DO NOT
SCALE FROM
THIS PRINT
.120
REF
3.05 .100
REF (TYP)
2.54
.050
REF
1.27 .080 2.03
REF
"C"
REF (TYP)
(SEE NOTE 5
& TABLE 3)
.145
REF
3.68
"A" "A"
"B"
"B"
'D'
01
02
FIG 1
THROUGH HOLE/STRAIGHT MODIFIED
(SHOWN: SFML-125-X1-XXX-D)
SFML-1XX-XX-XXX-D-XXX
No OF POSITIONS
-05, -07, -08, -10 THRU -50
(PER ROW)
ROW SPECIFICATION
-D: DOUBLE ROW
(USE SFML-XX-D-X)
LEAD STYLE
-01: THROUGH HOLE
(USE C-44-01-XXX, SEE FIG 1, SHT 1)
-02: SURFACE MOUNT
(USE C-44-02-XXX, SEE FIG 3, SHT 2)
-03: STRAIGHT MODIFIED
(USE C-44-03-XXX, SEE FIG 1, SHT 1)
-L1: THROUGH HOLE (LOW INSERTION)
(USE C-61-01-XXX, SEE FIG 1, SHT 1)
-L2: SURFACE MOUNT (LOW INSERTION)
(USE C-61-02-XXX, SEE FIG 3, SHT 2)
-L3: STRAIGHT MODIFIED (LOW INSERTION)
(USE C-61-03-XXX, SEE FIG 1, SHT 1)
-T1: THROUGH HOLE (PHOS BRONZE)
(USE C-119-01-XXX, SEE FIG 1, SHT 1)
-T2: SURFACE MOUNT (PHOS BRONZE)
(USE C-119-02-XXX, SEE FIG 3, SHT 2)
PLATING SPECIFICATION
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-H: 30µ" HEAVY GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA,
TIN/LEAD (90/10+/-5%) TAIL (ONLY AVAILABLE ON
-02 AND -L2 LEADSTYLES)
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(LEAVE BLANK FOR STANDARD
AND USE SFML-XX-D)
-A: ALIGNMENT PIN (USE SFML-XX-D-A)
(SEE FIG 5, SHT 3)
-LC: LOCKING CLIP (SEE FIG 7, SHT 3)
(USE (2) LC-05-TM & SFML-XX-D) (SEE NOTE 9)
-P: PICK & PLACE PAD (SEE FIG 6, SHT 3)
(USE PPP-02) (NOT AVAILABLE IN 5 POS)
-TR: TAPE & REEL PACKAGING
(N/A with -X1 AND -X3 LEAD STYLE,
SEE FIG 2, SHT 1)
-K: POLYIMIDE FILM PAD
(USE K-500-300)(SEE FIG.4, SHT. 2)
-SN: SOLDER NAIL (USE SFML-XX-D-SN &
WT-27-01-T) (SEE FIG 8, SHT 4)
(AVAILABLE ON -X2 LEAD STYLES ONLY)
-SN2: SOLDER NAIL FOR .093 BOARD
(USE SFML-XX-D-SN &
WT-27-02-T) (SEE FIG 8, SHT 4)
(ONLY AVAILABLE WITH -02, L2, AND T2 LEAD
STYLE. NOT AVAILABLE WITH -A, -LC OPTIONS)
OPTIONS
AE
(SEE TABLE 1)
"B" REF
.180 4.57
REF
.110 2.79
REF
(No OF POS x .050 [1.27]) + .015 [.38] REF
(No OF POS x .050 [1.27] + .155 [3.94] REF
.035 0.89
REF (TYP)
(SEE TABLE 1)
"A"
(TYP)
1
MAX SWAY
(No OF POS x .050 [1.27]) - .050 [1.27]
SECTION "A"-"A"
C3
C4
C2
.050 1.27
REF
SECTION "B"-"B"
.065
REF
1.65
.005
REF
0.13
.050 1.27
(TYP)
2
MAX TOE
SFML-XX-D
POS. 1
USER DIRECTION OF UNREELING
FIG 2
-TR: TAPE & REEL PACKAGING
(ALTERNATE KEYING OPTION SHOWN)
SEE NOTE 6
.060 1.52
REF
.020 0.51
REF
DETAIL 'D'
ALTERNATE CONSTRUCTION
C
C1
C8
AE
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01[.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
.050 [1.27] x .050 [1.27] LOCKING SOCKET ASSEMBLY
BY:
SFML-1XX-XX-XXX-D-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
4/19/99
4
1
SHEET SCALE: 2:1
INSULATOR:
VECTRA E130i, LCP UL 94 VO
COLOR: BLACK
CONTACT: BeCu
PHOS BRONZE
c:\enterprisevault\DWG\MISC\MKTG\SFML-1XX-XX-XXX-D-XXX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. COPLANARITY: .004 [.10] FOR POS. 10 THRU 26
.006 [.15] FOR POS. 27 THRU 50
3. MINIMUM PUSHOUT FORCE: .5 LB.
4. MAXIMUM ALLOWABLE BOW: .002 INCH/INCH [MM/MM] AFTER ASSEMBLY.
5. POSITIONS -05 AND -07 WILL HAVE ONLY ONE CLIP AT DIMENSION SHOWN AND
WILL NOT HAVE POLARIZATION NOTCH;
POSITIONS -10 THROUGH -24 WILL HAVE ONLY ONE CLIP AT DIMENSION SHOWN;
POSITIONS -25 THROUGH -34 WILL HAVE TWO CLIPS AT DIMENSION SHOWN;
POSITIONS -35- THROUGH -50 WILL HAVE THREE CLIPS: TWO AT DIMENSION
SHOWN & ONE CENTERED ON INSULATOR.
6. SEE NOTCH FOR PROPER ORIENTATION.
7. PINS CAN BE ORIENTED IN ANY DIRECTION; BOTH ROWS MUST FACW SAME WAY.
8. MAXIMUM PIN HEIGHT VARIATION BETWEEN ANY TWO ROWS: .003[.08].
9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION IS NOT
COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT
FOR ALL ASSEMBLIES WITH THE –LC OPTION."
10. TUBE PARTS WITH NOTCH TOWARD ARROW.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION AE
"M"
"P"
.1575
±.0050
4.000
±0.127
FIG 4
-K: POLYIMIDE FILM PAD OPTION
(SHOWN: SFML-110-X2-X-D-K)
(ALTERNATE CONSTRUCTION SHOWN)
NOTE:
"M" = USED MEASURED DIMENSION (REF)
"P" = {("M" - .1575 [4.000]) /2}
.020 [.51]
.190 4.83
"C"
"C"
(TOL ACCUM
.005 [.13]
(No OF POS x .050 [1.27]) - .050 [1.27]
(TYP)
2
MAX SWAY
C-XX-X2-XXX
C7
.185
-
.005
+
.002 4.70
-
0.13
+
0.05
.161
REF
4.09
+4
SEE NOTE 2
SECTION "C"-"C"
-2
C6
FIG 3
-X2: SURFACE MOUNT
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
C5
SHEET OF
BY:
SFML-1XX-XX-XXX-D-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
4/19/99
4
2
SHEET SCALE: 4:1
REVISION AE
c:\enterprisevault\DWG\MISC\MKTG\SFML-1XX-XX-XXX-D-XXX-MKT.SLDDRW
.050 [1.27] x .050 [1.27] LOCKING SOCKET ASSEMBLY
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
(No OF POS x .050 [1.27]) + .125 [3.18] REF
.050
REF
1.27
(No OF POS x .050 [1.27]) + .075 [1.91] REF
FIG 5
-A: ALIGNMENT PIN OPTION
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
(ALTERNATE CONSTRUCTION SHOWN)
SFML-XX-D-A
.050
REF
1.27
.056
REF
1.42
.065 1.65
(No OF POS x .050 [1.27]) + .075 [1.91]
FIG 7
-LC: LOCKING CLIP OPTION
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
(ALTERNATE CONSTRUCTION SHOWN)
SFML-XX-D
LC-05-TM
.010
REF
0.25
.062 1.57
(SEE TABLE 2)
"A"
.010 [.25]
LOCKING TAB
.394
REF
10.01
PPP-02
FIG 6
-P: PICK & PLACE PAD OPTION
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
(ALTERNATE CONSTRUCTION SHOWN)
.225 5.72
REF
PT-1-24-13-09
PT-1-24-14-09
( SEE NOTE 10)
SAMTEC ANTI-STATIC
SAMTEC ANTI-STATIC
PT-1-24-15-09
PACKAGE PARTS IN TUBES AS SHOWN
SHEET OF
BY:
SFML-1XX-XX-XXX-D-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
4/19/99
4
3
SHEET SCALE: 3:1
REVISION AE
c:\enterprisevault\DWG\MISC\MKTG\SFML-1XX-XX-XXX-D-XXX-MKT.SLDDRW
.050 [1.27] x .050 [1.27] LOCKING SOCKET ASSEMBLY
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
"B" REF
(No OF POS x .050[1.27]) + .185[4.70] REF
(No OF POS x .050[1.27]) + .085[2.16]
2
MAX SWAY
(TYP)
"D"
"D"
FIG 8
-SNX: SOLDER NAIL OPTION
(SHOWN: SFML-125-02-XXX-D-SN
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
(ONLY AVAILABLE ON -X2 LEAD STYLES)
SFML-XX-D-SN
WT-27-XX-T
C
L
C10
.026 0.66
REF (2 PLCS)
FLUSH TO .005[0.13] ABOVE
SECTION "D"-"D"
C
L
C9
TABLE 3
OPTION
"B"
-SN
.066[1.68]
SN2
.101[1.80]
SHEET OF
.050 [1.27] x .050 [1.27] LOCKING SOCKET ASSEMBLY
BY:
SFML-1XX-XX-XXX-D-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
4/19/99
4
4
SHEET SCALE: 4:1
REVISION AE
c:\enterprisevault\DWG\MISC\MKTG\SFML-1XX-XX-XXX-D-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
