, VCE = -1V IC = -100mA, IB = -10mA IC = -1A, IB = -100mA IC = -2A, IB = -200mA IC = -4A, IB = -400mA IC = -4A, IB = -400mV IC = -4A, VCE = -2V VCB = -10V. f = 1MHz VCE = -10V, IC = -100mA f = 50MHz VCC = -10V, IC = -1A IB1 = IB2 = -100mA 10. Measured under pulsed conditions. Pulse width 300s. Duty cycle 2%. ZX5T953G Datasheet Number: DS33425 Rev. 5 - 2 4 of 7 www.diodes.com March 2015 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZX5T953G Typical Electrical Characteristics (@TA = +25C, unless otherwise specified.) 1 0.6 IC/IB=50 0.5 IC/IB=20 0.4 - VCE(SAT) (V) - VCE(SAT) (V) Tamb=25C 100m IC/IB=10 0.3 100C 0.2 25C 0.1 IC/IB=10 10m 1m 10m 100m 1 - IC Collector Current (A) -55C 0.0 1m 10 10m 100m 1 10 1 10 - IC Collector Current (A) VCE(SAT) v IC VCE(SAT) v IC 250 1.4 200 1.0 0.8 150 25C 0.6 100 0.4 -55C 50 0.2 0.0 1m 10m 100m 1 - IC Collector Current (A) 0 10 - VBE(SAT) (V) 1.2 Typical Gain (hFE) 100C Normalised Gain 1.2 IC/IB=10 VCE=2V 1.0 0.8 -55C 25C 0.6 100C 0.4 1m hFE v IC 10m 100m - IC Collector Current (A) VBE(SAT) v IC 1.4 - VBE(ON) (V) 1.2 VCE=2V 1.0 -55C 25C 0.8 0.6 0.4 1m 100C 10m 100m 1 - IC Collector Current (A) 10 VBE(ON) v IC ZX5T953G Datasheet Number: DS33425 Rev. 5 - 2 5 of 7 www.diodes.com March 2015 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZX5T953G Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. D b1 Q C E Gauge Plane Seating Plane e1 0.25 L b 0 -1 0 e A A1 E1 SOT223 Dim Min Max Typ A 1.55 1.65 1.60 A1 0.010 0.15 0.05 b 0.60 0.80 0.70 b1 2.90 3.10 3.00 C 0.20 0.30 0.25 D 6.45 6.55 6.50 E 3.45 3.55 3.50 E1 6.90 7.10 7.00 e 4.60 e1 2.30 L 0.85 1.05 0.95 Q 0.84 0.94 0.89 All Dimensions in mm 7 7 Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. X1 Y1 C1 Y2 Dimensions Value (in mm) C 2.30 C1 6.40 X 1.20 X1 3.30 Y 1.60 Y1 1.60 Y2 8.00 Y X Note: C For high voltage applications, the appropriate industry sector guidelines should be considered with regards to creepage and clearance distances between device terminals and PCB tracking. ZX5T953G Datasheet Number: DS33425 Rev. 5 - 2 6 of 7 www.diodes.com March 2015 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZX5T953G IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2015, Diodes Incorporated www.diodes.com ZX5T953G Datasheet Number: DS33425 Rev. 5 - 2 7 of 7 www.diodes.com March 2015 (c) Diodes Incorporated