REV. | AF] |No. OF POS. x .07874 + (,0938) REF | [NO. OF POS. x 2.0000 + [2.38] REF] DIMENSIONS ARE IN INCHES NO. OF POS x .07874 + (.0238) REF +] [NO. OF POS. x 2.0000 +"[.60] REF] ONE PLC DECIMALS + .1 [2.5] TWO PLC DECIMALS +.01 [.25] Pane meaa sent, [eve | LIM ASSEMBLY /IMPIFIICD A 07874 REF | = [ [2.0000 REF] -020 REF a [51 REF] ( tle 04 ce J 1 8 8 a|@ # a @ | 07874. REF _ __ _ @ 1774 REF, 2374 REF. [2.0000 REF] | * [4.506 REF] [6.030 REF] T HE 8 BA a a & 8 Lt} 1 oi] = 03 q " | -| |- NO. OF POS. x .07874 (.07874) REF [NO. OF POS. x 2.0000 [2.0000] REF] 140 REF| - [3.55 REF] CONTACT AREA ONLY FOR FIRST POSITION POS. -05 INDICATOR THRU 25 THROUGH HOLE | | FIG. 1 \ PIN #1 2 MAX TOE IN EITHER DIRECTION | yo FAL 20 SQ. REF p30 SQ REF] Tr? MAX SWAY IN EITHER DIRECTION 1 + (NO. OF POS x .07874 + (.0598)) +.003 * (NO. OF POS x 2.0000+ (1.519))+.08] LTMM=108XX=XX-D-LC SHOWN t DiS )___t 125 REF wae 190 REF [5.17 REF] a [4.83 REF] { | Yr | .015 REF BY it a] [.38 REF] t - .010 REF Lc05-T [.25 REF] jt 2 MAX SWAY IN 7 . EITHER DIRECTION EGHER DIRECTION L SECT. "AA 01; -02: -G -T -&: -L: F: H: -100[ 2.54] POST HEIGHT (STANDARD) 120[3.05, LTMM1XXXXXXDXXXX J Lh 02 THRU 25 POST HEIGHT SEE TABLE 1) GOLD (USE T1S13-Xx-G-2) TIN (USE T1S13XX-T2) SELECTIVE (USE T1S13-XX-S2) UGHT SELECTIVE (USE T1813XX-L2) FLASH GOLD SELECTIVE (USE T-1S13XX-F2) HEAVY GOLD (USE T-1813XX-H-2) SM: HEAVY GOLD SELECTIVE, MATTE TIN TAIL (USE T-1S13XXS2) -D: TW: MATTE TIN (USE _T-1$13-XX-T-2) LM: LIGHT GOLD SELECTIVE, MATTE TIN TAIL (USE _T1813XX-L-2) FM: FLASH GOLD SELECTIVE, MATTE TIN TAIL USE _T1S13XXF2) XX INDICATES POS. TO BE OMMITTED RA: RIGHT ANGLE (SEE FIG 2 RA & TABLE 1) SM: SURFACE MOUNT (SEE FIG 3 -SM & TABLE 1) -Le: LOCKING CLIP 'USE LC-O5TM FOR THROUGH HOLE STYLE, SEE FIG 1) USE LC-O07TM FOR SM STYLE, SEE FIG 3 NOT AVAILABLE FOR RA STYLE LEAVE BLANK FOR THROUGH HOLE (SEE FIG. 1 & TABLE 1 =P: PICK & PLACE PAD (USE PPP24, SEF FIG. 4) <M: METAL PICK AND PLACE PAD (USE MPP11, (SM OPTION ONLY) -K: POLYAMIDE FILM (SEE FIG. 6, SHT. 2) (-SM OPTION ONLY) =TR: TAPE AND REEL (SEE FIG. 7, SHT. 3) FOR SMT ONLY 'SM OPTION ONLY) FIG. 5 SHT.2) DOUBLE (USE LTMMXXD-LC) PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY. TO SAMTED ING. AND SHALL NOT .07874_ REF [2.0 REF] 2 MAX SWAY IN EITHER DIRECTION fot 10 | RA: RIGHT ANGLE FIG. 2 DIFFERENT AS SHOWN OTHERWISE SAME AS FIG. 1 .090 [2.29] REF CONTACT AREA y 90+2 52 .0787+.005 fz.02.13] > PIN #1 PIN #2 SECT. "BB LEAD STYLE "A" |"B REF|"C REF PIN #1 PIN #2 100 .090 THROUGH o1 [2.54] | [2.3] N/A T-181304X2 N/A SEE TG. 1 -02 120.) 117 T-1813-07-X-2 ( . 1) [3.05] | [3.0] N/A 1S13-07-X N/A RIGHT -01 [25] (594 99] T-151305-X2 | T-1S13-06Xx2 ANGLE 120 228 386 (SEE FIG. 2)) 92 (30) | (58) | fas] | T-1813-19-x-2 | T-1813-22-x-2 100 172 SURFACE -01 (2.54) | 4.4] N/A T-1813-07-X-2 N/A MOUNT 120 173 (SEE FIG. 3) -02 [3.08] | [4.4] N/A T-1$13-20-x-2 N/A T=1S13XXX2 14 | .614[15.6 mm [Sf | _LENGTH =15 | _.714|18.1_mm = 02 377 25mm 16 [1.110 [28.2 mm IN-PROCESS = : 6 mm 17 [_ .693 [17.6 mm a 04] .255| 6.5 mm 18 | .651 [21.6 mm 05|_.3597|10.7_mm 19 [_.413[10.5 mm | 06| .555/14.1 mm 20| .323| 82 mm "A" -07| 3502| 7.7 mm =21 | .3235[ 8.2 mm =08 | 476 [72.7 mm 99 | 571114.5 mm T 09 | .594|15.1_mm Ss Tes LL =10 |_.673|17.1_mm : oomm Ty 111| .751119.1 mm 24 | .928 |23.6 mm le =12 |_.830|21.1_mm 25 | .643 [16.3 mm B 13 | .456|11.6 mm "cr NOTES: 1. MAX PIN ROTATION IN BODY TO BE 2. PIN 2. PUSHOUT FORCE TO BE 1 Ib. MIN. PIN #2 3. REPRESENTS CRITICAL DIMS. 4, DIMENSIONS IN [ ] ARE IN MILLIMETERS. 5. FOR LOCKING CLIPS: 12 OZ. MIN. RETENTION 6. MUST BE MEASURED AT BEND. INSULATOR: EXISPROD\ASSEMBLY\2MM DUPONT ZYTEL HTNFR52G30NH ~= LTMMASM re Samy ec TERMINAL: PHOSPHER BRONZE De 520 PARK EAST BLVD. NEW ALBANY, INDIANA 47150 PHONE (812) 944-6733 P.O. BOX 1147 CODE 55322 MADE BY: SHEET 1 OF 3UNLESS OTHERWISE NOTED TITLE: DWG NO: DIMENSIONS ARE IN INCHES TOLERANCES ARE: ONE PLACE DECIMALS +.1[2.5] THREE PLACE DECIMALS +.005[.13] ANGLES LTMM ASSEMBLY {IWATA Y-D-YY-4Y TWO PLACE DECIMALS +.01[.25] FOUR PLACE DECIMALS + .0010[.051] | + SHEET 20F 3 02 04 mA A A AA 6 BH @ B B I a B B FIG. is) = ee ole a a || K OPTION (POLYAMIDE FILM) I = FOR SURFACE MOUNT OPTIONS ONLY v VY VI Gy a o1 03 *c Re | I. MAX SWAY IN EITHER DIRECTION (SEE NOTE) PIN #1 3 | | (SEE NOTE) | I CONTACT AREA LF 019.010 [484.25] 015 pra A | 035 ] fe [0.38] a 7 oT J [0.89] | REF a @ REF ne Rh At as Bo a a Ha oso ner gag )) | OIL [ras] (SEE NOTE 6) vw? vV rad uf iia AT" 1S #.2953+.0050 [#7.500+.127] + L 1143 REF Lo oer gre cone, \e-or-m | i) -056 REF [1.4 REF] SM: SURFACE MOUNT |- _.3074_ REF NOTE: R" = USED MEASURED DIMENSION (ner) FIG. 3 [7.808] g* = {CR"-.2953 [7.500] /2} +.020 [0.51] SECT. C-C DIFFERENT AS SHOWN OTHERWISE SAME AS FIG. 1 LTMM108XXXXDSMLC SHOWN NOTE: z = USED MEASURED DIMENSION (REF) "R" = {CR'-.325 [8.26)) /2} +.020 [.51] NOTE: R = USED MEASURED DIMENSION (REF) "gs" = {(R"-.250 [6.35] /2} 4.020 [0.51] Ss" -| 7! IN PROCESS 1 IN PROCESS 2 -325_REF. -| _.237_REF. [8.26] O50 REF. [6.02] -250 [1.27] l [6.35] .345 [8.76] REF \" # | PIN #1 7 MPP=11 A | 240 oN [6.10] "a" .035 [.89] 7 | .275 [6.99] J . JJ |] ea P: PICK AND PLACE PAD FIG. 4 DIFFERENT AS SHOWN OTHERWISE SAME AS FIG. 1 LIMM108XXXXDSMLC SHOWN FOR SURFACE MOUNT OPTIONS ONLY PROPRIETARY NOTE THIS DOCUMENT CONTAINS: INFORMATION CONTDENTIAL AND PRROFR EXPRESSED SENT OF SAMTEC INC. M: METAL PICK AND PLACE PAD DIFFERENT AS SHOWN OTHERWISE SAME AS FIG. 1 LIMM108XXXXDSMLC SHOWN SM OPTION ONLY Samlec SE 520 PARK EAST BLVD. NEW ALBANY, INDIANA 47150 PHONE (812) 944-6733 P.O. BOX 1147 CODE 553522 EXxISPROD\ASSEMBLY\2MM LTMM. oan MADE BY:BRATCHER 2-11-94 LIMM~1XX-XX-XX-D-XX-XX SHEET 2 OF 3REV. | AG | PACKAGING SamlBc ANTI-STATIC Saml@c ANTI-STATIC | ag Saml@c ANTI- STATIC | PUDUUTY WWE Saml@c anti-static PT1240238 a PT12403-38 a PT12403-38 PT-12401-45 5 o Ta = 5 Sam{Ec ANTI-STaTic eee Vv smier-smne [eee -_ __t Saml@c anti-static a PT12403-38 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY. TO ING. AND SHALL NOT BE UNLESS OTHERWISE NOTED DIMENSIONS ARE IN INCHES TOLERANCES ARE: TITLE: ONE PLACE DECIMALS +.1[ 2.5] THREE PLACE DECIMALS +.005[.13] LIMM ASSEMBLY DWG NO: LIN-AX TWO PLACE DECIMALS +.01[.25]FOUR PLACE DECIMALS + .0010[.051] SHEET 30F 3 POLARIZATION NOTCH POSITION 01 L POSITION 01 .876 [22.25] aoe LOOSE END OF REEL 1.732 [44] UNWINDING DIRECTION - ooo0oo0o00000000 0000 ! a PT12406-29 UNWINDING DIRECTION ey ye UNWINDING DIRECTION "?#- PARTS TO COME OFF REEL AS SHOWN WITH POCKETS FACING UP TAPE & REEL FIG. 7 SCALE: .3575x PT1-2401-45 REEL TABLE 2 OPTIONS PACKAGING TUBE PLUG -, -LC PT124-02-38 | TP-03 -P, -LC-P PT-1-24-03-38 | TP-03 SM PT-1-24-03-38 | TP-03 SM-P PT124-03-38 | TP09 SM-LC-P PT-1-24-06-29 | TP-07 -RA PT-1-24-01-45 | TP-03 RA-P PT-1-24-01-45 | TP-03 samjec SE 520 PARK EAST BLVD. NEW ALBANY, INDIANA 47150 PHONE (812) 944-6733 P.O. BOX 1147 CODE 553522 EXxISPROD\ASSEMBLY\2MM LTMMASM3 MADE BY:BRATCHER 2-11-94 LIMM1XX-XX-XX-D-XX-XX SHEET 3 OF 3