Schottky Barrier Rectifier MBRF10100CTL, 2x 5A, 100V, ITO-220AB, Common Cathode MBRF10100CTL RoHS Pb Description Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. Features * H igh junction temperature capability Pin out Heat sink mon de * H igh frequency operation * C ommon cathode configuration in electrically isolated ITO220AB package * G uard ring for enhanced ruggedness and long term reliability Common Cathode * Low forward voltage drop 3 node K de 1 2 3 1 Anode Common Anode Cathode 2 Pinout 2 TO-220AB Common Cathode * Polarity protection diodes Pinout 3 ITO-220AB Common Cathode Parameters Symbol Test Conditions Max Unit V VRWM - 100 Average Forward Current IF(AV) 50% duty cycle @TC = 135C, rectangular wave form 5 (per leg) 10 (total device) Peak One Cycle Non-Repetitive Surge leg) CathodeCurrent (per Anode IFSM 8.3 ms, half Sine pulse 120 Cathode e * DC/DC converters * Free-wheeling diodes Heat sink Peak Inverse Voltage 3 * S witching mode power supply Anode Common Anode Cathode Maximum Ratings Cathode Applications 3 A A 1 2 Electrical Characteristics Pinout 5 TO-220AC Parameters Symbol VF1 Forward Voltage Drop (per leg) * VF2 Test Conditions Max @ 3A, Pulse, TJ = 25 C 0.78 @ 5A, Pulse, TJ = 25 C 0.85 @ 3A, Pulse, TJ = 125 C 0.65 @ 5A, Pulse, TJ = 125 C 0.75 IR1 @VR = rated VR TJ = 25 C 1 IR2 @VR = rated VR TJ = 125 C 15 CT @VR = 5V, TC = 25 C fSIG = 1MHz 300 Typical Series Inductance (per leg) LS Measured lead to lead 5 mm from package body Voltage Rate of Change dv/dt Reverse Current (per leg) * Junction Capacitance (per leg) RSM Isolation Voltage (t = 1.0 second, R. H. < =30%, TA = 25 C) VISO Unit V mA pF 8.0 nH 10,000 V/s Clip mounting, the epoxy body away from the heatsink edge by more than 0.110" along the lead direction. 4500 Clip mounting, the epoxy body is inside the heatsink. 3500 Screw mounting, the epoxy body is inside the heatsink. 1500 V * Pulse Width < 300s, Duty Cycle <2% (c)2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15 Schottky Barrier Rectifier MBRF10100CTL, 2x 5A, 100V, ITO-220AB, Common Cathode Thermal-Mechanical Specifications Parameters Symbol Max Unit Junction Temperature TJ -55 to +150 C -55 to +150 C 4.5 C/W 2 g Storage Temperature Tstg Maximum Thermal Resistance Junction to Case RthJC Approximate Weight wt Case Style Test Conditions DC operation ITO-220AB Figure 1: Typical Forward Characteristics Figure 2: Typical Reverse Characteristics C C C C Figure 3: Typical Junction Capacitance C (c)2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15 Schottky Barrier Rectifier MBRF10100CTL, 2x 5A, 100V, ITO-220AB, Common Cathode Dimensions- ITO-220AB Symbol Millimeters Min Typ Max A 4.30 4.50 4.70 A1 1.10 1.30 1.50 A2 2.80 3.00 3.20 A3 2.50 2.70 2.90 b 0.50 0.60 0.75 b1 1.10 1.20 1.35 b2 1.50 1.60 1.75 b3 1.20 1.30 1.45 b4 1.60 1.70 1.85 c 0.55 0.60 0.75 D 14.80 15.00 15.20 E 9.96 10.16 10.36 2.55 e 5.10 e1 H1 6.50 6.70 6.90 L 12.70 13.20 13.70 2.00 L1 1.60 1.80 L2 0.80 1.00 1.20 L3 0.60 0.80 1.00 oP1 oP2 3.30 3.50 3.70 2.99 3.19 3.39 Q 2.50 2.70 2.90 1 2 3 4 5 Packing Options 5 4 10 5 5 Part Numbering and Marking System Part Number Marking Packing Mode M.O.Q MBRF10100CTL MBRF10100CTL 50pcs / Tube 1000 Tube Specification MBRF10100CTL 6 7mm LF YYWWL MBR F 10 100 CTL LF YY WW L = Device Type = Package type = Forward Current (10A) = Reverse Voltage (100V) = Configuration = Littelfuse = Year = Week = Lot Number 530mm 32mm (c)2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15