VWO 40 Three Phase AC Controller Modules IRMS = 40 A VRRM = 800-1600 V Preliminary data 7 VRSM VDSM VRRM VDRM V V 800 1200 1400 1600 800 1200 1400 1600 14 1 Type VWO 40-08io7 VWO 40-12io7 VWO 40-14io7 VWO 40-16io7 16 2 7 10 17 3 8 11 8 1 2 9 13 3 14 9 16 17 10 11 13 Symbol Test Conditions Maximum Ratings IRMS ITRMS ITAVM TC = 85C, 50 - 400 Hz (per phase) TVJ = TVJM TC = 85C; (180 sine) ITSM TVJ = 45C; VR = 0 Features Thyristor controller for AC (circuit W3C acc. to IEC) for mains frequency Package with metal base plate Isolation voltage 3000 V~ Planar passivated chips UL applied I2t (di/dt)cr 40 29 18 A A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 400 450 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 360 390 A A TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 800 850 A2s A2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 650 640 A2s A2s TVJ = TVJM repetitive, IT = 150 A f =50 Hz, tP =200 ms VD = 2/3 VDRM IG = 0.3 A non repetitive, IT = ITAVM diG/dt = 0.3 A/ms 100 A/ms 500 A/ms (dv/dt)cr TVJ = TVJM; VDR = 2/3 VDRM RGK = ; method 1 (linear voltage rise) PGM TVJ = TVJM IT = ITAVM 1000 V/ms PGAVM W W W VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 C C C 2500 3000 V~ V~ Md Mounting torque (M5) Terminal connection torque (M3; M5) Weight typ. Applications Switching and control of three phase AC circuits Softstart AC motor controller Solid state switches Light and temperature control Advantages Easy to mount with two screws Space and weight savings Improved temperature and power cycling High power density 10 5 0.5 50/60 Hz, RMS IISOL 1 mA tp = 30 ms tp = 300 ms VISOL t = 1 min t=1s 5/4415 % Nm/lb.in. 1.5/1315 % Nm/lb.in. 180 g Data according to IEC 60747 refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions (c) 2000 IXYS All rights reserved 1-2 VWO 40 Symbol Test Conditions Characteristic Values ID, IR TVJ = TVJM; VR = VRRM; VD = VDRM 5 VT IT 1.65 V VT0 rT For power-loss calculations only 0.85 15 V mW VGT VD = 6 V; IGT VD = 6 V; VGD IGD TVJ = TVJM; IL = 80 A; TVJ = 25C mA TVJ = 25C TVJ = -40C TVJ = 25C TVJ = -40C 1.0 1.6 100 150 V V mA mA VD = 2/3 VDRM 0.2 5 V mA TVJ = 25C; tP = 10 ms IG = 0.3 A; diG/dt = 0.3 A/ms 200 mA IH TVJ = 25C; VD = 6 V; RGK = 150 mA tgd TVJ = 25C; VD = 1/2 VDRM IG = 0.3 A; diG/dt = 0.3 A/ms 2 ms tq TVJ = TVJM; IT = 20 A, tP = 200 ms; di/dt = -10 A/ms VR = 100 V; dv/dt = 15 V/ms; VD = 2/3 VDRM typ. 150 ms RthJC per per per per RthJK dS dA a thyristor; sine 180el module thyristor; sine 180el module Creeping distance on surface Creepage distance in air Max. allowable acceleration 1.43 0.238 1.53 0.255 K/W K/W K/W K/W 8.0 4.5 50 mm mm m/s2 Dimensions in mm (1 mm = 0.0394") (c) 2000 IXYS All rights reserved 2-2