Standard Product Reference Sheet VCEW1151CDS-3BZH3-TR Features Package Product features Higher reliability with using silicone resin Outer dimension: 1.6 x 0.8 x 0.7mm ( L x W x H ) Equivalent to JEDEC Level 2a Corresponds to demand of "Corporate Color" Consideration of IF derating is unnecessary until 85 Lead-free soldering compatible RoHS compliant Recommended Applications Light source for interior for Automotive, various indicator etc. 2016.12.9 Page : 1 Outline Dimensions VCEW1151CDS-3BZH3-TR Unit Weight Tolerance No. Item Material Qty. LED Die InGaN 1 Mold Resin Silicone Resin 1 PCB Glass fabrics 1 Electrode Copper (Au Plating) 2 mm 1.4mg 0.1 Recommended soldering Pattern Unitmm 2016.12.9 Page : 2 Specifications VCEW1151CDS-3BZH3-TR Product Overview DIE MATERIAL InGaN EMITTING COLOR WHITE RESIN COLOR EMITTING AREA DIFFUSED PALE YELLOW Absolute Maximum Ratings (Ta=25) ITEM SYMBOL MAXIMUM RATINGS UNITS Power Dissipation Pd 74 mW Forward Current IF 20 mA Repetitive Peak Forward Current "1ms,1/10duty" IFRM 100 mA IF Derate Linearly from "85" IF 0.8 mA/ IFRM Derate Linearly from "85" IFRM 4.0 mA/ Reverse Voltage VR 5 V Operating Temperature Topr -40 +100 Storage Temperature Tstg -40 +110 Electrostatic Discharge Threshold "HBM" ESD 1,000 V Notes1 Soldering Temperature "Reflow Soldering" Tsld 260 Notes2 Junction Temperature Tj 110 Notes1 ESD testing method : EIAJ4701/300(304) Human Body Model(HBM) 1.5k,100pF Notes2 Please refer to the attached sheets page 9, Soldering Conditions. Thermal Characteristics (Ta=25) ITEM SYMBOL TYP. UNITS Thermal resistance Junction - Ambient Rth(j-a) 450 /W Thermal resistance Junction - solder point Rth(j-s) 300 /W Notes3 Notes3 Rth(j-a) Measurement condition SubstrateFR4 ( t=1.6mm ) Pattern size16mm2 2016.12.9 Page : 3 Specifications VCEW1151CDS-3BZH3-TR Electro-Optical Characteristics (Ta=25) ITEM SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Forward Voltage VF IF = 10mA 2.8 3.1 3.5 V Reverse Current IR VR = 5V - - 10 A Luminous Intensity IV IF = 10mA 82 120 150 mcd Luminous Flux V IF = 10mA - 700 - mlm - 0.281 - - 0.263 - - 160 - deg. - 168 - deg. Chromaticity Coordinates IF = 10mA x Half Intensity Angle Notes4 Notes5 Notes6 IF = 10mA y Notes7 Notes4 Tolerance:0.1V Notes5, 6 Please refer to the attached sheets, each sorting chart. Notes6 Chromaticity coordinates ; x and y according to CIE1931 Notes7 Viewing Angle at 50% Iv, x ; Housing long side axis, y ; Housing short side axis x y 2016.12.9 Page : 4 Specifications VCEW1151CDS-3BZH3-TR Sorting chart for Luminous intensity IV LEDs shall be sorted out into the following chart and each rank parts shall be packed separately when shipping. Luminous intensity IV (mcd) Min. Max. Rank BZ 82 100 C1 100 120 C2 120 150 Condition IF = 10mA Ta=25 Notes : Luminous intensity Tolerance each Rank: 10% Sorting Chart for Chromaticity Coordinates, x,y LEDs shall be sorted out into the following chart and each rank parts shall be packed separately when shipping. 0.90 0.30 0.80 0.70 0.28 0.60 4D y y 0.50 0.26 3D 0.40 0.30 0.24 0.20 0.10 0.22 0.00 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.24 0.26 0.28 0.30 0.32 x x (IF=10mA, Ta=25) Left Down Rank Left Upper Right Upper Right Down x y x y x y x y 3D 0.262 0.250 0.274 0.268 0.288 0.258 0.276 0.241 4D 0.274 0.268 0.286 0.285 0.300 0.276 0.288 0.258 Notes 2016.12.9 Chromaticity coordinates tlerance Each rank 0.01 Page : 5 Technical Data VCEW1151CDS-3BZH3-TR Relative Intensity vs. wavelength Condition: Ta = 25, IF =10mA 1.2 Relative Intensity 1.0 0.8 0.6 0.4 0.2 0.0 380 430 480 530 580 630 680 730 780 Wavelength (nm) Spatial Distribution Condition: Ta = 25, IF=10mA x direction y direction Relative Intensity (%) 2016.12.9 Page : 6 Technical Data VCEW1151CDS-3BZH3-TR Forward Voltage vs. Ambient Temp. Forward Current vs. Forward Voltage Condition : IF = 120mA Condition: Ta = 25 3.8 100 20mA 3.6 60 25 0 -20 100 Forward Voltage : VF (V) Forward Current IF (mA) 85 -40 10 15mA 10mA 3.4 3.2 3.0 2.8 2.6 5mA 2mA 2.4 1mA 2.2 1 2.4 2.6 2.8 3.0 3.2 3.4 3.6 -40 3.8 -20 0 20 40 60 80 Forward Voltage VF (V) Ambient Temperature : Ta () Relative Intensity vs. Forward Current Relative Intensity vs. Ambient Temp. Condition : Ta=25 Condition : IF=10mA 100 10 2.0 Relative Flux Relative Intensity 1.5 1.0 CI 1 0.5 0.1 0.0 0 2 4 6 8 10 12 Forward Current : IF (mA) 2016.12.9 14 16 18 20 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta () Page : 7 Technical Data VCEW1151CDS-3BZH3-TR Chromaticity vs. Forward Current Chromaticity vs. Ambient Temp. Condition : Ta = 25 Condition : IF = 10mA 0.300 0.280 0.270 20mA 0.280 0.260 y y 15mA 10mA 5mA 2mA 60 1mA 0.260 0 25 0.250 85 -40 -20 100 0.240 0.260 0.270 0.280 0.290 0.240 0.240 0.300 0.260 0.280 0.300 x x CI Max. Forward Current vs. Ambient Temp. Max. Forward Current vs. Duty Cycle Repetition Frequencyf50Hz 100 Duty 10% 100 Maximum Forward Current IFMAX (mA) Maximum Forward Current IFMAX (mA) 120 80 Duty 20% 60 40 Duty 50% 20 DC 10 1 0 -40 -20 0 20 40 60 Ambient Temperature Ta () 2016.12.21 80 100 120 1 10 100 Duty Ratio : (%) Page : 8 Soldering condition VCEW1151CDS-3BZH3-TR Soldering Precaution (acc.to EIAJ-4701/300) 1. Heat stress during soldering will influence the reliability of LEDs, however that effect will vary on heating method. Also, if components of varying shape are soldered together, it is recommended to set the soldering pad temperature according to the component most vulnerable to heat (e.g., surface mount LED). 2. LED parts including the resin are not stable immediately after soldering ( when they are not at room temperature), any mechanical stress may cause damage to the product. Please avoid such stress after soldering, especially stacking of the boards which may cause the boards to warp and any other types of friction with hard materials. 3. High hardness silicone resin is used for this product's lens, but the silicone resin has the characteristic that softens at the high temperature. There is a possibility of causing the transformation, the breakage, and peeling off of the lens when it touches the resin lens at the high temperature such as immediately after soldering. Please avoid touching the lens at the high temperature. 4. Recommended temperature profile for the Reflow soldering is listed as the temperature of the resin surface. Temperature distribution varies on heating method, PCB material, other components in the assembly, and mounting density . Please do not repeat the heating process in Reflow process more than twice. Recommended Reflow Soldering Condition Peak Temperature (Soldering 260 MAX. +1.5+5/s -1.5-5/s 230 MAX. 120sec MAX. Pre-heating 150180 40sec MAX. Notes 1 Temperature Profile for the reflow should be set to the surface temperature of resin which is on the top of LED. This should be the maximum temperature for soldering. Lowering the heating temperature and decreasing heating time is very effective in achieving higher reliability. Notes 2 The reflow soldering process should be done up to twice(2 times Max). When second process is performed, interval between first and second process should be as short as possible to prevent absorption of moisture to resin of LED. The second soldering process should not be done until LEDs have returned to room temperature (by nature-cooling) after first soldering process. 2016.12.9 Page : 9 Soldering condition VCEW1151CDS-3BZH3-TR 5. If soldering manually, Stanley recommends using a soldering iron equipped with temperature control. During the actual soldering process, make sure that the soldering iron never touches the LED itself, and avoid the LED's electrode heating temperature reaching above the heating temperature of the solder pad. All repairs must be performed only once in the same spot, and please avoid reusing components. 6. In soldering process, immediately after iron tip is cleaned, please make sure that the soldering iron reaches the appropriate temperature, before using. Also, please avoid applying any types of pressure to the soldered components before the solder has been cooled and hardened, as it may deteriorate solder performance and solder quality. 7. When using adhesive material for tentative fixatives, thermosetting resin or Ultraviolet radiation (UV) setting resin with heat shall be recommended. Recommended Manual Soldering Condition 8. Temperature of Iron Tip 350MAX. Soldering Duration, Time 3sec.Max.,1 time When cleaning, isopropyl alcohol shall be recommended. Some chemicals, including Freon substitute detergent could corrode or affect the optical characteristics of the lens or the casing surface. Please review the reference chart below for cleaning. Cleaning with ultrasonic shall not be recommended. 9. Flow soldering (dip soldering) is not recommended for this product. 2016.12.9 Chemical Adaptability x Isopropyl Alcohol Trichloroethylene x Chlorothene x Acetone x Thinner x Page : 10 Handling Precaution VCEW1151CDS-3BZH3-TR For Electric Static Discharge ( ESD) InGaN die LEDs are sensitive to voltage surges generated by On/Off status change and friction with synthetic materials, which may cause severe damage to the die or undermine its reliability. Damaged products may experience conditions such as extremely high reverse voltage or decrease of forward rise voltage deteriorating their optical characteristic. Stanley InGaN products are packed with anti-static components. However, the following precautions must be taken into account upon product shipment. 1. Electrification/Static Electricity protection In order to avoid product (die) damage from static electricity caused by electrified operator and other materials electrified friction coming in contact with the product, Stanley recommends taking the following precautions. Do not place electrified non-conductive materials near the LED product. Avoid LED products from coming into contact with metallic materials.( Should the metallic material be electrified , the sudden surge voltage will most likely damage the product.) Avoid a working process which may cause the LED product to rub against other materials. Install ground wires for any equipment, where they can be installed, with measures to avoid static electricity surges. Prepare a ESD protective area by placing a Conductive Mattress (1M MAX.) and Ionizer to remove any static electricity. Operators should wear a protective wrist-strap. Operators should wear conductive work-clothes and shoes. To handle the products directly, Stanley recommends the use of ceramic, and not metallic, tweezers. 2. Working Environment Dry environment is more likely to cause static electricity. Although a dry environment is ideal for storage state of LED products, Stanley recommends an environment with approximately 50% humidity after the soldering process. Recommended static electricity level in the working environment is 150V, which is the same value as Integrated Circuits (which are sensitive to static electricity). 2016.12.9 Page : 11 Handling Precaution VCEW1151CDS-3BZH3-TR Handling Precautions for Product Mounting Recommendation Load : less than 10N (to avoid the product breakage) During mounting, because of the mounter nozzle`s load and shape, the lens may break and the shape may change. Therefore, please adjust the load / nozzle adsorption point and the nozzle diameter before use. Moreover, since the occurrence of product remnants of the nozzle part is possible, please adjust the conditions before vacuum break or air discharge. Not just the nozzle, but also regarding other tools/instruments/parts, please do not put pressure on the lens. 2016.12.9 Page : 12 Handling Precaution VCEW1151CDS-3BZH3-TR Other Precautions 1. The products are designed to achieve higher performance reliability, however, they can be influenced by usage conditions. 2. Absolute maximum ratings are set to prevent LED products from failing due to excess stress (temperature, current, voltage, etc.). These ratings must never be overrun even for a moment. 3. To achieve the highest performance reliability, it is necessary to take into account, factors such as forward voltage adjusted to the usage temperature condition, derating of the power consumption, and other variable factors. 4. Please insert Straight Protective Resistors into the circuit in order to stabilize LED operation and to prevent the device from igniting due to excess current. 5. Please avoid to stick foreign material because molding resin in the products has adhesiveness. And please don't touch lens portion. 6. Please check the actual performance in the assembly because the Specification Sheets are described for LED device only. 7. Please refrain from looking directly at the light source of LED at high output, as it may harm your vision. 8. The products are designed to operate without failure in recommended usage conditions. However, please take the necessary precautions to prevent fire, injury, and other damages should any malfunction or failure arise. 9. The products are manufactured to be used for ordinary electronic equipment. Please contact our sales staff beforehand when exceptional quality and reliability are required, and the failure or malfunction of the products might directly jeopardize life or health (such as for airplanes, aerospace, transport equipment, medical applications, nuclear reactor control systems and so on).. 10. When there is a process of supersonic wave welding etc. after mounting the product, there is a possibility of affecting on the reliability of junction part in package (junction part of die bonding and wire bonding). Please use after affirming beforehand there is no problem. 11. The formal specification sheets shall be valid only by exchange of documents by both parties. 2016.12.9 Page : 13 Packaging Specifications VCEW1151CDS-3BZH3-TR This products are baked (moisture removal) before packaging, and are shipped in moisture-proof packaging (as shown below) to minimize moisture absorption during transportation. However, in regards to storing the products, the use of dry-box under the following conditions is recommended. Moisture-proof bag as the packaging is made of anti-static material but packaging box is not. Recommended Storage Condition / Products Warranty Period Temperature +530 Humidity Under 70% In the case of the package unopened , 6 months under Recommended Storage Condition . Please avoid rapid transition from low temp. condition to high temp. condition and storage in corroding and dusty environment. Time elapsed after Package Opening The package should not be opened until immediately prior to its use, and please keep the time frame between package opening and soldering which is maximum If the device needs to be soldered twice, both soldering must be completed within 672h. 672h. If any components should remain after their use, please seal the package and store them under the conditions Described in the Recommended Storage Condition . The product must be required to perform baking process (moisture removal) for at least 10h and not exceed for 12h , at 60+/-5 degrees C if following conditions apply. 1. In the case of color of indicators (those are in the package of desiccant) change or lose its blue color. 2. In the case of time is passed for 672h after the package is opened once. Please backing process must be performed after putting out from package. Baking may be performed in the tape-reel form, however if it is performed with the reel stacked over one another, it may case deformation of the reels and taping materials, which may cause problems during production. Please make sure that the product has cooled to normal temperature after performing the baking process. Provided that, baking process shall be 2 times MAX. 2016.12.9 Page : 14 Packaging Specifications VCEW1151CDS-3BZH3-TR Moisture-proof Packaging Specification Fastener for re-storage after opening bag. Customer's opening position. A Product Label Heat Sealing position (after product being put in) Desiccant with indicator for moisture level is enclosed. 1 NO. PART NAME MATERIALS REMARKS Moisture-proof bag with Aluminum layer PET+Al+PE with ESD protection Flow chartPackage to Mounting Flow Chart-package OpeningOpening to Mounting Stored under recommended condition Moisture-proof package first time opening Allowable leaving time exceeded (*) Yes No Discoloration of silica gel Yes No Baking LED under recommended condition Product Mounting Unused-product remained Yes Return to moisture-proof package and seal No Allowable leaving time means the maximum allowable leaving time after opening package, which depends on each LED type. The allowable leaving time should be calculated form the first opening of package to the time when soldering process is finished. When judging if the allowable leaving time has exceeded or not, please subtract the soldering time. The allowable leaving time after reopening should be calculated form the first opening of package, or from the time when baking process is finished. Finished Reopen the moisture-proof package 2016.12.9 Page : 15 Packaging Specifications VCEW1151CDS-3BZH3-TR Packing box ( RoHSELV Compliant ) Box TYPE Outline dimension L x W x H (mm) Capacity of the box Type A 280 x 265 x 45 3 reel Type B 310 x 235 x 265 15 reel Type C 440 x 310 x 265 30 reel The above measure is all the reference value. The box is selected out of the above table by shipping quantity. Type A Material / box Cardboard C5BF 2016.12.9 Type B,C Material / box Cardboard K5AF Partition Cardboard K5BF NO. PART NAME MATERIAL REMARKS Packing Box Corrugated Cardbord without ESD protection Page : 16 Packaging Specifications VCEW1151CDS-3BZH3-TR (acc.to JIS-X0503(Code-39)) Label Specification A Product label A. Parts number B. Bar-code for parts number C. Parts code (In-house identification code for each parts number) D. Packed parts quantity E. Bar-Code for packed parts quantity F. Lot number & Rank (Please refer to Lot Number Notational System for details ) G. Bar-Code for Lot number & Rank B Opto device label A. Customer Name B. Parts Type C. Parts Code D. Parts Number E. Packed Parts Quantity F. Carton Number G. Shipping Date H. Bar-Code for In-house identification Number <Remark> Bar-code font : acc.to Code-39(JIX0503) 2016.12.9 Page : 17 Taping and Reel Specifications VCEW1151CDS-3BZH3-TR (acc.to JIS-C0806-03 Appearance Direction to take out Note "-TR" means Cathode Side of LEDs should be placed on the sprocket-hole side. Items Specifications Remarks Cover-tape Cover-tape shall be longer than 300mm without carrier-tape The end of cover-tape shall be held with adhesive tape. Carrier-tape Empty pocket shall be more than 25 pieces. Please refer to the above figure for Taping & reel orientation . Empty pocket shall be more than 40 pieces. The end of taping shall be inserted into a slit of the hub. Leader area Trailer area 2016.12.9 Page : 18 Taping and Reel Specifications VCEW1151CDS-3BZH3-TR Unit (acc.to JIS-C0806-03 :mm Taping Dimensions (Center hole) (Center hole) Reel Dimensions 2016.12.9 NO. PART NAME REMARKS Carrier reel with ESD protection Cover tape with ESD protection Carrier tape with ESD protection Page : 19 Taping and Reel Specifications VCEW1151CDS-3BZH3-TR (acc.to JIS-C0806-03 Qty. per Reel 4,000 parts/reel Minimum Qty. per reel might be 500 parts when getting less than 4,000 parts. In such case, parts of 500-unit-qty. shall be packed in a reel and the qty. shall be identified on the label. Mechanical strength Cover-tape adhesive strength shall be 0.11.0N ( An angle between carrier-tape and cover-tape shall be170 deg. ). Both tapes shall be so sealed that the contained parts will not come out from the tape when it is bent at a radius of 15mm. Others Reversed-orientation, Up-side down placing, side placing and out of spec. parts mix shall not be held. Max qty. of empty pocket per reel shall be defined as follows. Qty./reel Max. qty. of empty pocket Remarks 500 1 - 1,000 1 - 1,500 2 - 2,000 2 No continuance 2,500 3 No continuance 3,000 3 No continuance 3,500 4 No continuance 4,000 4 No continuance 2016.12.9 Page : 20 Lot Number Notational System VCEW1151CDS-3BZH3-TR - 1digit Production Location (Mark identify alphabet) - 1digit Production Year (Last digit of Production Year 20099,20100,20111,) - 2digits Production Month (Jan. to Sep. , should be 01,02,03,) - 2digits Production Date - 3digits Serial Number - 2digits Tape and Reel following Number 2016.12.9 Page : 21 Correspondence to RoHSELV instruction VCEW1151CDS-3BZH3-TR This product is in compliance with RoHSELV. Prohibition substance and it's criteria value of RoHSELV are as follows. RoHS instruction ...... Refer to following (1)(6). ELV instruction .......... Refer to following (1)(4). Substance Group Name 2016.12.9 Criteria Value (1) Lead and its compounds 1,000ppm Max (2) Cadmium and its compounds 100ppm Max (3) Mercury and its compounds 1,000ppm Max (4) Hexavalent chromium 1,000ppm Max (5) PBB 1,000ppm Max (6) PBDE 1,000ppm Max Page : 22 Reliability Testing Result VCEW1151CDS-3BZH3-TR 1. Reliability Testing Result Test Item Standard Test Condition Duration Failure Operating Life EIAJ ED-4701 /100(101) Ta=25 Maximum Rated Current 1,000h 0 / 20 High Temperature Operating Life EIAJ ED-4701 /100(101) 1,000h 0 / 20 Low Temperature Operating Life EIAJ ED-4701 /100(101) Ta=-40 Maximum Rated Current 1,000h 0 / 20 Wet High Temperature Operating Life EIAJ ED-4701 /100(102) Ta=60 Rh=90% Maximum Rated Current 1,000h 0 / 20 High Temperature Storage Life EIAJ ED-4701 /200(201) Ta = Tstg max. Maximum Storage Temperature 1,000h 0 / 20 Low Temperature Storage Life EIAJ ED-4701 /200(202) Ta = Tstg min. Minimum Storage Temperature 1,000h 0 / 20 Wet High Temperature Storage Life EIAJ ED-4701 /100(101) Ta=60 Rh=90% 1,000h 0 / 20 Thermal Shock EIAJ ED-4701 /100(105) Ta= Tstg max. Tstg min. (each 15min) 1,000 cycles 0 / 20 Resistance to Reflow Soldering EIAJ ED-4701 /300(301) Moisture Soak 60 60% 121h Preheating 150180 90120s Soldering 260 5sec 2 times 0 / 20 EIAJ ED-4701 /300(304) C=100pF R2=1.5k 2,000V 3 times of each polarity 0 / 10 EIAJ ED-4701 /400(403) 98.1m/s2(10G) 1002,000Hz 20min Sweep XYZ direction 2h of each direction 0 / 10 Electric Static Discharge(ESD) 2 Vibration, Variable Frequency Ta=85 Maximum Rated Current 1 1 Maximum Rated Current at Maximum Rated Operating Temperature 2 Reference test 2. Failure Criteria Item Symbol Condition Failure Criteria Luminous Intensity IV 10mA Testing Min. Value Standard Min. Value x 0.5 Forward Voltage VF 10mA Testing Max. Value Standard Max. Value x 1.2 Reverse Current IR VR=5V Testing Max. Value Standard Max. Value x 2.5 Cosmetic appearance - - Notable, decollation, deformation and cracking 2016.12.9 Page : 23 VCEW1151CDS-3BZH3-TR Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the "Foreign Exchange and Foreign Trade Control Law," it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com/en 2016.12.9 Page : 24