Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Aluminum Solid Capacitors
fd
L
15 min. 4 min.
19 min.
fD
F
+
–
fd
L
15 min. 4 min.
19 min.
fD
F
+
–
Lot. No.
Polarity marking (−)
Series
R. Capacitance
R. Voltage
Radial Lead Type
Series : SEPC
● Super low ESR (5 mΩ to 24 mΩ)
● Large capacitance (2700 F max.)
● RoHS compliance, Halogen free
Speci cations
Features
Size code B9 C55 C6 C9 E7 E9 E12 E13 F13
Category temperature range
–55 °C to +105 °C
Rated voltage range (V.DC)
2.5 6.3 2.5 to 16 6.3 to 16 2.5 to 16 16 2.5 to 6.3 2.5 to 16
Rated capacitance range (F)
100 to 560
220
100 to 560 100 to 820
150 to 1000 180 to 1000
180 to 270 470 to 820
470 to 2700
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d) Please see the attached characteristics list
Endurance
+105 °C, 5000 h, rated voltage applied
Capacitance change
Within ±20 % of the initial value
tan d< 150 % of the initial limit
DC leakage current Within the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 1000 h, No-applied voltage
Capacitance change
Within ±20 % of the initial value
tan d< 150 % of the initial limit
DC leakage current Within the initial limit (after voltage processing)
Marking
Unit : mm
✽1 2SEPC390M, 2SEPC560M : 0.5±0.05
✽2 16SEPC150MD, 10SEPC270M : 0.45±0.05
B9, C55, C6, C9, E7, E9 size flat rubber is used.
B9, C55, C6, C9, E7, E9 Size
E12, E13, F13 Size
Size code
fD±0.5
L max. F
±0.5
fd±0.05
B9 5.0 9.0 2.0 0.6
C55 6.3 5.5 2.5 0.45
C6 6.3 6.0 2.5 0.45
✽1
C9 6.3 9.0 2.5 0.6
E7 8.0 7.0 3.5 0.6
✽2
E9 8.0 9.0 3.5 0.6
E12 8.0 12.0 3.5 0.6
E13 8.0 13.0 3.5 0.6
F13 10.0 13.0 5.0 0.6
Dimensions (not to scale)
✽ Externals of fi gure are the reference.
Feb. 201702
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Aluminum Solid Capacitors
Series
Rated
voltage
(V.DC)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications
Part number
fDL
Ripple ✽1
current
(mAr.m.s.)
ESR ✽2
(mΩ max.)
tan d ✽3LC ✽4
(µA)
SEPC
2.5
100 5.0 9.0 B9 4180 7 0.10 500 2SEPC100MZ
330 5.0 9.0 4180 7 0.10 500 2SEPC330MZ
390 6.3 6.0 C6 3900 10 0.12 500 2SEPC390M
470 5.0 9.0 B9 4180 7 0.10 500 2SEPC470MZ
560
5.0 9.0 4180 7 0.10 500 2SEPC560MZ
6.3 6.0 C6 3900 10 0.12 500 2SEPC560M
6.3 9.0 C9 5600 7 0.10 500 2SEPC560MW
8.0 9.0 E9 4700 8 0.10 280 2SEPC560MX
820
6.3 9.0 C9 5600 7 0.10 500 2SEPC820MW
8.0 7.0 E7 5300 8 0.10 500 2SEPC820MD
8.0 9.0 E9 6100 7 0.10 500 2SEPC820MX
8.0 9.0 7200 5 0.10 500 2SEPC820MY
8.0 13.0 E13 6100 7 0.10 500 2R5SEPC820M
1000 8.0 9.0 E9 6100 7 0.10 500 2SEPC1000MX
2700 10.0 13.0 F13 5560 10 0.10 1350 2SEPC2700M
4.0
560
6.3 9.0 C9 5600 7 0.10 500 4SEPC560MW
8.0 9.0 E9 6100 7 0.10 500 4SEPC560MX
8.0 13.0 E13 6100 7 0.10 500 4SEPC560M
680 8.0 13.0 6100 7 0.10 544 4SEPC680M
820 10.0 13.0 F13 6640 7 0.10 656 4SEPC820M
6.3
220 6.3 5.5 C55 2980 18 0.12 280 6SEPC220M
470
6.3 9.0 C9 5600 7 0.10 592 6SEPC470MW
8.0 9.0 E9 5700 8 0.10 592 6SEPC470MX
8.0 13.0 E13 5700 8 0.10 592 6SEPC470M
560 6.3 9.0 C9 5600 7 0.10 705 6SEPC560MW
8.0 9.0 E9 6100 7 0.10 705 6SEPC560MX
680 10.0 13.0 F13 6640 7 0.10 857 6SEPC680M
1000 8.0 7.0 E7 3530 18 0.10 1260 6SEPC1000MD
1500 10.0 13.0 F13 5560 10 0.10 1890 6SEPC1500M
10 270 8.0 7.0 E7 3220 22 0.12 500 10SEPC270MD
16
100 6.3 6.0 C6 2490 24 0.10 320 16SEPC100M
6.3 9.0 C9 4680 10 0.10 500 16SEPC100MW
150 8.0 7.0 E7 3220 22 0.12 500 16SEPC150MD
180 8.0 9.0 E9 5000 10 0.10 576 16SEPC180MX
8.0 12.0 E12 4360 16 0.10 576 16SEPC180M
220 8.0 7.0 E7 4150 13 0.10 500 16SEPC220MD
270 8.0 9.0 E9 5000 10 0.10 864 16SEPC270MX
8.0 12.0 E12 5000 11 0.10 864 16SEPC270M
470 10.0 13.0 F13 6100 10 0.10 1504 16SEPC470M
✽1 Ripple current (100 kHz/ +105 °C ), ✽2 ESR (100 kHz to 300 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes
◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”.
Frequency 120 Hz < f < 1 kHz 1 kHz < f < 10 kHz 10 kHz < f < 100 kHz 100 kHz < f < 500 kHz
Coeffi cient 0.05 0.3 0.7 1
Frequency correction factor for ripple current
Characteristics list
Feb. 201702
■ If you want to use our products described in this online catalog for applications requiring
special qualities or reliability, or for applications where the failure or malfunction of the
products may directly jeopardize human life or potentially cause personal injury
(e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion
equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety
equipment), it is necessary to verify whether the specifications of our products fit to such
applications. Please ensure that you will ask and check with our inquiry desk as to whether
the specifications of our products fit to such applications use before you use our products.
■ The quality and performance of our products as described in this online catalog only apply
to our products when used in isolation. Therefore, please ensure you evaluate and verify
our products under the specific circumstances in which our products are assembled in your
own products and in which our products will actually be used.
■ If you use our products in equipment that requires a high degree of reliability, regardless
of the application, it is recommended that you set up protection circuits and redundancy
circuits in order to ensure safety of your equipment.
■ The products and product specifications described in this online catalog are subject to
change for improvement without prior notice. Therefore, please be sure to request and
confirm the latest product specifications which explain the specifications of our products in
detail, before you finalize the design of your applications, purchase, or use our products.
■ The technical information in this online catalog provides examples of our products'
typical operations and application circuits. We do not guarantee the non-infringement of
third party's intellectual property rights and we do not grant any license, right, or interest
in our intellectual property.
■ If any of our products, product specifications and/or technical information in this online
catalog is to be exported or provided to non-residents, the laws and regulations of the
exporting country, especially with regard to security and export control, shall be observed.
■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies
depending on the part number or series of our products.
■ When you use the inventory of our products for which it is unclear whether those products
are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the
website inquiry form and contact us.
We do not take any responsibility for the use of our products outside the scope of the
Guidelines and precautions regarding the
described in this online catalog.
<Regarding the Certificate of Compliance with
01-Apr-19
technical information and use of our products
the EU RoHS Directive/REACH Regulations>