© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3092_F862_X2_310 • 11/7/2014 1
One world. One KEMET
Benets
• Approvals: ENEC, UL, cUL, CQC
• Rated voltage: 310 VAC 50/60 Hz
• Capacitance range: 0.1 – 4.7 µF
• Lead spacing: 15.0 – 27.5 mm
• Capacitance tolerance: ±20%, ±10%
• Climatic category: 40/110/56, IEC 60068-1
• Tape and reel in accordance with IEC 60286-2
• RoHS Compliant and lead-free terminations
• Operatingtemperaturerangeof-40˚Cto+110˚C
• 100% screening factory test at 1,900 VDC
• QualicationbasedonAEC-Q200guidelines
Overview
The F862 Series is constructed of metallized polypropylene
lmencapsulatedwithself-extinguishingresininaboxmaterial
recognizedbyUL94V–0.TheF862Seriesisidealforharsh
environmental conditions and meets the demanding Automotive
ElectronicsCouncil'sAEC–Q200qualicationrequirements.
Applications
Typical applications include connection in series with the
mains, capacitive power supplies and energy meters, with
specialemphasisinautomotiveapplicationsforsevereambient
conditions.
AC Line EMI Suppression and RC Networks
F862 Series Metallized Polypropylene Film for Harsh
Environmental Conditions, Class X2, 310 VAC (Automotive Grade)
Part Number System
F862 BC104 M310 C
Capacitor Class Series Lead Spacing
(mm) Size Code Capacitance Code (pF) Capacitance
Tolerance Voltage (VAC) Lead and
Packaging Code
F = Film X2, Metallized
Polypropylene
B = 15
D = 22.5
F = 27.5
See Dimension
Table
First two digits represent
signicantgures.Third
digitspeciesnumber
of zeros.
K = ±10%
M = ±20%
310 See Ordering
OptionsTable
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3092_F862_X2_310 • 11/7/2014 2
Film Capacitors – AC Line EMI Suppression and RC Networks
F862 Series Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade)
Ordering Options Table
Lead Spacing
Nominal (mm) Type of Leads and Packaging Lead Length
(mm)
Lead and
Packaging
Code
15
Standard Lead and Packaging Options
Pizza Pack
4+2/-0
Z
Other Lead and Packaging Options
Pizza – Short Leads
3.2+0.3/-0.2
ZL32K
Bulk (Bag) – Max Length Leads
25+5/-0
ALR0L
Ammo Pack
H0= 18.5+/-0.5
R
22.5
Standard Lead and Packaging Options
Pizza – Long Leads
17+0/-1
ZLH0J
Pizza Pack
4+2/-0
Z
Other Lead and Packaging Options
Pizza – Short Leads
3.2+0.3/-0.2
ZL32K
Bulk (Bag) – Max Length Leads
25+5/-0
ALR0L
Ammo Pack
H0= 18.5+/-0.5
R
27.5
Standard Lead and Packaging Options
Pizza – Long Leads
17+0/-1
ZLH0J
Pizza Pack
4+2/-0
Z
Pizza – Short Leads
3.2+0.3/-0.2
ZL32K
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3092_F862_X2_310 • 11/7/2014 3
Film Capacitors – AC Line EMI Suppression and RC Networks
F862 Series Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade)
Dimensions – Millimeters
L B
H
d
p
LL
0.5
FRONT VIEW
SIDE VIEW
Size Code p B HLd
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
BG
15.0
+/-0.4
6.0
Maximum
12.0
Maximum
18.0
Maximum
0.8
BK
15.0
+/-0.4
7.5
Maximum
13.5
Maximum
18.0
Maximum
0.8
BP
15.0
+/-0.4
8.5
Maximum
14.5
Maximum
18.0
Maximum
0.8
BS
15.0
+/-0.4
10.0
Maximum
16.0
Maximum
18.0
Maximum
0.8
BY
15.0
+/-0.4
11.0
Maximum
19.0
Maximum
18.0
Maximum
0.8
BZ
15.0
+/-0.4
12.0
Maximum
20.0
Maximum
18.0
Maximum
0.8
DB
22.5
+/-0.4
6.0
Maximum
14.5
Maximum
26.0
Maximum
0.8
DI
22.5
+/-0.4
7.0
Maximum
16.0
Maximum
26.0
Maximum
0.8
DJ
22.5
+/-0.4
8.5
Maximum
17.0
Maximum
26.0
Maximum
0.8
DO
22.5
+/-0.4
10.0
Maximum
18.5
Maximum
26.0
Maximum
0.8
DP
22.5
+/-0.4
11.0
Maximum
20.0
Maximum
26.0
Maximum
0.8
DU
22.5
+/-0.4
13.0
Maximum
22.0
Maximum
26.0
Maximum
0.8
FC
27.5
+/-0.4
11.0
Maximum
20.0
Maximum
31.5
Maximum
0.8
FI
27.5
+/-0.4
13.0
Maximum
25.0
Maximum
31.5
Maximum
0.8
FN
27.5
+/-0.4
14.0
Maximum
28.0
Maximum
31.5
Maximum
0.8
FS
27.5
+/-0.4
19.0
Maximum
29.0
Maximum
31.5
Maximum
0.8
FY
27.5
+/-0.4
22.0
Maximum
37.0
Maximum
31.5
Maximum
0.8
Note: See Ordering Options Table for lead length (LL/H0) options.
Approvals
AutomotiveGradeproductsmeetorexceedtherequirementsoutlinedbytheAutomotiveElectronicsCouncil.Detailsregardingtest
methodsandconditionsarereferencedindocumentAEC–Q200,StressTestQualicationforPassiveComponents.Foradditional
informationregardingtheAutomotiveElectronicsCouncilandAEC–Q200,pleasevisittheirwebsiteatwww.aecouncil.com.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3092_F862_X2_310 • 11/7/2014 4
Film Capacitors – AC Line EMI Suppression and RC Networks
F862 Series Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade)
Performance Characteristics
Rated Voltage 310 VAC 50/60 Hz
Capacitance Range 0.1 – 4.7 µF
Capacitance Tolerance ±20%, ±10%
Temperature Range -40ºCto+110°C
Climatic Category 40/110/56
Approvals ENEC, UL, cUL, CQC
Dissipation Factor
MaximumValuesat+23°C
C≤0.1µF C > 0.1 µF
1 kHz 0.3% 0.2%
Test Voltage Between
Terminals
The 100% screening factory test is carried out at 1,900 VDC. The voltage level
isselectedtomeettherequirementsinapplicableequipmentstandards.All
electrical characteristics are checked after the test. It is not permitted to repeat
thistestasthereisarisktodamagethecapacitor.KEMETisnotliableinsuch
case for any failures.
Insulation Resistance
Minimum Values Between Terminals
C≤0.33µF ≥30,000MΩ
C > 0.33 µF ≥10,000MΩ•µF
In DC Applications Recommendedvoltage≤630VDC
Impedance Graph
0.1 µF p. 15
0.33 µF p.22.5
1 µF p. 27.5
0.001
0.01
0.1
1
10
100
0.1 110 100
Z [W]
F [MHz]
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3092_F862_X2_310 • 11/7/2014 5
Film Capacitors – AC Line EMI Suppression and RC Networks
F862 Series Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade)
Environmental Test Data
Test IEC Publication Procedure
Endurance IEC 60384–14
1.25 x V
R
VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 second,
1,000 hours at upper rated temperature
Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2
Bump IEC60068–2–29TestEb 1,000bumpsat390m/s2
Change of Temperature IEC 60068–2–14 Test Na Upper and lower rated temperature 5 cycles
ActiveFlammability IEC 60384–14 VR+20surgepulsesat2.5kV(pulseevery5seconds)
PassiveFlammability IEC 60384–14 IEC60384–1,IEC60695–11–5Needle-ametest
Damp Heat Steady State IEC60068–2–78TestCab +40°Cand93%RH,56days
THB Test
85°C,85%RHand240VAC,1,000hours
Capacitancechange(∆C/C):≤10%
Dissipationfactorchange(∆tanδ):≤5*10-3 (at 1 kHz)
InsulationresistanceRinsortimeconstantτ=CR
Rins:≥50%ofinitiallimit
Approvals
Mark
Specication
File Number
EN/IEC 60384–14 V4413
UL 60384–14 and CAN/CSA–
E60384–14 E97797
IEC 60384-14
CQC14001105462
CQC14001105463
CQC14001105464
CQC14001105465
CQC14001105692
Environmental Compliance
All new KEMET EMI capacitors are RoHS Compliant and Halogen Free.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3092_F862_X2_310 • 11/7/2014 6
Film Capacitors – AC Line EMI Suppression and RC Networks
F862 Series Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade)
Table 1 – Ratings & Part Number Reference
(1) M = ±20%, K = ±10%.
(2) Insert lead and packaging code. See Ordering Options Table for available options.
Bold blue text = In progress, samples available.
Capacitance
Value (µF) Size Code Maximum Dimensions in mm Lead Spacing (p) dV/dt
(V/µs) Part Number
BHL
0.1 BK 7.5 13.5 18 15 400 F862BK104(1)310(2)
0.12 BK 7.5 13.5 18 15 400 F862BK124(1)310(2)
0.15 BK 7.5 13.5 18 15 400 F862BK154(1)310(2)
0.18 BP 8.5 14.5 18 15 400 F862BP184(1)310(2)
0.22 BP 8.5 14.5 18 15 400 F862BP224(1)310(2)
0.33 BS 10 16 18 15 400 F862BS334(1)310(2)
0.39 BS 10 16 18 15 400 F862BS394(1)310(2)
0.47 BY 11 19 18 15 400 F862BY474(1)310(2)
0.56 BZ 12 20 18 15 400 F862BZ564(1)310(2)
0.47 DO 10 18.5 26 22.5 200 F862DO474(1)310(2)
0.56 DO 10 18.5 26 22.5 200 F862DO564(1)310(2)
0.68 DP 11 20 26 22.5 200 F862DP684(1)310(2)
0.82 DP 11 20 26 22.5 200 F862DP824(1)310(2)
1DU 13 22 26 22.5 200 F862DU105(1)310(2)
1.2 DU 13 22 26 22.5 200 F862DU125(1)310(2)
1FC 11 20 31.5 27.5 150 F862FC105(1)310(2)
1.5 FI 13 25 31.5 27.5 150 F862FI155(1)310(2)
2.2 FN 14 28 31.5 27.5 150 F862FN225(1)310(2)
3.3 FS 19 29 31.5 27.5 150 F862FS335(1)310(2)
4.7 FY 22 37 31.5 27.5 150 F862FY475(1)310(2)
Capacitance Value (µF) Size Code B (mm) H (mm) L (mm) Lead Spacing (p) dV/dt (V/µs) Part Number
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3092_F862_X2_310 • 11/7/2014 7
Film Capacitors – AC Line EMI Suppression and RC Networks
F862 Series Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade)
Soldering Process
The implementation of the RoHS directive has resulted in the
selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder.
This has increased the liquidus temperature from that of 183ºC
forSnPbeutecticalloyto217–221ºCforthenewalloys.Asa
result, the heat stress to the components, even in wave soldering,
hasincreasedconsiderablyduetohigherpre-heatandwave
temperatures. Polypropylene capacitors are especially sensitive
to heat (the melting point of polypropylene is 160 – 170ºC). Wave
solderingcanbedestructive,especiallyformechanicallysmall
polypropylene capacitors (with lead spacing of 5 mm to 15 mm),
andgreatcarehastobetakenduringsoldering.Therecommended
solderprolesfromKEMETshouldbeused.Pleaseconsult
KEMET with any questions. In general, the wave soldering curve
fromIECPublication61760-1Edition2servesasasolidguideline
for successful soldering. Please see Figure 1.
Reowsolderingisnotrecommendedforthrough-holelm
capacitors.Exposingcapacitorstoasolderingproleinexcessof
theabovetherecommendedlimitsmayresulttodegradationor
permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive
curing oven to cure resin for surface mount components. Insert
through- hole parts after the curing of surface mount parts. Consult
KEMETtodiscusstheactualtemperatureproleintheoven,if
through-hole components must pass through the adhesive curing
process. A maximum two soldering cycles is recommended. Please
allow time for the capacitor surface temperature to return to a
normaltemperaturebeforethesecondsolderingcycle.
Figure 1
Dielectric
Film Material
Maximum Preheat
Temperature
Maximum
Peak Soldering
Temperature
Capacitor
Lead
Spacing
<10 mm
Capacitor
Lead
Spacing =
15 mm
Capacitor
Lead
Spacing
>15 mm
Capacitor
Lead
Spacing
<15 mm
Capacitor
Lead
Spacing
>15 mm
Polyester
130°C
130°C
130°C
270°C
270°C
Polypropylene 100°C 110°C 130°C 260°C 270°C
Polyphenylene
Sulphide 150°C 150°C 160°C 270°C 270°C
0
50
100
150
200
250
300
0
40
80
120
160
200
240
Temperature (°C)
Time (s)
ca 2°C/s
ca 3.5°C/s typical
ca 5°C/s
Cooling
2+3s max
115°C max
T
preh eat
ΔT <150°C
100°C
Preheating
Typical
First wave
Second wave
260°C
Wave Soldering Recommendations
Manual Soldering Recommendations
Following is the recommendation for manual soldering with a
soldering iron.
Recommended Soldering Temperature
0
50
100
150
200
250
300
350
400
012345678
Soldering time (sec)
Soldering iron bit temperature (deg C)
Thesolderingirontiptemperatureshouldbesetat350°C
(+10°Cmaximum)withthesolderingdurationnottoexceedmore
than 3 seconds.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3092_F862_X2_310 • 11/7/2014 8
Film Capacitors – AC Line EMI Suppression and RC Networks
F862 Series Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade)
Soldering Process cont'd
Selective Soldering Recommendations
Selectivedipsolderingisavariationofreowsoldering.Inthismethod,theprintedcircuitboardwiththrough-holecomponentstobe
solderedispreheatedandtransportedoverthesolderbathasinnormalowsolderingwithouttouchingthesolder.Whentheboardis
overthebath,itisstoppedandpre-designedsolderpotsareliftedfromthebathwithmoltensolderonlyattheplacesoftheselected
components,andpressedagainstthelowersurfaceoftheboardtosolderthecomponents.
Thetemperatureproleforselectivesolderingissimilartothedoublewaveowsolderingoutlinedinthisdocument,however, instead
of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than
indoublewaveowsoldering,andgreatcaremustbetakensothatthepartsarenotoverheated.
Construction
Leads
Metal Contact
Layer
Metal Contact
Layer
Margin
Margin
Detailed Cross Section
Self-Extinguishing
Resin
Molded Plastic
Case
Molded Plastic
Case
Single-sided Metallized
Polypropylene Film
(Second Layer)
Single-sided Metallized
Polypropylene Film
(First Layer)
Margin
Single-sided
Metallized
Polypropylene
Film
FILM WINDING SCHEME OPTIONS
1 Section
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided Metallized Polypropylene Film
2 Sections
3 Sections 4 Sections
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
1 Section
Double-sided Metallized Polyester Film
3 Sections
Double-sided
Metallized
Polyester Carrier
Film
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
4 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Polypropylene
Film Dielectric
1 Section
Polypropylene Film/Foil
2 Sections
Metal Foil Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metallized Polyphenylene
Sulfide Film with
Vacuum-Evaporated
Aluminum Electrodes
1 Section
Metallized Polyphenylene
Sulfide Film (SMR)
Metallized
Impregnated
Paper
1 Section
Metallized Impregnated Paper
Single-sided
Metallized
Polyester
Film
1 Section
Single-sided Metallized Polyester Film
Winding Scheme
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3092_F862_X2_310 • 11/7/2014 9
Film Capacitors – AC Line EMI Suppression and RC Networks
F862 Series Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade)
Marking
KEMET or
KEC
IEC Climatic Category
Approval
Marks
TOPFRONT
Capacitance Capacitance
Tolerance
Series &
Safety Class
Rated
Voltage
Passive
Flammability
Class
Manufacturing
Date Code
Passive Flammability Category:
B for volume ≥ 1750 mm3
C for volume < 1750 mm3
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3092_F862_X2_310 • 11/7/2014 10
Film Capacitors – AC Line EMI Suppression and RC Networks
F862 Series Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade)
Packaging Quantities
Size
Code
Lead
Spacing
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short Leads
Bulk
Long Leads Ammo Pizza
BG
15
6
12
18
1750
1000
680
935
BK
7.5
13.5
18
1000
800
500
748
BP
8.5
14.5
18
1000
650
440
663
BS
10
16
18
750
550
380
561
BY
11
19
18
450
400
340
510
BZ
12
20
18
350
300
330
459
DB
22.5
6
14.5
26
805
450
464
660
DI
7
16
26
700
450
380
564
DJ
8.5
17
26
450
350
280
468
DO
10
18.5
26
360
350
235
396
DP
11
20
26
300
200
217
360
DU
13
22
26
230
150
200
300
FC
27.5
11.0
20.0
31.5
300
FI
13.0
25.0
31.5
250
FN
14.0
28.0
31.5
230
FS
19.0
29.0
31.5
170
FY
22.0
37.0
31.5
150
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3092_F862_X2_310 • 11/7/2014 11
Film Capacitors – AC Line EMI Suppression and RC Networks
F862 Series Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade)
Lead Taping & Packaging (IEC 60286–2)
Taping Speci cation
Dimensions in mm
Standard IEC 60286–2
Lead spacing +6/-0.1 F 5 7.5 10 15 22.5 27.5 F
Carrier tape width +1/-0.5 W18 18 18 18 18 18 18+1/-0.5
Hold-down tape width Minimum W
0
66910 10 10
Position of sprocket hole +/-0.5 W
1
999999 9+0.75/-0.5
Distancebetweentapes Maximum W
2
333333 3
Sprocket hole diameter +/-0.2 D
0
444444 4
Feed hole lead spacing +/-0.2(1) P
0
(3) 12.7 12.7 12.7 12.7 12.7 12.7 12.7
Distance lead – feed hole +/-0.7 P
1
3.85 3.75 7.7 5.2 7.8 5.3 P1
Deviation tape – plane Maximum ∆p 1.3 1.3 1.3 1.3 1.3 1.3 1.3
Lateral deviation +/-2 ∆h 222222 2
Total thickness +/-0.2 t0.7 0.7 0.7 0.7 0.9MAX 0.9MAX 0.9MAX
Sprockethole/capbody +/-0.5 H
0
(2) 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 18+2/-0
(1) Maximum cumulative feed hole error, 1 mm per 20 parts.
(2) 16.5 mm available on request.
(3) 15 mm available on request (F ≥ 10 mm).
Lead Spacing 5 mm
Lead Spacing 7.5 mm
Lead Spacing 10 – 15 mm
Lead Spacing 22.5 – 27.5 mm
0
0
0
0
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3092_F862_X2_310 • 11/7/2014 12
Film Capacitors – AC Line EMI Suppression and RC Networks
F862 Series Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade)
H
T
W
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Speci cations
Series Dimensions (mm)
H
W
T
R4x,R4x+R,R7x,RSB
360 340 59
F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
330
330
50
Reel Speci cations
Series
Dimensions (mm)
D
H
W
R4x,R4x+R,R7x,RSB
355
500
30
25 55 (Max)
F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
360
500
30 46 (Max)
Manufacturing Date Code (IEC–60062)
Y = Year, Z = Month
Year
Code
Month
Code
2000
M
January
1
2001
N
February
2
2002
P
March
3
2003
R
April
4
2004
S
May
5
2005
T
June
6
2006
U
July
7
2007
V
August
8
2008
W
September
9
2009
X
October
O
2010
A
November
N
2011
B
December
D
2012
C
2013
D
2014
E
2015
F
2016
H
2017
J
2018
K
2019
L
2020
M
D
W
H
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3092_F862_X2_310 • 11/7/2014 13
Film Capacitors – AC Line EMI Suppression and RC Networks
F862 Series Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade)
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Of ces
Fort Lauderdale, FL
Tel: 954-766-2800
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-306-9353
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Paris, France
Tel: 33-1-4646-1006
Sasso Marconi, Italy
Tel: 39-051-939111
Central Europe
Landsberg,Germany
Tel: 49-8191-3350800
Kamen, Germany
Tel: 49-2307-438110
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
Espoo, Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3092_F862_X2_310 • 11/7/2014 14
Film Capacitors – AC Line EMI Suppression and RC Networks
F862 Series Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade)
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand
verifyingtheextenttowhichtheInformationcontainedinthispublicationisapplicabletoanorderatthetimetheorderisplaced.
AllInformationgivenhereinisbelievedtobeaccurateandreliable,butitispresentedwithoutguarantee,warranty,orresponsibilityofanykind,expressedorimplied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare
notintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.TheInformationisintendedforuseonly
bycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.AnytechnicaladviceinferredfromthisInformationorotherwise
providedbyKEMETwithreferencetotheuseofKEMET’sproductsisgivengratis,andKEMETassumesnoobligationorliabilityfortheadvicegivenorresultsobtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur.Accordingly,customerapplicationswhichrequireahighdegreeofreliabilityorsafetyshouldemploysuitabledesignsorothersafeguards(suchasinstallationofprotective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Althoughallproduct–relatedwarnings,cautionsandnotesmustbeobserved,thecustomershouldnotassumethatallsafetymeasuresareindictedorthatothermeasuresmaynot
berequired.