SPECIFICATION * Supplier :Samsung electro-mechanics * Product : Tantalum capacitor * Samsung P/N : TCSCS1A106MPAR * User Part No : * Description : CAP,TANTAL,10,10V,20%,2012-12 * Last Revision Date :December.28.2009 * Date :November 16. 2009 1. Samsung Part Number TC SCS Tantalum Capacitor Series Rated Voltage Capacitance Capacitance tolerance 1A 106 M P A R TC SCS 10V 10 20% Case size code 2012-12 Packing code 7" reel L: 2.0 0.2 mm W: 1.25 0.2 mm H: 1.2 mm Max 2. Reliability Test and Judgment Condition 2 Item Capacitance Tan (DF) Impedance(Z) & ESR Performance Within specified tolerance Within specified value Within specified value Leakage current Within specified value Temperature Characteristics "-55 : C/C -25~0% "+85 : C/C 0~20% "+125 : C/C 0~20% No peeling shall be occur on the terminal electrode Within specified tolerance Tan , LC : initial spec. More than 95% of terminal surface is to be soldered newly Adhesion Strength Electrode Strength Solder ability Resistance to Soldering heat Vibration Test Moisture Resistance High Temperature Resistance Temperature Cycling Test condition 120, maximum 1.0Vrms, maximum 1.5Volt D.C, at 25 120, maximum 1.0Vrms, maximum 1.5Volt D.C, at 25 100k, maximum 1.0Vrms, maximum 1.5Volt D.C, at 25 The rated DC voltage shall be applied to terminals across the test capacitor charge Time: 5 min. Capacitance change : within 30% Tan :150% or less specified initial value LC : 200% or less specified initial value Capacitance change : within 15% Tan , LC : initial spec. (From -55 to 125, 1005mm size : 2N, for 101 sec. 1608~7343mm size : 5N, for 101 sec. Bending to the limit (3mm) with 1.0mm/sec. SnAg3.0Cu0.5 solder :245+/5, 30.3sec (preheating : 80~120 for 10~30sec.) Solder pot : 2605, 101sec. Amplitude : 1.5mm From 10Hz to 55Hz (return : 1min.) 2hours 3 direction (x, y, z) Capacitance change : within 30% Tan :150% or less specified initial value LC : 200% or less specified initial value Capacitance change : within 30% Tan :150% or less specified initial value LC : 125% or less specified initial value Capacitance change : within 30% With the rated voltage Max. operating temperature 2000/-0hrs 1 cycle condition Tan :150% or less specified initial value (Min. operating temperature 25 LC : 200% or less specified initial value 402, 90~95%RH, 500+8/-0hrs Max. operating temperature 25) 5 cycle test 3. Recommended Soldering method Reflow ( Reflow Peak Temperature : 2605, 10sec. Max ) With Pb-free products, if used under 235,the quality confirmation must be needed. 4.Ratings & Part Number Reference Part Number Capacitance Leakage Current TCSCS1A106MPAR 10 1 DF % 8% ESR 6