PL IA NT CO M *R oH S Features Applications Available in E6 series Input/output of DC/DC converters Low profile of only 5.0 mm Power supplies for: * Portable communications equipment * Camcorders * LCD TVs * Car radios Inductance as low as 0.68 H RoHS compliant* SDR1005 Series - SMD Power Inductors Inductance 1kHz Bourns Part No. (H) SDR1005-R68ML 0.68 SDR1005-1R0ML 1 SDR1005-1R5ML 1.5 SDR1005-2R2ML 2.2 SDR1005-2R5ML 2.5 SDR1005-3R3ML 3.3 SDR1005-4R7ML 4.7 SDR1005-6R8ML 6.8 SDR1005-100ML 10 SDR1005-150ML 15 SDR1005-220ML 22 SDR1005-330KL 33 SDR1005-470KL 47 SDR1005-680KL 68 SDR1005-101KL 100 SDR1005-151KL 150 SDR1005-221KL 220 SDR1005-331KL 330 SDR1005-471KL 470 SDR1005-681KL 680 SDR1005-102KL 1000 SDR1005-152KL 1500 SDR1005-222KL 2200 SDR1005-332KL 3300 SDR1005-472KL 4700 SDR1005-682KL 6800 SDR1005-822KL 8200 SDR1005-103KL 10000 Tol. % 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Q Ref. Test Frequency Q (MHz) SRF Min. (MHz) RDC Max. () I rms Max. (A) I sat Typ. (A) 26 55 50 51 49 45 46 56 43 42 29 29 30 24 41 58 50 56 60 72 78 97 85 106 96 105 102 102 7.960 2.600 3.000 2.470 3.000 2.520 2.700 2.000 4.000 2.700 2.520 2.200 2.200 2.200 0.056 0.087 0.068 0.070 0.081 0.096 0.122 0.131 0.128 0.128 0.125 0.171 0.145 0.138 160 137 95 65 56 54 42 31 26 22 18 14 12 11 8 6 5 4 4 3 2 2 2 1 1 1 1 1 0.006 0.007 0.009 0.012 0.012 0.015 0.019 0.030 0.050 0.060 0.10 0.12 0.19 0.24 0.33 0.59 0.78 1.15 1.70 2.60 3.90 6.30 8.20 14.00 17.00 30.00 34.00 39.00 8.50 7.50 6.50 6.10 5.50 5.00 4.50 3.40 2.90 2.50 2.00 1.80 1.40 1.20 1.00 0.80 0.70 0.55 0.45 0.35 0.30 0.25 0.20 0.16 0.15 0.11 0.11 0.10 9.50 9.00 8.00 7.00 7.00 6.40 5.40 4.50 3.70 3.00 2.50 2.00 1.60 1.40 1.20 1.00 0.80 0.60 0.50 0.40 0.35 0.30 0.24 0.18 0.16 0.12 0.12 0.11 General Specifications Test Voltage .....................0.1 V, 100 KHz Reflow soldering.....250 C; 10 sec max. (In compliance with JEDEC, J-STD-020C, Table 4-2) Operating Temperature ..-40 C to +125 C (Temperature rise included) Storage Temperature..-40 C to +125 C Resistance to Soldering Heat ............................250 C, 10 sec. max. Materials Core.........................................Ferrite DR Wire .............................Enameled copper Base .................................................DAP Terminal .........................................Cu/Sn Rated Current ...................Ind. drop 10 % typ. at Isat Temperature Rise ..................15 C max. at rated Irms Packaging.....................600 pcs. per reel Product Dimensions 101 Electrical Specifications 10.0 0.2 (.393 .008) 12.7 0.2 (.500 .008) 5.0 0.3 MAX. (.197 .012) 7.6 0.3 TYP. (.299 .012) Electrical Schematic 2.4 0.2 TYP. (.094 .008) 2.5 0.2 TYP. (.098 .008) DIMENSIONS: MM (INCHES) * = START OF WINDING Recommended Layout 2.8 (.110) 7.3 (.287) 3.0 (.118) *RoHS Directive 2002/95/EC Jan 27, 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SDR1005 Series - SMD Power Inductor Soldering Profile 300 <1> Max. of 10 seconds at 250 C <2> Max. of 30 seconds > 220 C 250 C 250 <1> <2> Temperature (C) 200 150 120 - 150 seconds 100 Ramp-down 5 C/second maximum 50 Ramp-up 4 /second maximum 0 0 50 100 150 200 250 300 Time (seconds) Packaging Specifications 2.0 0.5 (.079 .020) 330 (12.99) DIA. 30.4 (1.20) THICKNESS 0.10 (.004) MAX. 13.0 0.5 (.512 .020) DIA. 21.0 0.8 (.827 .031) EMBOSSED CAVITY 50.0 (1.969) 13.0 0.5 DIA. (.512 .020) EMBOSSED CARRIER 26 (1.02) 0.4 0.05 (.016 .002) 13.2 0.1 (.520 .004) 11.5 0.1 (.453 .004) 1.55 0.05 DIA. (.061 .002) 4.0 0.1 (.157 0.04) END 24.0 0.3 (.945 .012) 101 101 101 16.0 0.1 (.630 .004) 1.5 MIN. (.059) 4.4 0.1 (.173 .004) 5.3 0.1 (.153 .004) 10.4 0.1 (.409 .004) START NO COMPONENT COMPONENTS NO COMPONENT 200 (7.874) 11200 (440.945) 400 (15.748) DIMENSIONS: MM (INCHES) USER DIRECTION OF FEED QTY: 600 PCS. PER REEL REV. 09/10 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.