DATA SHEET LOW OHMIC CHIP RESISTORS RL series 5%, 2%, 1% sizes 0402/0603/0805/1206/ 1210/1218/2010/2512 Product specification - Dec 11, 2008 V.4 RoHS compliant Product specification Chip Resistor Surface Mount RL 2 9 0402 to 2512 (RoHS Compliant) SERIES SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC This specification describes RL0402 to RL2512 low ohmic chip resistors with lead-free terminations made by thick film process. Both part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. YAGEO BRAND ordering code GLOBAL PART NUMBER (PREFERRED) APPLICATIONS Converters Printer equipment Server board Telecom Consumer FEATURES RoHS compliant - Products with lead free terminations meet RoHS requirements - Pb-glass contained in electrodes - Resistor element and glass are exempted by RoHS Reducing environmentally hazardous wastes High component and equipment reliability Saving of PCB space None forbidden-materials used in products/production Low resistances applied to current sensing Halogen Free Epoxy RL XXXX X X X XX XXXX L (1) (2) (3) (4) (5) (6) (7) (1) SIZE 0402 / 0603 / 0805 / 1206 / 1210 / 1218 / 2010 / 2512 (2) TOLERANCE F = 1% G = 2% J = 5% (3) PACKAGING TYPE R = Paper taping reel K = Embossed taping reel (4) TEMPERATURE COEFFICIENT OF RESISTANCE - = Base on spec (5) TAPING REEL 07 = 7 inch dia. Reel 10 = 10 inch dia. Reel 13 = 13 inch dia. Reel (6) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need to mention the last zero after R/K/M, e.g.1K2, not 1K20. Detailed resistance rules show in table of "Resistance rule of global part number". (7) OPTIONAL CODE L = optional symbol (Note) H = Halogen / Lead free (special code on request) Resistance rule of global part number Resistance code rule Example 0RXXX (1 to 976 m) 0R1 = 0.1 0R12 = 0.12 0R105 = 0.105 XRXX (1 to 9.76 ) 1R = 1 1R5 = 1.5 9R76 = 9.76 XXRX (10 to 97.6 ) 10R = 10 97R6 = 97.6 XXXR (100 to 976 ) 100R = 100 XKXX (1 to 9.76 K) 1K = 1,000 9K76 = 9760 XMXX (1 to 9.76 M) 1M = 1,000,000 9M76= 9,760,000 ORDERING EXAMPLE The ordering code of a RL0603 chip resistor, value 0.56 X with 1% tolerance, supplied in 7-inch tape reel is: RL0603FR-070R56 (L). NOTE 1. All our RSMD products meet RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER / 12NC can be added (both are on customer request) 3. Comply Halogen Free Epoxy www.yageo.com Dec 11, 2008 V.4 Product specification Chip Resistor Surface Mount RL SERIES 3 9 0402 to 2512 (RoHS Compliant) PHYCOMP BRAND ordering codes Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER (PREFERRED ) For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2. 12NC CODE 2350 / 2390 / 2322 (1) SIZE TYPE Last digit of 12NC XXX XXXXX L (2) (3) Resistance decade (3) (4) START TOL. RESISTANCE IN (1) (%) RANGE EMBOSSED (2) PAPER/PE (2) TAPE ON REEL TAPE ON REEL (units) 4,000 5,000 10,000 Last digit 0.01 to 0.0976 X 0 0.1 to 0.976 X 7 0402 LRC31 5% 0.05 to 1 1 to 9.76 X 2350 - - 513 20xxx 8 LRC32 1% 0.05 to 1 10 to 97.6 X 2350 - - 513 22xxx 9 0603 LRC21 2350 5% 0.01 to 1 100 to 976 X - 512 10xxx - 1 LRC22 2350 1% 0.01 to 1 1 to 9.76 kX - 512 12xxx - 2 0805 LRC11 5% 0.01 to 1 10 to 97.6 kX 2350 - 511 10xxx - 3 LRC12 1% 0.01 to 1 100 to 976 kX 2350 - 511 12xxx - 4 1206 LRC01 2350 5% 0.01 to 1 1 to 9.76 MX - 510 10xxx - 5 LRC02 2350 1% 0.01 to 1 10 to 97.6 MX - 510 12xxx - 6 5% 0.01 to 0.0976 - 735 90xxx - LPRC101 2390 5% 0.1 to 1 - 735 60xxx - LPRC102 2390 1% 0.01 to 1 - 735 3xxxx - 1218 LPRC201 2322 5% 0.01 to 1 735 64xxx - - 1210 LPRC101 2390 LPRC201 2322 1% 0.01 to 1 735 7xxxx - - 5% 0.01 to 0.0976 760 90xxx - - LPRC111 2322 5% 0.1 to 1 760 60xxx - - LPRC111 2322 1% 0.01 to 0.0976 761 90xxx - - LPRC111 2322 1% 0.1 to 1 2010 LPRC111 2322 761 6xxxx - - 5% 0.01 to 0.0976 762 90xxx - - LPRC221 2322 5% 0.1 to 1 762 60xxx - - LPRC221 2322 1% 0.01 to 0.0976 763 90xxx - - LPRC221 2322 1% 0.1 to 1 - - 2512 LPRC221 2322 763 6xxxx (1) The resistors have a 12-digit ordering code starting with 2350/2390/2322. (2) The subsequent 4 or 5 digits indicate the resistor tolerance and packaging. (In 12NC code, only 07'' tape reel code is supplied. Supply of 10''/13'' tape reel is requested in Global part number ordering code.) (3) The remaining 4 or 3 digits represent the resistance value with the last digit indicating the multiplier as shown in the table of "Last digit of 12NC". Example: 0.02 X = 0200 or 200 0.3 X = 3007 or 307 1X = 1008 or 108 33 kX = 3303 or 333 10 MX = 1006 or 106 ORDERING EXAMPLE The ordering code of a RL0603 chip resistor, value 0.56 X with 1% tolerance, supplied in tape of 5,000 units per reel is: 2350512125609(L) or RL0603FR-070R56(L). NOTE 1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER / 12NC can be added (both are on customer request) 3. Comply Halogen Free Epoxy (4) "L" is optional symbol (Note). "H" is Halogen / Lead free (special code on request). www.yageo.com Dec 11, 2008 V.4 Product specification Chip Resistor Surface Mount RL 4 9 0402 to 2512 (RoHS Compliant) SERIES MARKING RL0805 / RL1206 / RL1210 /RL1218 / RL2010 / RL2512 E-24 series / Non-series (R= 25/40/50/60/250/400/500 m): 4 digits 020 YNSC005 Fig. 1 Value = 20 m The "R" is used as a decimal point; the other 3 digits are significant. RL0603: R100 mX IN E-24 SERIES, R = 10/20/30/40/50/60 m 3 digits YNSC006 Fig. 2 Value = 22 m The "R" is used as a decimal point; the other 2 digits are significant. RL0402 / RL0603: R<100 mX EXCEPT 10/20/30/40/50/60 m ynsc007 No marking Fig. 3 For further marking information, please see special data sheet "Chip resistors marking". CONSTRUCTION The resistors are constructed out of a high-grade ceramic body. Internal metal electrodes are added at each end and connected by a resistive paste. The composition of the paste is adjusted to give the approximate required resistance and laser cutting of this resistive layer that achieves tolerance trims the value. The resistive layer is covered with a protective coat and printed with the resistance value. Finally, the two external terminations (matte tin) are added. See fig. 4. OUTLINES For dimension see Table 1 marking layer protective coat resistive layer inner electrode H termination (Ni / matte tin) ceramic substrate I2 DIMENSIONS I1 Table 1 For outlines see fig. 4 TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm) RL0402 1.00 0.10 0.50 0.05 0.35 0.05 0.20 0.10 0.25 0.10 W RL0603 1.60 0.10 0.80 0.10 0.45 0.10 0.25 0.15 0.25 0.15 RL0805 2.00 0.10 1.25 0.10 0.50 0.10 0.35 0.20 0.35 0.20 YNSC064 L RL1206 3.10 0.10 1.60 0.10 0.55 0.10 0.45 0.20 0.40 0.20 RL1210 3.10 0.10 2.60 0.15 0.55 0.10 0.50 0.20 0.50 0.20 Fig. 4 Chip resistor outlines RL1218 3.05 0.15 4.60 0.20 0.55 0.10 0.45 0.25 0.50 0.25 RL2010 5.00 0.10 2.50 0.15 0.55 0.10 0.60 0.20 0.50 0.20 RL2512 6.35 0.10 3.20 0.15 0.55 0.10 0.60 0.20 0.50 0.20 www.yageo.com Dec 11, 2008 V.4 Product specification Chip Resistor Surface Mount RL 5 9 0402 to 2512 (RoHS Compliant) SERIES ELECTRICAL CHARACTERISTICS Table 2 TYPE / RESISTANCE RANGE TEMPERATURE COEFFICIENT OF RESISTANCE 50mXR<1X RL0402 50mR<1 800 ppm/C RL0603 10mR<1 10mXR36mX 36mX