Hyper TOPLED(R) Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB T673, LT T673 Released Besondere Merkmale * Gehausetyp: weies P-LCC-2 Gehause, farbloser klarer Verguss * Besonderheit des Bauteils: extrem breite Abstrahlcharakteristik; ideal fur Hinterleuchtungen und Einkopplungen in Lichtleiter * Wellenlange: 471 nm (blau), 532 nm (true green) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: InGaN * optischer Wirkungsgrad: 2 lm/W (blau), 8 lm/W (true green) * Gruppierungsparameter: Lichtstarke, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten und Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8-mm Gurt mit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D Features * package: white P-LCC-2 package, colorless clear resin * feature of the device: extremely wide viewing angle; ideal for backlighting and coupling in light guides * wavelength: 471 nm (blue), 532 nm (true green) * viewing angle: Lambertian Emitter (120) * technology: InGaN * optical efficiency: 2 lm/W (blue), 8 lm/W (true green) * grouping parameter: luminous intensity, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering and TTW soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8 mm tape with 2000/reel, o180 mm or 8000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D Anwendungen * Ampelanwendung * Informationsanzeigen im Auenbereich * optischer Indikator * Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) * Innenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung, u. a.) * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * Signal- und Symbolleuchten * Scanner Applications * traffic lights * outdoor displays * optical indicators * backlighting (LCD, switches, keys, displays, illuminated advertising, general lighting) * interior automotive lighting (e.g. dashboard backlighting, etc.) * marker lights (e.g. steps, exit ways, etc.) * signal and symbol luminaire * scanners 2008-06-05 1 LB T673, LT T673 Bestellinformation fur Gruppierung bei 10 mA Ordering Information for grouping at 10 mA Typ Emissionsfarbe Color of Emission Type Lichtstarke1) Seite 17 Lichtstrom2) Seite 17 Bestellnummer Luminous Intensity1) page 17 IF = 10 mA IV (mcd) Luminous Flux2) page 17 IF = 10 mA V (mlm) Ordering Code LB T673-L2N1-35 LB T673-M2P1-35 LB T673-L2P1-35 blue 14.0 ... 22.4 ... 14.0 ... 35.5 56.0 56.0 75 (typ.) 120 (typ.) 100 (typ.) Q65110A1954 Q65110A1955 Q65110A1956 LT T673-P1Q2-25 LT T673-Q1R2-25 LT T673-N2S1-25 true green 45.0 ... 112.0 71.0 ... 180.0 35.5 ... 224.0 240 (typ.) 380 (typ.) 350 (typ.) Q65110A1966 Q65110A1967 Q65110A1968 Bestellinformation fur Gruppierung bei 2 mA Ordering Information for grouping at 2 mA Typ Emissionsfarbe Color of Emission Type LT T673-L2N2-35 Anm.: true green Lichtstarke1) Seite 17 Lichtstrom2) Seite 17 Bestellnummer Luminous Intensity1) page 17 IF = 2 mA IV (mcd) Luminous Flux2) page 17 IF = 2 mA V (mlm) 14.0 ... 45.0 95 (typ.) Ordering Code Q65110A5953 Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 6 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LB T673-L2N1-35 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen L2, M1, M2 oder N1 enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LB T673-L2N1-35 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -3, -4, oder -5 enthalten ist (siehe Seite 6 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 6 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LB T673-L2N1-35 means that only one group L2, M1, M2 or N1 will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LB T673-L2N1-35 means that only 1 wavelength group -3, -4, or -5 will be shippable. In order to ensure availability, single wavelength groups will not be orderable (see page 6 for explanation). 2008-06-05 2 LB T673, LT T673 Vergleichstabelle fur 20 mA Correllation Table for 20 mA Typ Type Emissionsfarbe Color of Emission Lichtstarke1) Seite 17 Luminous Intensity1) page 17 IF = 10 mA IV (mcd) LB T673-L2N1-35 LB T673-M2P1-35 LB T673-L2P1-35 blue 14.0 ... 22.4 ... 14.0 ... 35.5 56.0 56.0 LT T673-P1Q2-25 LT T673-Q1R2-25 LT T673-N2S1-25 true green 45.0 ... 112.0 71.0 ... 180.0 35.5 ... 224.0 Lichtstarke2) Lichtstrom2) Seite 17 Seite 17 Luminous Intensity2) page 17 IF = 20 mA IV (mcd) Luminous Flux2) page 17 IF = 20 mA V (mlm) 40 (typ.) 65 (typ.) 55 (typ.) 120 (typ.) 195 (typ.) 165 (typ.) 125 (typ.) 195 (typ.) 205 (typ.) 375 (typ.) 585 (typ.) 615 (typ.) Siehe auch Grafik Seite 8 / see also graph on page 8 Vergleichstabelle fur 2 mA Correllation Table for 2 mA Typ Emissionsfarbe Lichtstarke Lichtstarke Lichtstrom 1) Seite 17 2) Seite 17 2) Seite 17 Type Color of Emission Luminous Intensity1) page 17 IF = 10 mA IV (mcd) Luminous Intensity2) page 17 IF = 2 mA IV (mcd) Luminous Flux2) page 17 IF = 2 mA V (mlm) LT T673-L2N2-35 true green 71.0 ... 224.0 14.0 ... 45.0 95 (typ.) Siehe auch Grafik Seite 8 / see also graph on page 8 2008-06-05 3 LB T673, LT T673 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values LB Einheit Unit LT Betriebstemperatur Operating temperature range Top - 40 ... + 100 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj Durchlassstrom Forward current (TA=25C) IF Stostrom Surge current t 10 s, D = 0.005, TA=25C IFM Sperrspannung3) Seite 17 Reverse voltage3) page 17 (TA=25C) VR 5 V Leistungsaufnahme Power consumption (TA=25C) Ptot 80 mW Rth JA 400 K/W Rth JS 180 K/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung4) Seite 17 Junction/ambient4) page 17 Sperrschicht/Lotpad Junction/solder point 2008-06-05 4 + 110 + 125 20 200 250 C mA mA LB T673, LT T673 Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 10 mA Symbol Symbol (typ.) Dominantwellenlange5) Seite 17 Dominant wavelength5) page 17 IF = 10 mA and IF = 2 mA for LT T673 Werte Values Einheit Unit LB LT peak 466 527 nm dom 471* 6 529* 12 nm Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 10 mA (typ.) 25 33 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 120 Grad deg. Durchlassspannung6 Seite 17) Forward voltage6) page 17 IF = 10 mA (min.) (typ.) (max.) VF VF VF 2.7 3.1 3.7 2.7 3.0 3.7 V V V Sperrstrom Reverse current VR = 5 V (typ.) (max.) IR IR 0.01 10 0.01 10 A A Temperaturkoeffizient von peak Temperature coefficient of peak IF = 10 mA; -10C T 100C (typ.) TCpeak 0.04 0.04 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 10 mA; -10C T 100C (typ.) TCdom 0.03 0.04 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 10 mA; -10C T 100C (typ.) TCV - 4.5 - 3.6 mV/K Optischer Wirkungsgrad Optical efficiency IF = 10 mA (typ.) opt 2 8 lm/W * Einzelgruppen siehe Seite 5 Individual groups on page 5 2008-06-05 5 LB T673, LT T673 Wellenlangengruppen (Dominantwellenlange)5) Seite 17 Wavelength Groups (Dominant Wavelength)5) page 17 Gruppe Group blue min. true green max. 2 Einheit Unit min. max. 517 523 nm 3 465 469 523 529 nm 4 469 473 529 535 nm 5 473 477 535 541 nm Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group K1 K2 L1 L2 M1 M2 N1 N2 P1 P2 Q1 Q2 R1 R2 S1 Anm.: Note: Lichtstarke1) Seite 17 Luminous Intensity1) page 17 IV (mcd) 7.1 ... 9.0 ... 11.2 ... 14.0 ... 18.0 ... 22.4 ... 28.0 ... 35.5 ... 45.0 ... 56.0 ... 71.0 ... 90.0 ... 112.0 ... 140.0 ... 180.0 ... 9.0 11.2 14.0 18.0 22.4 28.0 35.5 45.0 56.0 71.0 90.0 112.0 140.0 180.0 224.0 Lichtstrom2) Seite 17 Luminous Flux2) page 17 V (mlm) 24 (typ.) 30 (typ.) 40 (typ.) 50 (typ.) 60 (typ.) 75 (typ.) 95 (typ.) 120 (typ.) 150 (typ.) 190 (typ.) 240 (typ.) 300 (typ.) 380 (typ.) 480 (typ.) 600 (typ.) Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus nur 4 bzw. 6 bzw. 8 Helligkeitsgruppen bestehen. Einzelne Helligkeitsgruppen konnen nicht bestellt werden. The standard shipping format for serial types includes either a lower familiy group, an upper family group or a grouping of all individual groups of 4 or 6 or 8 individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: S1-3 Example: S1-3 Helligkeitsgruppe Brightness Group Wellenlange Wavelength S1 3 Anm.: Note: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. No packing unit / tape ever contains more than one group for each selection. 2008-06-05 6 LB T673, LT T673 Relative spektrale Emission2) Seite 17 Relative Spectral Emission2) page 17 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TA = 25 C; IF = 10 mA OHL00478 100 I rel % 80 V 60 blue true green 40 20 0 400 450 500 550 650 600 nm 700 Abstrahlcharakteristik2) Seite 17 Radiation Characteristic2) page 17 Irel = f (); TA = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2008-06-05 0.8 0.6 0.4 0 20 7 40 60 80 100 120 LB T673, LT T673 Durchlassstrom2) Seite 17 Forward Current2) page 17 IF = f (VF); TA = 25 C Relative Lichtstarke2) 7) Seite 17 Relative Luminous Intensity2) 7) page 17 IV/IV(10 mA) = f (IF); TA = 25 C OHL00485 102 mA IF 5 IV OHL10494 10 1 IV (10 mA) 5 101 5 10 0 blue true green 5 100 5 10-1 2.0 2.5 3.0 3.5 4.0 10 -1 0 10 4.5 V 5.0 5 10 1 mA 10 2 IF VF Relative Lichtstarke2) Seite 17 Relative Luminous Intensity2) page 17 IV/IV(25 C) = f (Tj); IF = 10 mA Relative Vorwartsspannung2) Seite 17 Relative Forward Voltage2) page 17 VF = VF - VF(25 C) = f (Tj); IF = 10 mA (blue) OHL02352 0.4 V VF IV I V (25 C) 0.3 1.2 0.2 1.0 0.1 0.8 true green blue 0.0 0.6 -0.1 0.4 -0.2 0.2 -0.3 -60 -40 -20 0 20 40 60 0 -60 -40 -20 0 C 100 Tj 2008-06-05 OHL13637 1.4 20 40 60 C 100 Tj 8 LB T673, LT T673 Dominante Wellenlange2) Seite 17 Dominant Wavelength2) page 17 LB; dom = f (IF); TA = 25 C Dominante Wellenlange2) Seite 17 Dominant Wavelength2) page 17 LT; dom = f (IF); TA = 25 C OHL10503 474 nm OHL02365 550 nm dom dom 473 540 472 535 471 530 blue 470 true green 525 469 520 468 467 515 0 20 40 60 80 510 mA 120 0 20 40 60 80 mA 120 If If Maximal zulassiger Durchlassstrom Max. Permissible Forward Current I F = f ( T) Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (T) OHL01847 25 mA IF OHL01846 25 mA IF 20 blue true green 15 20 blue true green 15 10 10 5 5 TA temp. ambient 0 0 20 40 60 TS temp. solder point 0 80 C 100 T 2008-06-05 0 20 40 60 80 C 100 T 9 LB T673, LT T673 Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C LB 0.25 IF A Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C LB OHL01965 t 0.25 IF A tP IF D = TP T OHL01966 t 0.10 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp Zulassige Impulsbelastbarkeit IF = f (tp) Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C LT Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C LT OHL01967 t D = TP 0.30 IF A tP IF T 0.20 0.10 0.05 t D = TP IF T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.15 0.10 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2008-06-05 OHL01968 tP 0.20 D= 0.15 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.15 0.05 0.30 IF A T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.10 IF D = TP D= 0.15 tP tp 10 LB T673, LT T673 Mazeichnung8) Seite 17 Package Outlines8) page 17 2.1 (0.083) 3.0 (0.118) 2.6 (0.102) 2.3 (0.091) 1.7 (0.067) 0.1 (0.004) (typ.) 0.9 (0.035) 0.7 (0.028) 3.4 (0.134) 3.0 (0.118) (2.4) (0.095) 3.7 (0.146) 3.3 (0.130) 41 2.1 (0.083) A Cathode marking 0.5 (0.020) 1.1 (0.043) C 0.18 (0.007) 0.12 (0.005) 0.6 (0.024) 0.4 (0.016) GPLY6724 Kathodenkennung: Cathode mark: Gewicht / Approx. weight: abgeschragte Ecke bevelled edge 35 mg Gurtung / Polaritat und Lage8) Seite 17 Verpackungseinheit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm Method of Taping / Polarity and Orientation8) page 17 Packing unit 2000/reel, o180 mm or 8000/reel, o330 mm 2.9 (0.114) 4 (0.157) 2008-06-05 11 8 (0.315) Cathode/Collector Marking 1.75 (0.069) 2 (0.079) 3.5 (0.138) 4 (0.157) 3.6 (0.142) 1.5 (0.059) OHAY2271 LB T673, LT T673 Empfohlenes Lotpaddesign8) 9) Seite 17 Recommended Solder Pad8) 9) page 17 IR Reflow Loten IR Reflow Soldering 2.6 (0.102) 4.5 (0.177) 1.5 (0.059) 1.5 (0.059) 4.5 (0.177) 2.6 (0.102) Padgeometrie fur verbesserte Warmeableitung Lotstopplack Solder resist Paddesign for improved heat dissipation Cu-Flache > 16 mm 2 Cu-area > 16 mm 2 OHLPY970 Empfohlenes Lotpaddesign verwendbar fur TOPLED(R) und Power TOPLED(R) IR Reflow Loten8) Seite 17 Recommended Solder Pad useable for TOPLED(R) and Power TOPLED(R) IR Reflow Soldering8) page 17 Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Padgeometrie fur verbesserte Warmeableitung 3.3 (0.130) Paddesign for improved heat dissipation 3.3 (0.130) Anode 2.3 (0.091) 11.1 (0.437) 1.5 (0.059) 1.1 (0.043) 3.7 (0.146) 0.8 (0.031) 0.7 (0.028) Kathode/ Cathode Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Lotstoplack Solder resist 2008-06-05 12 Cu Flache / <_ 16 mm 2 per pad Cu-area OHLPY440 LB T673, LT T673 Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 IR-Reflow Lotprofil fur bleifreies Loten IR Reflow Soldering Profile for lead free soldering (nach J-STD-020B) (acc. to J-STD-020B) OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C 255 C 240 C T 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 min. condition for IR Reflow Soldering: solder point temperature 235 C for at least 10 sec. Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 s 300 t Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2008-06-05 13 s 250 LB T673, LT T673 Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Lx xxxx Bin1: Bin Information Color 1 Bin2: Product Name Bin3: pl e Semiconductors RoHS Compliant ML Temp ST 2 260 C RT (6P) BATCH NO: Batch Number Bar Code Additional TEXT (9D) D/C: Date Code Sa m (1T) LOT NO: Lot Number R077 Bar Code (X) PROD NO: Product Code (Q)QTY: Product Quantity per Reel DEMY PACKVAR: Packing Type (G) GROUP: X - X - X Bar Code Forward Voltage Group Wavelength Group Brightness Group OHA12043 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm 400 mm Leader: Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W 8 + 0.3 - 0.1 P0 P1 P2 D0 E F 4 0.1 4 0.1 2 0.05 1.5 + 0.1 1.75 0.1 3.5 0.05 (0.157 0.004) (0.157 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.138 0.002) Reel dimensions in mm (inch) A W Nmin W1 W2 max 180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 330 (13) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 2008-06-05 14 LB T673, LT T673 Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print Barcode label L VE el LE see . lab e H) nk, bla cod (R If y bar . dit RH mi % hu e /60 ve ed ag C ati rar ck rel 30 RS _ < inf pa % ins VE of to ak ITI TO 90 urs nta d ). < ns (pe or urs d co NSUC Ho de , cte itio urs g SEND Ho an bje ing co C 72 nd Ho urs 5 ba E CO te 48 C su ss e Ho co is UR ce 24 6 da e y MI 40 be tim h C e ThISTSE l pro < tor tim or ). 23 tim e at t wilntC or l wit fac MO Flo tim TO s at or ca at re. Flo d tha ale el or nth OP nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic is be or de 24 tin en l 5a6 pro ve Le de , e te co , g: ve l un wh Le ke r se da ure ba ed low ba Le ve mo % ba e al d ure Le ist en ref e e 10 tim ure se for ist ale op se for > Mo , se 3 ist ure is or . , is ha se Mo nk be ist nk rd g -03 Mo in Flo RH g, r-p bla Mo ba TD po If bla hin % kin Ca life s (if ar t. s wit 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. e 4 8 ref dy red reqy is 2. bo e Mo /JE tim dit2b 16 req : e a) Sto es tim or mi IPC ed or g is tim e vic b) or e Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e l 1 2 Flo If al ref tim ve l 4. se d l 2a3 ve Le g an ve l Le Ba te ure Le ve ure Le ist Da ure ist Mo ist ure Mo ist Mo Mo O S R A M N TIO U A C Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM Desiccant OSR OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials P -1 +Q -1 D/ C: (9 D) 20 00 (Q )Q TY : ic S R NO : O em S BA TC H (6 P) LO T (1 T) NO : (X ) PR OD 5 14 2 110 0 M DE -1 18 (G ) GR OU P: P -1 +Q R u L lt S iT Y O T67 P L 6 8 01 C: 99 D/ TY : O SR AM 20 00 21 D) 00 (9 21 : 34 )Q (Q ic 5 S NO O 12 H em H S TC (X ) PR OD NO : (1 T) 11 00 LO T 14 2 NO (6 P) : 12 BA 3G R A on M du O p ct to or s 44 M 2100 Y E Bi D Bi n1 Bi n2 : Pn3 : Q- 1: 1- 20 M 20 2 L Te 2a 22 m 3 24 0 p ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: MO TO OP Muster 01 44 8 2199 A on M du O p ct to or s . RH % /60 C R 18 T6 P 76 LE . H) (R e 3G H 12 34 y dit mi ag NO : 12 nk, bla cod bar d GR OU P: M ul LS ti Y TO el see lab e If hu ive _ < s ur s ). ur s Ho de ur s Ho co 72 Ho ur te 48 e Ho 24 6 da e tim e th tim or ). 23 tim e at t wi ntC or l wi fac Flo tim s at or e. ca at Flo tha ale el or ur nth nti Flo uiv if: read es ed l 4 5 Flo lab mo ide eq low g, l oc ve vic is be or de 24 tin en l 5a6 pr ve Le de e te co , w, g: ve l un wh e Le ke r se da ur e ba ed flo Le ve mo % ba e ba al d ur e Le ist en re e 10 e tim ur e se for ist ale op se for > , Mo se ist ur is or . , is ha 33 se Mo nk be ist nk rd g -0 Mo in n Flo r-p RH g, bla Mo ba TD po If blathi % kin Ca life s (if ar t. wi 10 ba tor J-S thi va p. elf Ye ar ks s _ < me 1 Ye ee ur d, C ire icat Sh ter w, tem ted at > 1 W flo un Ho Af qu Indno ire DE 1. e 4 8 re dy ed re y is qu JE 2. bo e Mo or tim 16 re C/ : e es dit2b a) St tim or mi ed or g is IP tim e vic b) or Hu Flo en tim or De 2a kin ce te Flo a) op or 3. b) ba en Flo da e fer l 1 2 Flo If al re tim ve l 4. se d l 2a3 ve Le g an ve l e Le Ba te ur e Le ve ur e Le ist Da ur e ist Mo ist ur Mo ist Mo Mo (G ) Muster L VE LE re lat ra ck re 30 N s IVE RS inf pa % k ainIT TO of to 90 ea d ntNSUC < ns (p TIO or d , cteg itio U g coSEND an bje C sin nd 5 C su es CO Ais baRE co y 40 be oc TU MI CThIS C < tor ll pr SE DE MY Barcode label D Bi Bin1 Bi n2 : Pn3 : Q- 1ML : 1- 20 20 2 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: Barcode label Packing Sealing label 2008-06-05 15 OHA02044 LB T673, LT T673 Revision History: 2008-06-05 Previous Version: 2007-08-09 Page Subjects (major changes since last revision) Date of change 5 Forward voltage 2006-04-04 7 Forward Current 2006-04-04 2 Ordering Code 2006-07-06 2, 5, 6 OS-PCN-2006-024-A 2006-10-16 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components10) page 17 may only be used in life-support devices or systems11) page 17 with the express written approval of OSRAM OS. 2008-06-05 16 LB T673, LT T673 Funoten: 1) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 3) Die LED kann kurzzeitig in Sperrichtung betrieben werden. 4) Montage auf PC-Board FR 4 (Padgroe 16 mm 2) 5) Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. 6) Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. 7) Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. 8) Mae werden wie folgt angegeben: mm (inch) 9) Gehause halt TTW-Lothitze aus nach CECC 00802 Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 10) 10) 11) 2) 3) 4) 5) 6) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 8) Dimensions are specified as follows: mm (inch). Package able to withstand TTW-soldering heat acc. to CECC 00802 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 11) Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2008-06-05 7) 9) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 17 Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Driving the LED in reverse direction is suitable for short term application. Mounted on PC board FR 4 (pad size 16 mm 2) Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.