LITE-ON SEMICONDUCTOR DF15005M thru DF1510M REVERSE VOLTAGE - 50 to 1000 Volts FORWARD CURRENT - 1.5 Amperes GLASS PASSIVATED BRIDGE RECTIFIERS FEATURES DF Rating to 1000V PRV Ideal for printed circuit board Low forward voltage drop, high current capability. Reliable low cost construction utilizing molded plastic technique results in inexpensive product The plastic material has UL flammability classification 94V-0 A D UL recognized file # E95060 DIM. A B J ~ ~ + - C D B C E F E MECHANICAL DATA H G I Polarity : As marked on Body Weight : 0.02 ounces, 0.38 grams Mounting position : Any G H I J F DF MIN. 8.20 6.20 7.60 MAX. 8.50 6.50 8.90 7.40 7.60 2.40 5.00 2.60 4.10 5.20 4.60 1.27 0.41 0.22 2.03 0.51 0.30 All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current VRRM VRMS VDC DF 15005M 50 35 50 DF 1501M 100 70 100 I(AV) DF 1502M 200 140 200 DF 1504M 400 280 400 DF 1506M 600 420 600 DF 1508M 800 560 800 DF 1510M 1000 700 1000 UNIT V V V 1.5 A IFSM 50 A Maximum forward Voltage at 1.5A DC VF 1.1 V Maximum DC Reverse Current at Rated DC Blocking Voltage IR 10 500 uA @TA=40 C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load @TJ =25 C @TJ =125 C I 2 t Rating for fusing (t < 8.3ms) I t 10.4 AS Typical Junction Capacitance per element (Note 1) CJ 25 pF R0JA 40 C/W TJ -55 to +150 C TSTG -55 to +150 Typical Thermal Resistance (Note 2) Operating Temperature Range Storage Temperature Range 2 NOTES : 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Thermal resistance from junction to ambient mounted on P.C.B with 0.5 x 0.5"(13x13mm) copper pads. 2 C REV. 6, Mar-2013, KBDC02 RATING AND CHARACTERISTIC CURVES DF1500M thru DF1510M PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG.1 - FORWARD CURRENT DERATING CURVE 1.50 1.25 1.00 0.75 0.50 0.25 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.00 20 40 60 80 100 120 140 FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 50 40 30 20 10 Single Half-Sine-Wave (JEDEC METHOD) 0 1 2 5 AMBIENT TEMPERATURE, () 50 100 FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.3 - TYPICAL JUNCTION CAPACITANCE 100 INSTANTANEOUS FORWARD CURRENT ,(A) 10 10 1.0 0.1 TJ = 25 C PULSE WIDTH 300us 2% DUTY CYCLE TJ = 25 C, f = 1MHz 1.0 .01 0.1 1.0 4.0 100 10.0 0 REVERSE VOLTAGE, (V) 0.2 0.4 0.6 FIG.5 - TYPICAL REVERSE CHARACTERISTICS TJ = 125 C 10 1.0 TJ = 25 C 0.1 0.01 0 20 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE , (V) 100 INSTANTANEOUS REVERSE CURRENT ,(uA) CAPACITANCE , (pF) 20 10 NUMBER OF CYCLES AT 60Hz 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 140 1.6 1.8 RATING AND CHARACTERISTIC CURVES DF1500M thru DF1510M FIG.6 - Admissible Repetitive Peak Forward Current vs. Pulse Duration IFRM(A) 100 V=0.1 10 V=0.2 V=0.3 V=0.5 1 0.000001 0.00001 0.0001 0.001 0.01 0.1 tp ,Pulse duration time(sec) V=0.5 V=0.3 V=0.2 V=0.1 1 Legal Disclaimer Notice DF1500M thru DF1510M Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.