AIC1737 LOW OUTPUT VOLTAGE, 300mA LOW DROPOUT LINEAR REGULATOR SPEC NO: DS-1737-00 08/06/00 z z z z z z z z z z z z z FEATURES Low Dropout Voltage of 180mV at 100mA Output Current (3.0V Output Version). Guaranteed 300mA Output Current. Internal 1.3 P-MOSFET Draws no Base Current. Low Ground Current at 55A. 2% Accuracy Output Voltage of 1.8V/ 2.0V/ 2.5V/ 2.7V/ 3.0V. Input Voltage Range up to 12V. Needs only 1F for Stability. Current and Thermal Limiting. DESCRIPTION The AIC1737 is a 3-pin low dropout linear regulator. The superior characteristics of the AIC1737 include zero base current loss, very low dropout voltage, and 2% accuracy output voltage. Typical ground current remains approximately 55 A, from no load to maximum loading conditions. Dropout voltage is exceptionally low. Output current limiting and thermal limiting are built in to provide maximal protection to the AIC1737 against fault conditions. APPLICATIONS Voltage Regulator for CD-ROM Drivers. Voltage Regulator for LAN Cards. Voltage Regulator for Microprocessor. Wireless Communication Systems. Battery Powered Systems. The AIC1737 comes in the popular 3-pin SOT-89 packages. TYPICAL APPLICATION CIRCUIT VIN VOUT AIC1737 VIN + GND 1F CIN VOUT + 10F COUT Low Dropout Linear Regulator ANALOG INTEGRATIONS CORPORATION 4F, 9 Industry E. 9th Road, Science-based Industrial Park , Hsinchu, Taiwan, R.O.C. TEL: (8863)577-2500 FAX:(8863)577-2510 1 AIC1737 LOW OUTPUT VOLTAGE, 300mA LOW DROPOUT LINEAR REGULATOR SPEC NO: DS-1737-00 08/06/00 ORDERING INFORMATION AIC1737-XCX ORDER NUMBER AIC1737-18CX AIC1737-20CX AIC1737-25CX AIC1737-27CX AIC1737-30CX (SOT-89) PACKAGING TYPE X: SOT89 OUTPUT VOLTAGE 18: 1.8V 20: 2.0V 25: 2.5V 27: 2.7V 30: 3.0V PIN CONFIGURATION FRONT VIEW 1. GND 2: IN 3: OUT 1 2 3 ABSOLUTE MAXIMUM RATINGS Input Supply Voltage ......................................................................................... -0.3~12V Operating Junction Temperature Range .................................................. -40C~ 85C Storage Temperature Range ....................................................................... -65C~150C SOT-89 Package .............................. 0.5W Power Dissipation TEST CIRCUIT Refer to the TYPICAL APPLICATION CIRCUIT ELECTRICAL CHARACTERISTICS (Ta=25C, CIN=1 F, COUT=10 F, unless otherwise specified.) PARAMETER Output Voltage Output Voltage Temperature Coefficiency TEST CONDITIONS No Load AIC1737-30 AIC1737-27 AIC1737-25 AIC1737-20 AIC1737-18 (Note 1) VIN=4.0~12V VIN=4.0~12V VIN=4.0~12V VIN=4.0~12V VIN=4.0~12V MIN. TYP. MAX. UNIT 2.940 2.646 2.550 1.960 1.764 3.000 2.700 2.500 2.000 1.800 50 3.060 2.754 2.550 2.040 1.836 150 V ANALOG INTEGRATIONS CORPORATION www.analog.com.tw 4F, 9 Industry E. 9th Road, Science-based Industrial Park , Hsinchu, Taiwan, R.O.C. TEL: (8863)577-2500 FAX:(8863)577-2510 PPM/C 2 AIC1737 LOW OUTPUT VOLTAGE, 300mA LOW DROPOUT LINEAR REGULATOR SPEC NO: DS-1737-00 08/06/00 ELECTRICAL CHARACTERISTICS PARAMETER Line Regulation Load Regulation (Note 2) Current Limit (Note 3) Dropout Voltage (Note 4) TEST CONDITIONS IL=1mA MIN. TYP. MAX. UNIT VIN=4.0~12V 3 10 mV VIN=5V, IL=0.1~300mA 7 25 mV VIN=5V, VOUT=0V 320 IL=0.1mA IL=300mA IL=300mA IL=300mA IL=300mA IL=300mA VIN=4~12V AIC1737s AIC1737-30 AIC1737-27 AIC1737-25 AIC1737-20 AIC1737-18 IO=0.1mA~IMAX Ground Current Note 1: Note 2: Note 3: Note 4: (Continued) 440 0.2 540 570 610 820 920 55 mA 10 640 670 710 970 1070 80 mV A Guaranteed by design. Regulation is measured at constant junction temperature, using pulse testing with a low ON time. Current limit is measured by pulsing a short time. Dropout voltage is defined as the input to output differential at which the output voltage drops 100mV below the value measured with a 1V differential. TYPICAL PERFORMANCE CHARACTERISTICS Load Transient Response Dropout Voltage vs Load Current 1000 900 800 Dropout Voltage (mV) COUT=1F VOUT=1.8V VOUT=2.0V VOUT=3.0V VOUT 700 100mV/DIV 600 500 400 VOUT=2.5V 300 IOUT=150mA VOUT=2.7V IOUT VOUT=3.0V 200 IOUT=0.1mA 100 0 0 50 100 150 200 250 300 Load Current (mA) Time (0.5mS/DIV) ANALOG INTEGRATIONS CORPORATION www.analog.com.tw 4F, 9 Industry E. 9th Road, Science-based Industrial Park , Hsinchu, Taiwan, R.O.C. TEL: (8863)577-2500 FAX:(8863)577-2510 3 AIC1737 LOW OUTPUT VOLTAGE, 300mA LOW DROPOUT LINEAR REGULATOR SPEC NO: DS-1737-00 08/06/00 TYPICAL PERFORMANCE CHARACTERISTICS (Continued) Line Transient Response Load Transient Response COUT=1F IL=1mA COUT=10F VIN=6V VOUT=3.0V VOUT 20mV/DIV VIN VIN=4.0V IOUT=150mA IOUT=0.1mA VOUT VOUT=3.0V 20mV/DIV IOUT Time (1mS/DIV) Time (0.5mS/DIV) Recommended max. Output Current vs. Input voltage 400 Dropout Voltage (mV) 350 300 3.0V 2.7V 2.5V 250 200 1.8V 2.0V 150 100 50 0 3 4 5 6 7 8 9 10 11 12 Input Voltage (V) BLOCK DIAGRAM VIN VOUT CURRENT LIMITING ERROR AMP + - + THERMAL SHUTDOWN 1.235V Reference GND ANALOG INTEGRATIONS CORPORATION www.analog.com.tw 4F, 9 Industry E. 9th Road, Science-based Industrial Park , Hsinchu, Taiwan, R.O.C. TEL: (8863)577-2500 FAX:(8863)577-2510 4 AIC1737 LOW OUTPUT VOLTAGE, 300mA LOW DROPOUT LINEAR REGULATOR SPEC NO: DS-1737-00 08/06/00 PIN DESCRIPTION VOUT PIN - Output pin. GND PIN - Power GND. VIN PIN - Power Supply Input. APPLICATION INFORMATIONS A 1F (or greater) capacitor is required between the AIC1737 output and ground for stability. Without this capacitor the part will oscillate. Even though most types of capacitor may work, the equivalent series resistance (ESR) should be held to 5 or less if Aluminum electrolytic type is used. Many Aluminum electrolytics have electrolytes that freeze at about -30C, so solid tantalums are recommended for operation below -25C. The value of this capacitor may be increased without limit. A 0.1F capacitor (or greater) should be placed from the AIC1737 input to ground if the lead inductance between the input and power source exceeds 500nH (approximately 10 inches of trace). PHYSICAL DIMENSIONS z SOT-89 (unit: mm) A D D1 C H E L B e e1 SYMBOL MIN MAX A 1.40 1.60 B 0.36 0.48 C 0.35 0.44 D 4.40 4.60 D1 1.62 1.83 E 2.29 2.60 e 1.50 (TYP.) e1 3.00 (TYP.) H 3.94 4.25 L 0.89 1.20 SOT-89 MARKING Part No. AIC1737-18 AIC1737-20 AIC1737-25 AIC1737-27 AIC1737-30 Marking BM18 BM20 BM25 BM27 BM30 ANALOG INTEGRATIONS CORPORATION www.analog.com.tw 4F, 9 Industry E. 9th Road, Science-based Industrial Park , Hsinchu, Taiwan, R.O.C. TEL: (8863)577-2500 FAX:(8863)577-2510 5