SPECIFICATION
• Last Revision Date :December.28.2009 • Supplier :Samsung electro-mechanics
• Date :November 16. 2009 • Product : Tantalum capacitor
• Samsung P/N : TCSCS1A106MPAR
• User Part No :
• Description : CAP,TANTAL,10㎌,10V,±20%,2012-12
1. Samsung Part Number
TC SCS 1A 106 M P A R
①② ③④⑤⑥⑦⑧
①Tantalum Capacitor TC
②Series SCS
③Rated Voltage 10V
④Capacitance 10㎌
⑤Capacitance ±20%
tolerance
⑥Case size code 2012-12 L: 2.0 ± 0.2 mm W: 1.25 ± 0.2 mm H: 1.2 mm Max
⑦Packing code
2. Reliability Test and Judgment Condition 2
Item Performance Test condition
Capacitance Within specified tolerance 120㎐, maximum 1.0Vrms, maximum 1.5Volt D.C, at 25 ℃
Tan δ (DF) Within specified value 120㎐, maximum 1.0Vrms, maximum 1.5Volt D.C, at 25 ℃
Impedance(Z) & ESR Within specified value 100k㎐, maximum 1.0Vrms, maximum 1.5Volt D.C, at 25 ℃
Leakage current
Temperature
Characteristics "+85℃ : △C/C 0~20% (From -55℃ to 125℃,
"+125℃ : △C/C 0~20%
Adhesion Strength No peeling shall be occur 1005mm size : 2N, for 10±1 sec.
on the terminal electrode 1608~7343mm size : 5N, for 10±1 sec.
Electrode Strength Within specified tolerance Bending to the limit (3mm)
Tan δ, LC : initial spec. with 1.0mm/sec.
Solder ability More than 95% of terminal surface is SnAg3.0Cu0.5 solder
to be soldered newly :245+/5℃, 3±0.3sec
(preheating : 80~120℃ for 10~30sec.)
Resistance to Capacitance change : within ±30% Solder pot : 260±5℃, 10±1sec.
Soldering heat Tan :150% or less specified initial value
LC : 200% or less specified initial value
Vibration Test Capacitance change : within ±15% Amplitude : 1.5mm
Tan δ, LC : initial spec. From 10Hz to 55Hz (return : 1min.)
2hours ´ 3 direction (x, y, z)
Moisture Resistance Capacitance change : within ±30%
Tan :150% or less specified initial value 40±2℃, 90~95%RH, 500+8/-0hrs
LC : 200% or less specified initial value
High Temperature Capacitance change : within ±30% With the rated voltage
Resistance Tan :150% or less specified initial value Max. operating temperature
LC : 125% or less specified initial value 2000/-0hrs
Temperature Cycling Capacitance change : within ±30% 1 cycle condition
Tan :150% or less specified initial value (Min. operating temperature → 25℃
LC : 200% or less specified initial value → Max. operating temperature → 25℃)
5 cycle test
3. Recommended Soldering method
Reflow ( Reflow Peak Temperature : 260±5℃, 10sec. Max )
With Pb-free products, if used under 235℃,the quality confirmation must be needed.
4.Ratings & Part Number Reference
7" reel
"-55℃ : △C/C -25~0%
Within specified value The rated DC voltage shall be applied to terminals across
the test capacitor
charge Time: 5 min.
ESR Ω
TCSCS1A106MPAR 8% 6Ω10㎌1㎂
Part Number Capacitance Leakage Current DF %
