NTE SERIES Isolated 1W Single Output SM DC-DC Converters SELECTION GUIDE Nominal Input Voltage Output Voltage Output Current (V) (V) (mA) NTE0303M 3.3 3.3 303 410 NTE0305M 3.3 5 200 390 NTE0503M 5 3.3 303 270 74 40 619 NTE0505M 5 5 200 294 68 35 2418 NTE0505ME 5 5 200 260 77 40 419 NTE0509M 5 9 111 267 75 43 1174 FEATURES NTE0512M 5 12 83 260 77 42 634 Wide Temperature Performance at Full 1 Watt Load, -40C to 85C NTE0515M 5 15 66 256 78 44 360 NTE1205M 12 5 200 124 67 47 621 Lead Frame Technology NTE1209M 12 9 111 114 73 77 488 CECC00802 Reflow (280C) NTE1212M 12 12 83 113 74 88 360 Single Isolated Output NTE1215M 12 15 66 111 75 95 252 1kVDC Isolation When operated with additional external load capacitance the rise time of the input voltage will determine the maximum external capacitance value for guaranteed start up. The slower the rise time of the input voltage the greater the maximum value of the additional external capacitance for reliable start up. O rd e rC o de 5 Efficiency to 78% Power Density 1.8W/cm 3 3.3V, 5V & 12V Input UL 94V-0 Package Material No Heatsink Required Internal SMD Construction 73 30 1234 78 35 632 MIN TYP MAX Voltage Range 3.30 5 12 30 3.63 5.5 V 13.2 47 mA p-p TYP MAX Units 1.0 W 1.0 1.2 %/% 10 14 12.8 8.3 6.8 6.3 15 9.0 7.5 7.0 40 60 62 49 39 38 85 75 65 76 Reflected Ripple Current Units OUTPUT CHARACTERISTICS Parameter Conditions TA = -40C to 85C Multi Layer Ceramic Capacitors Lead Free Compatible Load Regulation 3 DESCRIPTION www.dc-dc.com kHrs Conditions Rated Power2 Voltage Set Point Accuracy Line regulation The NTE series of miniature surface mounted DC-DC Converters employ leadframe technology and transfer moulding techniques to bring all of the benefits of IC style packaging to hybrid circuitr y. The devices are fully compatible with CECC00802 to 280C which allows them to be placed and reflowed with IC's, thus reducing time and cost in production. The co-planarity of the pin positions is based upon IEC 191-6:1990. The devices are suitable for all applications where high volume production is envisaged. (pF) Continuous operation, 3.3V input types 2.97 Continuous operation, 5V input types 4.5 Continuous operation, 12V input types 10.8 Plastic Encapsulated MTTF up to 2.9 Million Hours (%) Parameter Toroidal Magnetics Custom Solutions Available (mA) Isolation Capacitance MTTF1 INPUT CHARACTERISTICS 3.3V, 5V, 9V, 12V and 15V Output Footprint Over Pins 1.64cm 2 Input Current at Rated Load Efficiency Ripple and Noise MIN See tolerance envelope High VIN to low V IN 10% load to rated load, 0303M, 0305M, 0503M, 0505ME 10% load to rated load, 5V output types 10% load to rated load, 9V output types 10% load to rated load, 12V output types 10% load to rated load, 15V output types BW=DC to 20MHz, 0303M, 0305M, 0503M, 0505ME types BW=DC BW=DC BW=DC BW=DC to to to to 20MHz, 20MHz, 20MHz, 20MHz, 5V output types 9V output types 12V output types 15V output types ABSOLUTE MAXIMUM RATINGS Short circuit duration 4 Internal power dissipation Lead temperature 1.5mm from case for 10 seconds Input Voltage VIN , NTE03 types Input Voltage VIN , NTE05 types Input voltage V IN , NTE12 types 1 2 3 4 5 1second 600mW 300C 5.5V 7V 15V Calculated using MIL-HDBK-217F with nominal input voltage at full load. See derating curve. 12V input types have typically 3% less load regulation change. Supply voltage must be discontinued at the end of the short circuit duration. If components are required in tape and reel format suffix order code with -R, e.g. NTE0505M-R All specifications typical at TA =25C, nominal input voltage and rated output current unless otherwise specified. % mV p-p NTE SERIES Isolated 1W Single Output SM DC-DC Converters ISOLATION CHARACTERISTICS Parameter Conditions Isolation Test Voltage Resistance Flash tested for 1 second Viso=1000VDC MIN TYP MAX Units 1000 10 VDC G GENERAL CHARACTERISTICS Parameter Conditions Switching Frequency All variants MIN TYP MAX Units 110 kHz TEMPERATURE CHARACTERISTICS Parameter Conditions MIN Specification Storage All output types -40 -55 0303M, 0305M, 0503M, 0505ME 0505M, 1205M All other output types Free air convection Case Temperature above ambient Cooling TYP MAX Units 85 125 C C 30 40 40 C PERFORMANCE CHARACTERISTICS TEMPERATURE DERATING tolerance envelope (3.3V output types) tolerance envelope (all other types) +9% 2.0 +10% +5% +1% VNOM +1% +2.5% VNOM -7% -7% 1.5 -2.5% -7.5% 0.5 -15% 85C 1.0 Safe Operating Area 0 -40 10 25 50 75 Output Load Current (%) 100 10 25 50 75 Output Load Current (%) 100 0 50 100 Ambient Temperature (C) MECHANICAL DIMENSIONS 12.70 7.62 14 12 10 11.20 7.70 10.40 DETAIL A 8 REFERENCE PLANE NTE0505M 3 5 2.54 1.50 1.20 7 5.00 DETAIL A S SEATING PLANE NA - Not available for electrical connection P XYYWW 1 PIN 1 GND 3 VIN 5 NA 7 0V 8 +V 10 NA 12 NA 14 NA 0.5 10 PINS 0.65 0.2 M S 0.55 P 2.10 6.60 (6.35) (5.95) 5.85 0.25 0.10 2.79MAX 1.875 MAX 0.1 S 0.30 0.20 Weight: 1.21g All dimensions in mm XX.XX 0.25mm. All pins on a 2.54mm pitch. C&D Technologies (NCL) Limited reserve the right to alter or improve the specification, internal design or manufacturing process at any time, without notice. Please check with your supplier or visit our web site to ensure that you have the current and complete specification for your product before use. (c) C&D Technologies (NCL) Limited 2001 NDC NTE.4 No part of this publication may be copied, transmitted or stored in a retrieval system or reproduced in any way including, but not limited to, photography, photocopy, magnetic or other recording means, without prior written permission from C&D Technologies (NCL) Limited. Instructions for use are available from www.dc-dc.com C&D Technologies (NCL) Ltd Tanners Drive, Blakelands North Milton Keynes MK14 5BU, England Tel: +44 (0)1908 615232 Fax:+44 (0)1908 617545 email: info@cdtechno-ncl.com www: http://www.dc-dc.com C&D Technologies (NCL), Inc. 5816 Creedmoor Road, Raleigh NC 27612, USA Tel: +1 (919) 571-9405 Fax: +1 (919) 571-9262 email: info@us.cdtechno-ncl.com 150