Magnetic Sensors Line Guide You know us as a leader, whether you've known us as MICRO SWITCHTM or Honeywell Sensing and and Productivity Solutions (S&PS). In 1968, we revolutionized the industry with the first solidstate keyboard combining Hall-effect sensing and associated electronics in a single circuit. Today, the Honeywell S&PS family of magnetic position sensors includes digital and analog Hall-effect position, magnetoresistive digital, Hall-effect vane, gear-tooth, and Hall-effect basic switches and magnets. These high-speed, extended life sensors are often directly compatible with other electronic circuits, responding to the presence or the interruption of a magnetic field by producing a proportional output. Gear-tooth and other packaged Hall-effect speed and direction sensors sense movements of a ferrous metal target. Digital and analog "sensor-only" devices are operated by a permanent magnet or electromagnet, while actuation mode depends on the type of magnets used. A vane passing through a gap or a magnet mounted on a plastic plunger operates integral magnet position sensors. FEATURES LOW POWER HALL-EFFECT SENSOR ICS - DIGITAL SL353 Series. Features: Energy efficient * Push-pull output * Non-chopper stabilized design * Omnipolar magnetics * Thermally balanced integrated circuit * Subminiature package size * Simple activation from a North pole or a South pole * Tape and reel packaging Benefits: Supply voltage as low as 2.2 Vdc, combined with very low average current of 1.8 A typ., reduces power consumption, provides extended battery life, and promotes energy efficiency. Push-pull output does not require external pull-up resistor, simplifying interface with common electrical circuits and potentially reducing PC board space and costs to the customer. Does not utilize chopper stabilization, eliminating the noise generated by products using this technique, meaning that customers do not need filters to compensate for the noise. Omnipolar capability with high and low duty cycle options allows for use in a variety of potential applications with low power requirements and/or battery operation. Thermally balanced integrated circuit provides for stable operation over a wide temperature range, of -40 to 85 C [-40 to 185 F]. SOT-23 subminiature package requires less PCB space, allowing for use in smaller assemblies. North pole or South pole operation does not require the magnet polarity to be identified, making installation easier and potentially reducing system costs. Supplied on tape and reel which allows for a compact design with automated component placement, helping to reduce manufacturing costs. Potential applications include motion control, lid closure detection, presence-absence, metering, and displacement sensing on battery-operated, mobile equipment such as computer notebooks, scanners, handheld industrial computers, instrumentation and appliances. HALL-EFFECT SENSOR ICS DIGITAL SS30AT, SS40A, SS50AT. Features: Bipolar magnetics * Sinking output * High output current capability * High speed capability * Reverse polarity protection * Small through-hole and surface mount (SOT-23 and SOT-89B) packages * Tape and reel available Benefits: Integrated circuitry provides enhanced temperature stability in a robust design. Thermally balanced integrated circuit over full temperature range. Built-in regulator provides stable operation over supply voltage range. Open-collector sinking output voltage easily interfaces with wide variety of electronic circuits. Internal circuitry prevents sensor damage in case supply voltage polarity is accidentally reversed. Potential applications include speed and RPM sensing, brushless dc motor commutation, motor and fan control, magnetic encoding, disc speed, tape rotation, and flow-rate sensing. SS311PT, SS411P. Features: Bipolar magnetics * Enhanced sensitivity * Built-in pull-up resistor * Low voltage: 2.7 Vdc to 7 Vdc * Subminiature package size (SS311PT) * Through-hole and surface-mount (SOT-23 and SOT-89B) packages * Cost effective Benefits: Enhanced sensitivity often allows for use of smaller, less expensive magnets. Built-in pull-up resistor easily interfaces with common electronic circuits without adding external components, helping to reduce total system cost. 2.7 Vdc to 7 Vdc supply voltage range allows use in low voltage continued on page 10 Magnetic Sensors Line Guide Precision. Repeatability. Ruggedness. Each Honeywell S&PS magnetic sensor IC is engineered to provide top performance: Hall-effect sensor ICs are constructed from a thin sheet of conductive material with output connections perpendicular to the direction of current flow. Low power Halleffect sensor ICs digital SL353 Series Description micropower omnipolar digital Hall-effect sensor IC Magnetic actuation type omnipolar Package style (packaging) SOT-23 (pocket tape and reel) Supply voltage range 2.2 Vdc to 5.5 Vdc Supply current SL353LT: 1.8 A typ. at 2.8 Vdc SL353HT: 0.33 mA typ. at 2.8 Vdc Output type digital Magnetoresistive sensor ICs have a built-in magnetoresistive bridge integrated on silicon, encapsulated in a plastic package. The sensitive integrated circuit responds to low (25 G max.) fields at distances up to 1 inch. Operating temperature range -40 C to 85 C [-40 F to 185 F] Hall-effect vane sensor ICs consist of a magnet and a Halleffect sensor inside a rugged plastic housing. Different package styles provide mounting flexibility. Hall-effect sensor ICs - digital Gear tooth sensors use a magnetically biased Halleffect IC to sense movement of ferrous metal targets. The specially designed IC is sealed in a durable plastic probe-type package. Additional built-in benefits: true solid state, extended life (30 billion operations in a module test program), high speed operation (over 100 kHz), stationary input (zero speed), no moving parts, logic compatible output, and broad temperature range (-40 C to 150 C [-40 F to 302 F]). 2 SS30AT, SS40A, SS50AT SS340RT, SS440R Series Description low-cost bipolar digital Hall-effect sensor IC unipolar Hall-effect digital sensor IC Magnetic actuation type bipolar SS340RT: North pole SS440R: South pole Package style (packaging SS30AT: SOT-23 (pocket tape and reel) SS40A: flat TO-92-style, standard straight leads (bulk) SS50AT: SOT-89B (pocket tape and reel) SS340RT: SOT-23 (pocket tape and reel) SS440R: flat TO-92-style, standard straight leads (bulk) Supply voltage range 4.5 Vdc to 24 Vdc 3 Vdc to 24 Vdc, except SS340RT >125 C [257 F]: 3 Vdc to 12 Vdc Supply current 10 mA max. 8 mA Output type digital sinking digital sinking Operating temperature range SS40A: -40 C to 125 C [-40 F to 257 F] SS30AT, SS50AT: -40 C to 125 C [-40 F to 257 F] SS340RT (3 Vdc to 24 Vdc): -40 C to 125 C [-40 F to 257 F] SS340RT (3 Vdc to 12 Vdc): -40C to 150 C [-40C to 302 F] SS440R (3 Vdc to 24 Vdc): -40 C to 150 C [-40 F to 302 F] Sensing and Productivity Solutions Hall-effect sensor ICs - digital SS345PT, SS445P SS351AT, SS451A, SS551AT Description unipolar Hall-effect digital sensor IC omnipolar Hall-effect digital sensor IC Magnetic actuation type unipolar omnipolar Package style (packaging SS345PT: SOT-23 (pocket tape and reel) SS445P: flat TO-92-style, standard straight leads (bulk) SS351AT: SOT-23 (pocket tape and reel) SS451A: flat TO-92-style, standard straight leads (bulk) SS551AT: SOT-89B (pocket tape and reel) Supply voltage range 2.7 Vdc to 7.0 Vdc 3 Vdc to 24 Vdc, except SS351AT >125 C [257 F]: 3 Vdc to 12 Vdc Supply current 14 mA 9 mA Output type digital sinking digital sinking -40 C to 150 C [-40 F to 302 F] SS351AT (3 Vdc to 24 Vdc): -40 C to 125 C [-40 F to 257 F] SS351AT (3 Vdc to 12 Vdc): -40 C to 150 C [-40 C to 302 F] SS451A, SS551AT (3 Vdc to 24 Vdc): -40 C to 150 C [-40 F to 302 F] Operating temperature range Hall-effect sensor ICs - digital SS360NT, SS360ST, SS360ST10K, SS460S, SS460S-T2 SS360PT, SS460P, SS460P-T2 SS361CT, SS461C Description high sensitivity latching Hall-effect digital sensor IC high sensitivity latching Hall-effect digital sensor IC with built-in pull-up resistor high sensitivity latching Hall-effect digital sensor IC Magnetic actuation type latching latching latching Package style (packaging) SS360NT, SS360ST, SS360ST-10K: SOT-23 (pocket tape and reel) SS460S: flat TO-92-style, standard straight leads (bulk) SS460S-T2: flat TO-92-style, formed leads; (ammopack tape-in-box) SS360PT: SOT-23 (pocket tape and reel) SS460P: flat TO-92-style, standard straight leads (bulk) SS460P-T2: flat TO-92-style, formed leads (ammopack tape-in-box) SS361CT: SOT-23 (pocket tape and reel) SS461C: flat TO-92-style, standard straight leads (bulk) Supply voltage range 3 Vdc to 24 Vdc 3 Vdc to 24 Vdc 4 Vdc to 24 Vdc Supply current 8 mA max. 10 mA max. 6 mA max. Output type digital digital digital sinking Operating temp. range -40 C to 125 C [-40 F to 257 F] -40 C to 125 C [-40 F to 257 F] -40 C to 125 C [-40 F to 257 F] Sensing and Productivity Solutions 3 Magnetic Sensors Line Guide Hall-effect sensor ICs - digital SS361RT, SS461R VF360NT, VF360ST, VF460S SS400, SS500 Series Description latching Hall-effect digital sensor IC high sensitivity latching digital Hall-effect sensor IC SS400: unipolar/bipolar/latching Hall-effect digital sensor IC SS500: unipolar/bipolar/latching Hall-effect digital sensor IC Magnetic actuation type latching latching unipolar, bipolar, latching Package style (packaging) SS361RT: SOT-23 (pocket tape and reel) SS461R: flat TO-92-style, standard straight leads (bulk) VF360NT, VF360ST: SOT-23 (pocket tape SS400: flat TO-92-style, standard straight and reel) leads (bulk) VF460S: flat TO-92-style, standard straight SS500: SOT-89B (pocket tape and reel) leads (bulk) Supply voltage range 3 Vdc to 18 Vdc, except SS361RT >125 C [257 F]: 3 Vdc to 12 Vdc 3 Vdc to 24 Vdc 3.8 Vdc to 30 Vdc (inclusive) Supply current 8 mA 8 mA max. SS400: 10 mA SS500: 8.7 mA at 5 Vdc Output type digital sinking digital sinking digital sinking Operating temperature range SS361RT (3 V to 12 V), SS461R: 40 C to 150 C [-40 F to 302 F] SS361RT (3 V to 18 V): -40 C to 125 C [-40 F to 257 F] Hall-effect sensor ICs - digital 40 C to 150 C [-40 F to 302 F -40 C to 150 C [-40 F to 302 F] SS41, SS51T SS42R VF526DT Description bipolar Hall-effect digital sensor IC latching Hall-effect digital sensor IC with dual active, high/active low complementary outputs latching dual Hall-effect digital sensor IC with speed and direction outputs Magnetic actuation type bipolar latching latching Package style (packaging) SS41: flat TO-92-style, standard straight leads (bulk) SS51T: SOT-89B (pocket tape and reel) 4-pin SIP SOT-89B (pocket tape and reel) Supply voltage range 4.5 Vdc to 24 Vdc 4.5 Vdc to 16 Vdc 3.4 Vdc to 24 Vdc Supply current 15 mA max. 11 mA max. Off: 12 mA max. On: 14 mA max. Output type digital sinking digital sinking or sourcing digital voltage, dual open collector sinking Operating temperature range -40 C to 150 C [-40 F to 302 F] 0 C to 100 C [32 F to 212 F] -40 C to 125 C [-40 F to 257 F] 4 Sensing and Productivity Solutions Hall-effect sensor ICs - linear SS39ET, SS49E, SS49E-F, SS49E-L, SS49E-T2, SS49E-T3, SS59ET SS490/SS491B Series Description Hall-effect linear sensor IC Hall-effect linear sensor IC Magnetic actuation type linear linear Package style (packaging) SS39ET: SOT-23 (pocket tape and reel) SS49E: flat TO-92-style, standard straight leads (bulk) SS49E-F: flat TO-92-style, formed leads (bulk) flat TO-92-style, standard straight leads (bulk) SS49E-L: flat TO-92-style, long straight leads (bulk) SS49E-T2: flat TO-92-style, formed leads (tape and reel) SS49E-T3: flat TO-92-style, standard straight leads (tape and reel) SS59ET: SOT-89B (pocket tape and reel) Supply voltage range 2.7 Vdc to 6.5 Vdc 4.5 Vdc to 10.5 Vdc Supply current 10 mA max. 10 mA Output type ratiometric sourcing ratiometric sinking or sourcing Operating temperature range -40 C to 100 C [-40 F to 212 F] -40 C to 150 C [-40 F to 302 F] Magnetoresistive sensor ICs Nanopower Series Standard Power Series 2SS52M Series Description omnipolar magnetoresistive sensor IC omnipolar magnetoresistive sensor IC omnipolar magnetoresistive digital sensor IC Magnetic actuation type omnipolar omnipolar omnipolar Package style (packaging) SOT-23 (pocket tape and reel) SM351RT, SM353RT: SOT-23 (pocket tape and reel) SM451RT, SM453RT: flat TO-92-style, standard straight leads (bulk) U-pack, straight leads (bulk) Supply voltage range 1.65 Vdc to 5.5 Vdc 3 Vdc to 24 Vdc 3.8 Vdc to 30 Vdc Supply current SM351LT: 360 nA typ. SM353LT: 310 nA typ. 8 mA max. 11 mA max. Output type low: 0.03 V typ. high: Vs-0.03 V typ. digital sinking digital sinking Operating temperature range -40 C to 85 C [-40 F to 185 F] -40 C to 85 C [-40 F to 185 F] -40 C to 150 C [-40 F to 302 F] Sensing and Productivity Solutions 5 Magnetic Sensors Line Guide Magnetoresistive sensor ICs SS552MT Series VF401 APS00B Description omnipolar magnetoresistive digital sensor IC 2-wire MR fine-pitch ring magnet sensor IC high resolution magnetic displacement sensor IC Magnetic actuation type omnipolar differential bridge analog, saturated mode Package style SOT-89B (pocket tape and reel) flat TO-92-style, standard straight leads (bulk) SOIC-8 (pocket tape and reel) Supply voltage range 3.8 Vdc to 30 Vdc 4.5 Vdc to 16 Vdc 1 Vdc to 12 Vdc Supply current 11 mA max. operate: 16.8 mA max. release: 8.4 mA max. 7 mA max. Output type digital sinking digital sourcing dual analog voltages responding to changes in magnetic field angle Operating temp. range -40 C to 150 C [-40 F to 302 F] -40 C to 150 C [-40 F to 302 F] -40 C to 150 C [-40 F to 302 F] Value-added Halleffect sensors 103SR Series (Digital) 103SR Series (Linear) Description Hall-effect digital position sensor Hall-effect linear position sensor Package material and style aluminum threaded barrel aluminum threaded barrel Magnetic actuation unipolar, bipolar, latching linear Operation proximity to external magnet proximity to external magnet Supply voltage range 4.5 Vdc to 24 Vdc 4.5 Vdc to 10.5 Vdc Supply current 4 mA to 10 mA (inclusive) 7 mA Output type digital sinking ratiometric sinking/sourcing Operating temperature range -40 C to 100 C [-40 F to 212 F] -40 C to 100 C [-40 F to 212 F] 6 Sensing and Productivity Solutions Value-added Halleffect sensors Description SR3 Series SR4 Series Hall-effect digital position sensor magnetoresistive digital position sensor Package material and style plastic threaded barrel plastic threaded barrel Magnetic actuation unipolar, bipolar omnipolar Operation proximity to external magnet proximity to external magnet Supply voltage range 4.5 Vdc to 24 Vdc 3.8 Vdc to 30 Vdc Supply current 10 mA 11 mA Output type digital sinking digital sinking Operating temperature range -40 C to 85 C [-40 F to 185 F] -40 C to 85 C [-40 F to 185 F] Value-added Halleffect sensors SR16/SR17 Series Description low-cost Hall-effect vane sensor Package material and style SR16: plastic dual tower with variety of terminations SR17: plastic side-mount wire exit Magnetic actuation - Operation ferrous metal actuator Supply voltage range 3.8 Vdc to 30 Vdc Supply current 10 mA max. Output type digital sinking Operating temperature range -20 C to 85 C [-4 F to 185 F] Sensing and Productivity Solutions 7 Active speed sensors SNG-Q Series SNDH-T Series LCZ Series Description quadrature speed and direction sensor with 4-wire quadrature sensor dual differential Hall-effect quadrature speed and direction sensor single Hall-effect zero speed sensor Housing material PBT stainless steel and plastic stainless steel Supply voltage range 4.5 V to 26 V 4.5 Vdc to 18 Vdc 4.5 Vdc to 26 Vdc Supply current 2 mA normal, 18 mA max. 18 mA max. 20 mA Output type square wave square wave digital sinking Operating frequency range 3 Hz to 20 kHz 1 Hz to 15 kHz 0 Hz to 15 kHz Operating temperature range -40 C to 150 C [-40 F to 302 F] -40 C to 150 C [-40 F to 302 F] 40 C to 125 C [-40 F to 257 F] ZH10 Series SNDH-H Series 1GT Series Description single Hall-effect zero speed sensor single Hall-effect speed sensor single Hall-effect speed sensor Housing material aluminum stainless steel or plastic plastic Supply voltage range 4 Vdc to 24 Vdc 4 Vdc to 24 Vdc (inclusive) 4.5 Vdc to 24 Vdc Supply current 6 mA 20 mA max. 20 mA max. Output type digital sinking digital sinking digital sinking (open collector) Operating frequency range 0 Hz to 15 kHz 0 Hz to 15 kHz, 2 Hz to 15 kHz 50 Hz to 10 kHz Operating temperature range -40 C to 125 C [-40 F to 257 F] -40 C to 150 C [-40 F to 302 F] continuous -40 C to 150 C [-40 F to 302 F ], short term to 160 C [320 F] 302 F] Active speed sensors Digital magnetic speed sensors 584XX Series Description digital magnetic speed sensor Housing material stainless steel Supply voltage range 5 Vdc to 30 Vdc Supply current 15 mA Output type square wave Operating frequency range - Operating temperature range -40 C to 107 C [-40 F to 225 F] 8 Sensing and Productivity Solutions Passive speed sensors VRS General Purpose Series VRS Hazardous Location Series Output voltage range 8 Vp-p to 40 Vp-p (inclusive) 30 Vp-p to 60 Vp-p (inclusive) Housing diameter 5/8 in, 3/8 in, 1/4 in, 10/32 in 3/4 in, 5/8 in Housing material and style stainless steel threaded or smooth stainless steel threaded Termination MS3106 connector, preleaded MS3106 connector, preleaded Operating temperature range -55 C to 120 C [-67 F to 250 F] (inclusive) -73 C to 120 C [-100 F to 250 F] (inclusive) Passive speed sensors VRS High Output Series VRS High Resolution Series Output voltage range 8 Vp-p to 190 Vp-p (inclusive) 17 Vp-p to 170 Vp-p Housing diameter 5/8 in, 3/8 in 5/8 in, 3/8 in Housing material and style stainless steel threaded or smooth stainless steel threaded Termination MS3106 connector, preleaded MS3106 connector, preleaded Operating temperature range -55 C to 150 C [-67 F to 300 F] (inclusive) -55 C to 120 C [-67 F to 250 F] Passive speed sensors VRS High Temperature Series VRS Power Output Series Output voltage range 4.7 Vp-p to 125 Vp-p (inclusive) 70 Vp-p (inclusive) Housing diameter 5/8 in, 3/8 in, 1/4 in 5/8 in Housing material and style stainless steel threaded stainless steel threaded Termination MS3106 connector, preleaded MS3106 connector, preleaded Operating temperature range -73 C to 230 C [-100 F to 450 F] (inclusive) -55 C to 120 C [-67 F to 250 F] Sensing and Productivity Solutions 9 applications, promoting energy efficiency. Subminiature package size (SS311PT) allows for compact design. SS311PT is available on tape and reel for high volume, automated component placement, helping to reduce manufacturing costs. Potential applications include speed and RPM sensing, brushless dc motor commutation, tachometer, counter pickup, motor and fan control, flow-rate sensing, and robotics control. SS340RT, SS440R Series. Features: Unipolar magnetics: SS340RT responds to North pole; SS440R responds to South pole * Subminiature package size (SS340RT) * Multiple magnetic sensitivities (high, medium and low) * Low voltage 3 V capability * Built-in reverse polarity protection * Thermally balanced integrated circuit over full temperature range Benefits: Supplied in three different magnetic sensitivities to meet wide range of potential applications. The SS341RT and SS441R offer the highest sensitivity, with a typical operating point of 85 G at 25 C [77 F]; the SS343RT and SS443R offer medium sensitivity with 125 G typical at 25 C [77 F]; the SS349RT and SS449R offer the lowest sensitivity, requiring 350 G typical to operate at 25 C [77 F]. The SS340RT's small size requires less PC board space, allowing it to be used in smaller assemblies. Its 3 V capability allows for use in low voltage applications, promoting energy efficiency. The SS340RT Series is available on tape and reel (3000 units per reel); the SS440R Series is available in a bulk package (1000 units per bag). Potential applications include door or lid closure detection, speed and RPM sensing in fitness equipment, flow rate sensing, damper or valve position control, cylinder position monitoring, float-based fluid level sensing and printer head position sensing. SS345PT, SS445P. Features: Unipolar magnetics * Subminiature package size (SS345PT) * Tape and reel packaging (SS345PT) * Small, flat TO-92-style package (SS445P) * Simple activation from a North pole (SS345PT) or a South pole (SS445P) * Low voltage 2.7 V capability * Built-in pull-up resistor 10 Sensing and Productivity Solutions Benefits: Subminiature package size (SS345PT) uses less space on the PCB than standard Hall-effect sensor packages such as flat TO-92-style or SOT-89B, allowing for use in smaller assemblies. Tape and reel packaging (SS345PT) allows for automated component placement, helping to reduce manufacturing costs. Small, flat TO-92-style package (SS445P) is also available. 2.7 Vdc to 7 Vdc capability allows for use in low voltage applications, promoting energy efficiency. Built-in pull-up resistor can easily interface with common electronic circuits without adding external components, helping to reduce total system cost. Simple activation from a North pole (SS345PT) or a South pole (SS445P). Potential applications include speed and RPM sensing in fitness equipment, flow rate sensing in appliances and industrial processes, displacement sensor in hospital beds and medical equipment and medication bin monitor on portable drug carts. SS351AT, SS451A, SS551AT. Features: Omnipolar magnetics * Small through-hole and surface mount (SOT-23 and SOT-89B) packages * Simple activation from either South pole or North pole * Low voltage 3 V capability * Built-in reverse polarity protection * Thermally balanced integrated circuit over full temperature range Benefits: Available in three package styles: SS351AT in the subminiature SOT-23 surface mount; the SS551AT in the SOT-89B surface mount, and the SS451A in the leaded, flat TO-92-style. The SS351AT's small size requires less PC board space, allowing it to be used in smaller assemblies. Its 3 Vdc capability allows for use in low voltage applications, promoting energy efficiency. Subminiature package size (SS351AT) supplied on tape and reel allows for a compact design with automated component placement, helping to reduce manufacturing costs. Operated by a North pole or a South pole, these products do not require the magnet polarity to be identified, thus making the installation easier and potentially reducing system cost. Built-in reverse polarity protection protects the device from potential damage during installation. Thermally balanced integrated circuit provides for stable operation over a wide temperature range. Potential applications include speed and RPM (revolutions per minute) sensing in fitness equipment, magnetic encoder for building access, damper or valve position control in HVAC (heating, ventilation and air conditioning) equipment, flow rate sensing in appliances and industrial processes, robotic control (cylinder position monitoring), displacement sensor in hospital beds, and medical equipment. SS360NT, SS360ST, SS360ST-10K, SS460S, SS460S-T2. Features: Fastest response time in its class * No chopper stabilization * High sensitivity * Latching magnetics * Sub-miniature, SOT-23 surface mount package (SS360NT, SS360ST, SS360ST10K) supplied on tape and reel * Small, leaded, flat TO-92-style package (SS460S, SS460St-T2) * Wide operating voltage range of 3 Vdc to 24 Vdc * Built-in reverse voltage * Durable design * RoHScompliant material Benefits: Fastest response time in its class provides more efficiency in commutating brushless dc motors. No chopper stabilization results in a clean output signal. Operates from only 30 Gauss typical, at 25C [77 F] and 55 Gauss maximum over the full -40 C to 150 C [-40 F to 302 F] temperature range, allowing for the use of smaller, magnets or a wider air gap. Latching magnetics make these products well-suited for accurate speed sensing and RPM measurement; the SS360NT is turned ON by a North pole while the SS360ST and SS460S are turned ON by a South pole. Small size allows for compact design with automated component placement, as well as compact PC board layout. Wide operating voltage range allows for potential use in a wide range of applications. Built-in reverse voltage enhances the protection of the sensor and the circuits. Durable design allows operation up to 150 C [302 F]. Potential applications include industrial/commercial brushless dc motor commutation, flow rate sensing and motor and fan control; transportation speed and RPM sensing, tachometer, counter pickup and convertible roof position; medical equipment using electric motors. SS360PT, SS460P, SS460P-T2. Features: Fastest response time in its class * No chopper stabilization * High sensitivity * Internal pull-up Hall IC design * Latching magnetics * Subminiature package size with tape and reel packaging * Small, flat TO-92style package * Wide operating voltage range of 3 Vdc to 24 Vdc * Built-in reverse voltage capability * Robust design * RoHS-compliant meets directive 2002/95 Benefits: Fastest response time in its class provides more efficiency in commutating a brushless dc motor. No chopper stabilization results in a clean output signal. Operates from only 30 Gauss typical, at 25 C [77 F] and 55 Gauss maximum over the full -40 C to 125 C [-40 F to 257 F] temperature range, allowing for the use of smaller, magnets or a wider air gap. Internal pullup Hall IC design simplifies installation and helps reduce component count and system cost. Latching magnetics make these products well-suited for accurate speed sensing and RPM (revolutions per minute) measurement. Sub-miniature, SOT-23 surface mount package (SS360PT) supplied on tape and reel allows for compact design with automated component placement. Small, leaded, flat TO-92-style package (SS460P) allows for a compact PC board layout. Wide operating voltage range allows for potential use in a wide range of applications. Built-in reverse voltage capability enhances the protection of the sensor and the circuits. Robust design allows operation up to 125 C [257 F]. Potential industrial/commercial applications include brushless dc motor commutation for white goods and other appliances, flow rate sensing, speed and RPM sensing, tachometer and counter pickup, and motor and fan control. SS361CT, SS461C. Features: Enhanced sensitivity * Latching magnetics * Subminiature package size with tape and reel packaging (SS361CT) * Small, flat TO-92-style package (SS461C) * Simple activation from a North pole (SS361CT) or a South pole (SS461C) * Built-in reverse voltage capability Benefits: Enhanced sensitivity allows operation from only 50 G typ. at 25 C [77 F], 80 G max. at 60 C to 85 C [140 F to 185 F], and 95 Gauss over the full temperature range of -40 C to 125 C [-40 F to 257 F], allowing the use of smaller, potentially lower-cost magnets or wider air gaps. Wide operating voltage range of 4 Vdc to 24 Vdc for use in wide range of potential applications. Subminiature package size (SS361CT) uses less space on the PCB than standard Hall-effect sensor packages such as TO-92 or SOT89, allowing for use in smaller assemblies. Tape and reel packaging (SS361CT) allows for automated component placement, helping to reduce manufacturing costs. Small, flat TO-92-style package (SS461C) is also available. Built-in reverse voltage capability enhances protection of sensor and circuits with which it is used. Latching magnetics respond to alternating North and South poles, making these products well-suited for accurate speed sensing and RPM measurement. Potential applications include tachometer, counter pickup, motor and fan control, flow-rate sensing for appliances, robotics control, and medical equipment using electric motors. SS361RT, SS461R. Features: Latching magnetics * Enhanced sensitivity * Subminiature package size (SS361RT) * Low voltage: 3 V operation * Built-in reverse polarity protection * Robust design: will operate up to 150 C [302 F] * Through-hole and surface-mount (SOT-23 and SOT-89) packages Benefits: Enhanced sensitivity often allows for the use of less expensive magnets. Small size requires less PC board space, allowing it to be used in smaller assemblies. 3 V capability allows for use in low voltage applications, promoting energy efficiency. Available on tape and reel for most high volume applications. Potential applications include speed and RPM sensing, brushless dc motor commutation, tachometer, counter pickup, motor and fan control, electric window lift, convertible roof position and automotive transmission position detection, flow-rate sensing, robotics control. VF360NT, VF360NT, VF460S. Features: Qualified to the AEC-Q100 standard for potential use in automotive applications * Fastest response time in its class (1.5 s) * Operate from 30 Gauss typical at 25C [77 F] and 55 Gauss maximum over the full -40 C to 150 C [-40 F to 302 F] temperature range * Latching magnetics * Repeatable magnetics (no jitter) * No additional electronic noise generated by sensor * Non-chopper-stabilized design * VF360NT and VF360ST subminiature SOT-23 surface mount package supplied on tape and reel (3000 units per reel), VF460S flat TO-92-style package (1000 units per bag) * 3 Vdc to 24 Vdc * Built-in reverse polarity protection * RoHS-compliant material Benefits: May be used in potential transportation applications such as BLDC motor commutation for automotive applications (air input flap to engine, convertible roof position, electronic parking brakes, electronic window lifts and anti-pinch power window systems, HVAC blowers, headlights, power doors, mirrors and tail gates, seat motors, steering, windshield washers and wipers), speed and RPM sensing (motors and fans; tachometer and counter pickup), and flow rate sensing SS400/SS500 Series. Features: Unipolar, bipolar, latching magnetics * Sinking output * Multiple operate/release points available * Temperature compensated magnetics with negative slope * High output current capability * Small through-hole and surface-mount (SOT-89) packages * Tape and reel available Benefits: Quad Hall element design minimizes effects of mechanical or thermal stress on output and provides stable output. Negative compensation slope optimized to match negative temperature coefficient of lower cost magnets, providing robust design over wide temperature range. Band gap regulation provides stable operation over supply voltage range. Potential applications include speed and RPM sensing, brushless dc motor commutation, motor and fan control, Sensing and Productivity Solutions 11 magnetic encoding, disc speed, tape rotation, flow-rate sensing, lid and door closing detection, and position sensing. SS41, SS51T Series. Features: Bipolar magnetics * Sinking output * High output current capability * Reverse polarity protection Benefits: Built-in regulator provides enhanced operational stability over supply voltage range. Open-collector digital sinking output voltage easily interfaces with wide variety of electronic circuits. Internal circuitry prevents sensor damage in case supply voltage polarity is accidentally reversed. Potential applications include brushless dc motor commutation, motor and fan control, magnetic encoding, and tape rotation sensing. SS42R. Features: Hall effect * Latching magnetics * Sinking or sourcing outputs * High output current capability * Reverse polarity protection Benefits: Hall-effect integrated circuit with pair of complementary push/pull outputs. Dual Hall-effect element offsets stressinduced noise and drift. Operate and release points laser trimmed to improve symmetry around zero. Internal circuitry prevents sensor damage if supply voltage polarity is accidentally reversed. Potential applications include conveyors, motor control, ignitions, power sensing, linear or rotary motion detection, and RPM sensing. [-40 F to 257 F]. Wide operating voltage range of 3.4 Vdc to 24 Vdc increases application flexibility. Tested to moisture sensitivity similar to JEDEC J-STD-020B, MSL Level 1, allowing use in environments where humidity may be a problem. Miniature plastic package supplied on tape and reel for automated assembly, allowing potential savings in PC board space and labor cost. Potential applications include anti-pinch electric motor control systems for power window and seats, magnetic encoding for electronic steering systems, motion control systems for pulleys and belts, garage door openers and sliding doors and position and velocity detection in industrial equipment. HALL-EFFECT SENSOR ICS LINEAR SS39ET, SS49E, SS49E-F, SS49E-L, SS49E-T2, SS49E-T3, SS59ET. Features: Linear magnetics * Ratiometric sourcing output * Low-voltage operation * Small, through-hole and surface-mount packages * Available on tape and reel Benefits: Thin film resistors provide enhanced temperature stability and accuracy. Low voltage operation for energy efficiency. Potential applications include current sensing, motor control, position sensing, magnetic code reading, ferrous metal detection, vibration, and liquid level sensing. VF526DT. SS490/SS491B Series. Features: Frequency signal for speed output and logic level signal for direction output * Temperature-compensated magnetics and ultra-low offset drift * Wide operating voltage range * Miniature, SOT89B plastic package * Tape and reel Features: Linear magnetics * Ratiometric sourcing output * Positive temperature coefficient * Different package styles Benefits: Two separate, built-in Hall sensors and associated logic circuitry provide a frequency signal for speed output and a logic level (high or low) signal for direction output, potentially replacing multiple sensors and electronic components. Temperature-compensated magnetics and ultra-low offset drift with temperature provide a stable output over a full temperature range of -40 C to 125 C 12 Sensing and Productivity Solutions Benefits: Quad Hall elements design minimizes effects of mechanical or thermal stress on output and provides stable output. Laser-trimmed thin film resistors provide enhanced accuracy and temperature compensation to reduce null and gain shift over temperature. Positive temperature coefficient helps compensate for negative temperature coefficients of low cost magnets, providing robust design over wide temperature range. Rail-to-rail operation provides more usable signal for enhanced resolution. Potential applications include current sensing, motor control, position sensing, magnetic code reading, rotary encoding, liquid level sensing, vibration, and weight sensing applications. MAGNETORESISTIVE SENSOR ICS Nanopower Series. Features: High sensitivity * Nanopower * Supply voltage range of 1.65 Vdc to 5.5 Vdc * Omnipolar sensing * Temperature range of -40 C to 85 C [-40 to 185 F] * Push-pull (CMOS) output * Non-chopper stabilized design * RoHS-compliant materials * Subminiature SOT-23 package Benefits: High sensitivity of 7 Gauss typ., 11 Gauss max. (SM351LT); 14 G typ., 20 Gauss max. (SM353LT) suitable for a wide range of applications with large air gaps, small magnetic fields and low power requirements. Average current of 360 nA typ. (SM351LT) and 310 nA typ. (SM353LT) allows for use in battery operated equipment. Responds to either a North or South Pole, eliminating the need for the magnet polarity to be identified. Push-pull output eliminates the need for external resistors and helps reduce production costs. Non-chopper stabilized design eliminates external noise generated by the sensor. SOT-23 package on tape and reel (3000 units per reel). Designed for potential use in a wide range of battery-operated applications including water and gas meters, electricity meters, industrial smoke detectors, exercise equipment, security systems, hand-held computers and scanners; white goods such as dishwashers, microwaves, washing machines, refrigerators and coffee machines; medical equipment such as hospital beds, medication dispensing cabinets, infusion pumps; consumer electronics such as notebook computers, tablets, and cordless speakers. Standard Power Series. Features: High sensitivity: 7 Gauss typ., 11 Gauss max. (SM351RT and SM451R); 14 Gauss typ., 20 Gauss max. (SM353RT and SM453R) * Supply voltage range of 3 Vdc to 24 Vdc simplifies design-in * Omnipolar sensing * Temperature range of -40 C to 85 C [-40 F to 185 F] * RoHS-compliant materials: Meets Directive 2002/95/EC * SOT-23 or flat TO-92-style package Benefits: Ultra-sensitive devices designed for manufacturers who need a durable and reliable speed or position sensor for large air gaps or small magnetic fields in standard power (3 Vdc to 24 Vdc) applications. Respond to either North or South pole applied in direction parallel to sensor; do not require magnet polarity to be identified, simplifying installation and potentially reducing system cost. SOT-23 and flat TO-92-style packages, as well as two magnetic sensitivities, accommodate variety of application needs. SOT-23 surface mount package supplied on tape and reel (3000 units per reel) for use in automated pick-and-place component installation. Potential industrial applications include high frequency flow sensing in HVAC, water, fuel, and gas utility meters; anti-tamper detection in water, electric, and gas utility meters; liquid level detection, motor RPM sensing, and in-cylinder position sensing. Potential medical applications include RPM sensing and magnetic interrupt in exercise and rehabilitation equipment, absence/ presence detection in infusion pumps, position sensing of medication dispensing cabinet drawers, and incline position sensing in hospital beds. Potential white goods applications include lid, door and drawer position detection, fluid flow detection, and liquid level detection. 2SS552M Series. Features: Omnipolar magnetics * Sinking output * Low gauss operation (25 G max.) * Operating speed of 0 kHz to over 100 kHz * Small, through-hole package * Tape and reel available Benefits: Low gauss operation (25 G max.) extends sensing distance to one inch or more, depending on size. Potential polarity independent applications include presence/absence detection, lid sensor for laptop computers, position sensing for material handling equipment, and cylinder position sensing in pneumatic cylinders. SS552MT. Features: Magnetorestive * Omnipolar magnetics * Sinking output * Low gauss operation (25 G max.) * Operating speed of 0 kHz to over 100 kHz * Small, surface mount package * Tape and reel Benefits: Low gauss operation (25 G max.) extends sensing distance to one inch or more, depending on size. Small, surface-mount package allows automated, lower-cost assembly. Potential polarity independent applications include presence/absence detection, lid sensor for laptop computers, position sensing for material handling equipment, and cylinder position sensing in pneumatic cylinders. VF401. Features: 2-wire digital current output * Wide speed capability * One pulse per pole pair output and differential bridge operation * Output pattern independent of gap between target and sensor * Improved insensitivity to run-out, tilt and twist * Enhanced sensitivity * Reverse polarity protection * Miniature, TO-92-style plastic package Benefits: High performance, digital, 2-wire, magnetoresistive sensor in a miniature, flat, TO-92-style plastic package with a current output designed for sensing fine pitch ring magnets. Wide speed capability provides application flexibility with true zero speed sensing and operation up to 3000 Hz. One pulse per pole pair output and differential bridge operation allow compatibility with differential Hall sensors, making it easier to upgrade existing applications. Enhanced sensitivity, 7 Gauss typical allows for larger air gaps (up to 2,5 mm [0.098 in]) and higher pole density (up to 50-pole pairs depending on ring diameter). Patented bridge array optimized to allow a greater air gap between the target and the sensor with reduced loss in sensor signal or accuracy. Potential applications include wheel speed sensing and shaft speed encoding using a multipole ring magnet in a wide variety of off road transportation, industrial and medical equipment. APS00B. Features: Dual bridges with outputs 45 out of phase * Wide, angular range * Low resolution capability * Absolute sensing * Typical 0 MHz to 5 MHz frequency response * Low power requirements * Small 8-pin SOIC package on tape and reel. Benefits: Wide, angular range allows measurements of 90 without additional components; measurements of 180 are possible with external components. Dual Wheatstone bridges provide passive, low-noise design, enhancing system performance. Outputs 45 out of phase may be used as speed and direction signals. Resolution capability of less than 0.05 enhances overall system accuracy. Absolute sensing means no indexing is required and the exact target position is known, simplifying system design. Typical 0 MHz to 5 MHz frequency response with 190 G minimum magnetic field applied makes this saturated mode sensor suitable for potential high speed applications. Measures only field direction and is virtually unaffected by shock, vibration and magnetic-source gap variations for stable and reliable output. Small, surface-mount package saves room on PC board when compared to larger IC packages and components. Tape and reel configuration (two sizes available) allows use with automated pick-and-place equipment, potentially reducing assembly costs. Honeywell APS00A instrumentation amplifier available separately for additional signal processing. Potential applications include high-accuracy angular position, speed and angle, and displacement sensing in a wide variety of off road transportation, medical and industrial equipment. VALUE-ADDED HALL-EFFECT SENSORS 103SR Series (Digital). Features: Unipolar, bipolar, latching magnetics * Sinking or sourcing output * Aluminum housing * Color-coded, jacketed cable * Adjustable mounting Benefits: Rugged, threaded aluminum housing. Choice of cable materials provides application flexibility. Potential applications include position and RPM sensing in non-corrosive applications. 103SR Series (Linear). Features: Linear magnetics * Ratiometric sinking/sourcing output * Aluminum housing * Color-coded, jacketed cable * Adjustable mounting Sensing and Productivity Solutions 13 Benefits: Rugged, threaded aluminum housing. Choice of cable materials provides application flexibility. Potential applications include position and RPM sensing in noncorrosive applications. SR3 Series. Features: Unipolar, bipolar magnetics * Sinking output * Frequencies exceeding 100 kHz Benefits: Plastic housing for position and RPM sensing in potential corrosive applications such as food and beverage, chemical plants, and refineries. SR4 Series. Features: Magnetoresistive * Omnipolar magnetics * Sinking output Benefits: Magnetoresistive technology allows longer sensing distance at lower gauss than Hall effect. Plastic housing for position and RPM sensing in potential corrosive applications such as food and beverage, chemical plants, and refineries. SR16/SR17 Series. Features: Sinking output * Non-contact position sensing * Compact, robust packages * Environmentally sealed package * Three terminations available Benefits: Internal magnet and Halleffect sensor mounted in dual tower or side mount configuration for application flexibility. Mechanically interchangeable with standard optical sensors. Medium level magnetic switching reduces stray field interference. No mechanical contacts often eliminates product wear. Environmentally sealed plastic package provides enhanced accuracy and repeatability in environments in which dirt, dust, or stray IR light might affect performance of optical solutions. Potential applications include position and speed sensing in fitness and information technology, as well as in moderate electrical, chemical, and mechanical environments. ACTIVE SPEED SENSORS SNG-Q Series. Features: Wide operating temperature range of -40 C to 150 C [-40 F to 302 F] * Environmental sealing: Moisture ingress protection rated to IP69k * Robust electrical 14 Sensing and Productivity Solutions noise immunity, EMC rated to 100 V/m * Enhanced frequency switching capability of 3 Hz to 20 kHz * Direction information from phase-shifted dual output signals * O-ring seal enables environmental sealing to mounting surface * Supply voltage range of 4.5 V to 26 V Benefits: Design and manufacturing platform-based approach enables costcompetitiveness and mechanical and electrical configurability. Provides both speed and direction information: speed from digital square wave outputs; direction using a quadrature output with signals 90 phase shifted from each other, target direction determined by output lead/lag phase shifting. Designed for applications where enhanced accuracy is required to detect small target features. Enhanced accuracy enabled by dual differential Halleffect sensor IC technology. Designed for wide operating temperature range, robust electrical noise immunity and industry leading environmental sealing capability. Potential industrial applications include power control in heavy duty vehicle ac induction motors and hydraulic pumps, speed and position control in escalators and elevators. Potential transportation applications include power regulation control of hybrid electric transmissions and engines in heavy duty vehicles, wheel speed detection in material handling, agriculture and construction machines. SNDH-T Series. Features: Advanced performance dynamic offset self calibration * Short circuit and reverse voltage protection * Air gap up to 2 mm [0.08 in] * Low jitter output * Near-zero speed * EMI hardened * High frequency switching capability * Multiple connector options includes wire harness and integral connector versions using AMP super seal or AMP Jr. * Probe-style package * Integrated circuit packaging provides output phase shift tolerancing with enhanced accuracy Benefits: Provides speed and direction information using quadrature output with signals 90 degree phase shifted from each other. BiCMOS Hall-effect technology, using advanced digital signal processing for dynamic off-set cancellation, provides enhanced air gap performance and phase shift accuracy over most conditions. Package design includes O-ring seal for potential pressure applications and a fixed mounting flange. Robust, automotive under-the-hood grade packaging for most environmental conditions as well as EMI hardened. Used in potential applications where high resolution is required at wide frequency ranges and large air gaps. LCZ Series. Features: Stainless steel package * Low cost * Omni-directional sensor to target orientation * Low power consumption * Small size * Zero speed * Digital output * Durable, cost-effective sensing solution * Screw-in package style Benefits: Available in several diameters and lengths for application flexibility. Stainless steel package simple to install/ adjust and does not require rotational orientation. Potential applications include harsh environment rotary applications such as pumps, rollers, mixers, fan speed measurement, transmission, spindles, gear reducer RPM, synchronization, compressor speed, and dyno testing, as well as industrial process control and factory automation. ZH10 Series. Features: Aluminum package * Low cost * Omni-directional sensor to target orientation * Low power consumption * Small size * Zero speed * Digital output * Durable, cost-effective sensing solution * Screw-in package style Benefits: Aluminum package simple to install/adjust and does not require rotational orientation. Potential applications include harsh environment rotary applications such as pumps, rollers, mixers, fan speed measurement, transmission, spindles, gear reducer RPM, synchronization, compressor speed, and dyno testing, as well as industrial process control and factory automation. SNDH-H Series. Features: Hall-effect magnetic sensing technology * Digital current sinking output (open collector) * Advanced performance dynamic offset self-calibration * Air gap up to 2,5 mm [0.098 in] * Zero speed versions * High frequency switching capability (0 Hz to 15 kHz) * -40 C to 150 C [-40 F to 302 F] operating temperature capability * Multiple connector options * O-ring seal Benefits: Use a magnetically biased Hall-effect integrated circuit to accurately sense movement of ferrous metal targets. The specially designed IC (integrated circuit) and a permanent magnet are sealed in rugged, probe-type packages. The flux density of the permanent magnet alters when approached by ferrous metal and is detected by the Hall ICs. If the sensor is positioned at the circumference of a revolving gear wheel, for example, it detects the teeth and tooth spaces, supplying a digital pulse output with frequency proportional to gear wheel speed. Potential applications include tachometers/counters, speed of gears and shafts in transmissions, hydraulic motors, pumps, and gear boxes flow meters/ turbines, and engine RPM. 1GT Series. Features: Senses movement of ferrous metal targets * Sealed in a probe-type package * 4.5 to 24 Vdc supply voltage * Digital, current sinking (open collector) output * Reverse polarity protection and built-in protection against pulsed transients to +60 V, -40 V * EMI resistant * Excellent low speed performance * Output amplitude not dependent on RPM * Wide continuous operating temperature range Benefits: Package provides physical protection and cost-effective installation. Electronically self adjusts to slight variations in runout and temperature, often simplifying installation and maintenance. Potential applications include transportation camshaft and crankshaft speed/position, transmission speed, tachometers, and anti-skid/traction control; industrial sprocket speed, chain link conveyor speed and distance, stop motion detector, high speed, low-cost proximity, tachometers and counters. DIGITAL MAGNETIC SPEED SENSORS 584XX Series. Features: Senses moving ferrous metal * Output signal of integrated circuit allows for direct use in digital equipment * Eliminates the need for interface circuitry, reducing installation and maintenance costs * Enhanced stability due to precisely-matched components * Extremely precise relationship between the physical position of any sensed object and the electrical signal produced provides improved accuracy to timing and positioning applications * Enhanced sensitivity Benefits: Excellent resistance to water, oil, shock and vibration damage extends the product life and operating reliability. A wide variety of supply voltages allow for application flexibility. Allows for the reduction in noise, often vital in potential positioning and synchronization applications. Pre-leaded or connector versions allow application flexibility. Standard thread sizes improve compatibility and interchangeability with other standard types of speed sensors. Potential applications include computing, high-speed counting, positioning, tachometry, synchronization, routing, flow metering, machine control, engine, motor, or pump RPM sensing, over/under speed sensing, and wheel speed detection. PASSIVE SPEED SENSORS (Variable Resistance Sensors - VRS) General Purpose Series, Hazardous Location Series, High Output Series, High Resolution Series, High Temperature Series, Power Output Series. Benefits: All series: Direct conversion of actuator speed to output frequency. VRS General Purpose Series, VRS Hazardous Location Series: Simple, rugged devices do not require external voltage source for operation. VRS High Output Series: Performs best at low to medium speeds with medium to high impedance loads. Sealed front-end versions available for use where sensor is exposed to fluids, lubricants, or adverse environmental conditions. VRS High Resolution Series: Proper sensor alignment is required. VRS High Temperature Series: Sealed front-end versions for potential applications where sensor is exposed to fluids, lubricants, or adverse environmental conditions. Potential applications: VRS General Purpose Series: Engine and motor RPM, process, flow, wheel-slip, and gear speed measurement with medium to high speeds or in electrically noisy environments with relatively small air gaps. VRS Hazardous Location Series: Engine and motor RPM, process, flow, wheel-slip, and gear speed measurement where explosion-proof or intrinsically safe sensors are required. VRS High Output Series: Engine and motor RPM, process, flow, wheel-slip, and gear speed measurement where higher output voltages are needed. VRS High Resolution Series: Engine and motor RPM, process, flow, wheel-slip, and gear speed measurement where precise timing pulse is required, and/or fine pitch gears are used. VRS High Temperature Series: Engine and motor RPM, process, flow, wheel-slip, and gear speed measurement where sensor is exposed to temperatures up to 260 C [450 F]. VRS Power Output Series: Driving low resistance loads at large air gaps in engine and motor RPM, process, flow, wheel-slip, and gear speed measurement where larger actuators may be used. Features: Self-powered operation * Simple installation * No moving parts * Operates over wide speed range * Adaptable to wide variety of configurations * Customized versions for potential unique speed sensing applications Sensing and Productivity Solutions 15 Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. To learn more about Honeywell Sensing and Productivity Solutions' products, call +1-815-235-6847 or 1-800-537-6945, visit sensing.honeywell.com, or e-mail inquiries to info.sc@honeywell.com Sensing and Productivity Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA honeywell.com 005894-20-EN IL50 March 2016 Copyright (c) 2016 Honeywell International Inc. All rights reserved.