F727751000 - Radiall - Datasheet.Directory

LC Series

F727

www.radiall.comwww.radiall.com

1-3

CONTENTS

Introduction ........................................................................................................................................ 1-4 to 1-5

Standard range for Telecom Application

Characteristics ..................................................................................................................................................... 1-5

Simplex LC connectors ........................................................................................................................................... 1-6

APC 8° Pre-angled Simplex connectors ...................................................................................................................... 1-7

Duplex LC connectors ............................................................................................................................................ 1-8

For Military, Navy and Aerospace Application

Characteristics ..................................................................................................................................................... 1-9

LC connectors ...................................................................................................................................................... 1-9

Adapters

Simplex adapters ................................................................................................................................................. 1-10

Duplex adapters ................................................................................................................................................... 1-10

Accessories

Duplex removable clips ......................................................................................................................................... 1-11

Inner sleeves ....................................................................................................................................................... 1-11

Crimping rings ..................................................................................................................................................... 1-11

Connector caps ................................................................................................................................................... 1-11

Super exible boots .............................................................................................................................................. 1-13

Straight boots ..................................................................................................................................................... 1-13

Angled boots ....................................................................................................................................................... 1-13

LC kit Congurator .................................................................................................................................... 1-14

Pages

www.radiall.com

1-5

1-4

Radiall LC connector is the Small Form Factor (SFF) solution for high density applications

and features the familiar latching mechanism of the RJ-45 modular plug.

The LC connector is ideal to guarantee very high performances while saving space.

It benefits from the most advanced of Radiall’s technologies, such as the secured

bonding and crimping reliability to provide a secure connexion and very fast assembly.

Radiall's LC series is available in 2 configurations depending on the application:

- Standard range for Telecom applications: tested according to GR-326-CORE Telcordia

and IEC 60874 specifications

- Aerospace range: specific LC designed to perform with aerospace cables in harsh

environment conditions

Radiall’s LC product range is manufactured under a worldwide license from OFS,

formerly known as Lucent Technologies.

BENEFITS & FEATURES

• Easy mounting and installation

- Small Form Factor for higher density (half size of SC connector)

- Radiall has a proprietary secure bonding to protect the floating mechanism during the resin injection process

- Latched push-pull system for quick insertion and removal even on very dense circuitry

- APC 8° pre-angled version is available to accelerate installation on the field

- Color coding

• High performance

- Facilitate high-speed applications with lower power requirements due to low insertion loss (0.1 dB typical)

and high return loss (>60 dB SingleMode APC)

- High precision alignment with proven 1.25 mm zirconia ferrule

- Tested according to GR-326-CORE Telcordia and IEC 60874 specifications

• Secure Connexion

- Pull-proof design

- Radiall has improved the crimping reliability thanks to a mini metallic tube protecting the fiber while reducing

stress and ensuring excellent cable retention

- Different protection boots available with exclusive shape to tighten the cable and maintain optical performances

even when the cable is bent or pulled

• Flexible

- 2 configurations: Radiall LC is available in a standard configuration and in an aerospace grade for extended

temperature range and increased mechanical performances

- Available for MultiMode, SingleMode, PC, UPC and APC terminations

- Can be assembled in duplex configuration with a removable clip

- Duplex adapters are available in RJ-45 or SC cut-out

INTRODUCTION

www.radiall.comwww.radiall.com

1-5

1-4

APPLICATIONS

• Telecommunication:

Telecommunication networks, Fiber channel (SAN), Local Area Networks (LAN), FTTH

• Broadcast:

Broadcast TV program, transport high speed data flow by computer through CATV

• Industrial:

Video surveillance, fiber optic sensor for industrial process (measuring and control)

• Biomedical industry

• Military, Navy and aerospace

INTERNATIONAL STANDARD DOCUMENTS COMPLIANCE

• GR-326-CORE Telcordia specification

• IEC 61754-20 Fiber optic connector interfaces (LC connector family)

• IEC 61300 Fiber optic interconnecting devices and passive components - Basic test and measurement procedures

OPTICAL ChARACTERISTICS

SingleMode PC SingleMode APC MultiMode PC

Random

Against

a reference

patchcord

Random

Against

a reference

patchcord

Random

Against

a reference

patchcord

Wave length 1310-1550 nm 1310-1550 nm 850-1310 nm

Insertion Loss

Mean

Standard deviation

0.10 dB

0.07 dB

0.10 dB

0.05 dB

0.15 dB

0.12 dB

0.15 dB

0.10 dB

0.07 dB

0.10 dB

0.05 dB

Return Loss PC > 30 dB

UPC > 50 dB APC > 60 dB PC > 20 dB

Insertion Loss random: IEC 61300-3-34

Insertion Loss against a reference patchcord: IEC 61300-3-4 Method B

Return Loss: IEC 61300-3-6

Note: The optical performances also depend on the fiber and/or cable construction.

MEChANICAL ChARACTERISTICS

Cable diameter 0.9 mm Cable diameter 2 & 3 mm

Cable retention 7N 68N

Mechanical endurance 200 matings

ENVIRONMENTAL ChARACTERISTICS

Operating temperature -40°C / +85°C

Storage temperature -40°C / +85°C

MATERIALS

Moulded plastic parts V0 (UL 94)

Optical ferrule (connector) Zirconia

Alignment sleeve (adapter) Zirconia

INTRODUCTION

STANDARD RANgE FOR TELECOM APPLICATION

www.radiall.com

1-7

1-6

The simplex connectors are delivered with straight boots, dust

caps and crimping accessories, except for the “level 0” categories

which enable users to configure their connectors according

to the application.

SIMPLEX LC CONNECTORS

STANDARD RANgE FOR TELECOM APPLICATION

Fig. 1

Fig. 3

Fig. 2

Cable diameter Figure SingleMode PC

126µm - Blue

SingleMode APC

126µm - Green

MultiMode PC

128µm - Beige

MultiMode PC

128µm - Aqua Packaging

0.9 mm Fig 1 F727 102 100 F727 152 100 F727 103 100 F727 103 110 100

Level «0» (1)

for 2 or 3 mm Fig 2 F727 102 000 F727 152 000 F727 103 000 - 100

2 mm Fig 3 F727 102 500 F727 152 500 F727 103 500 F727 103 510 100

3 mm F727 102 700 F727 152 700 F727 103 700 F727 103 710 100

(1) The level “0” is supplied without boots or crimp sleeves. To complete your connector assembly kit, please refer

to the “accessories” section.

Level “0” is available for cables 0.9mm on demand.

For other cable diameters, please consult the Radiall sales team.

www.radiall.comwww.radiall.com

1-7

1-6

For 0.9 mm cable diameter

Boot Boot

Crimping ring

Inner sleeve

Connector level “0”

To get more information on how to find the corresponding part numbers and connector kit combination, please refer

to the LC kit configurator section.

APC 8° PRE-ANgLED SIMPLEX CONNECTORS

The APC version of the LC connector is also proposed in a pre-angled end face version for a quick polishing in the field

and ultra-low back reflexion.

Cable

diameter Figure

SingleMode APC

Pre-angled

126µm - Green

Packaging

0.9 mm F727 132 100 100

2 mm F727 132 500 100

For 2 or 3 mm cable diameter

Flexible configuration of simplex connector using level 0 part numbers

STANDARD RANgE FOR TELECOM APPLICATION

www.radiall.com

1-9

1-8

DUPLEX LC CONNECTORS

• Flexible configuration with a removable duplex clip:

Thanks to Radiall’s LC removable duplex clip, a simplex connector can be changed at any time to a duplex

connector.

Select 2 Simplex LC connectors and a duplex removable clip to create your duplex LC connector.

The duplex clip needs to be ordered separately. To select a clip, please refer to the “accessories” section.

• Duplex LC with non removable clip:

Radiall also offers a range of “complete LC duplex” connectors.

These “complete LC duplex” connectors present the advantage to be slightly smaller

than the ones with the removable clip. They are especially adapted to be mounted

into transceivers.

Note: the brace is not removable.

Cable

diameter Figure SingleMode PC

126µm - Blue

SingleMode APC

126µm - Green

MultiMode PC

128µm - Beige Packaging

2 mm

(f727.402.500.jpg)

F727 402 500 F727 452 500 F727 403 500 1

F727 502 500 F727 552 500 F727 503 500 100

3 mm

F727 402 700 F727 452 700 F727 403 700 1

- - F727 503 700 100

STANDARD RANgE FOR TELECOM APPLICATION

www.radiall.comwww.radiall.com

1-9

1-8

OPTICAL ChARACTERISTICS

SingleMode UPC SingleMode APC MultiMode PC

Wave length 1300 - 1550 nm 850 - 1300 nm

Insertion loss

Mean

Standard deviation

0.10 dB

0.05 dB

0.15 dB 0.10 dB

0.10 dB 0.05 dB

Return loss > 50 dB > 60 dB > 20 dB

Insertion Loss against a reference patchcord: IEC 61300-3-4 Method B

Return loss: IEC 61300-3-6 (Maximum loss variation)

Note: the optical performances also depend on the fiber or cable construction.

MEChANICAL ChARACTERISTICS

Cable diameter : 1.8 – 2 mm

Cable retention 68 N

Mechanical endurance 500 matings

Vibration (EN 2591-403) 27.7 grms

Mechanical shocks (EN2591-402) 50 g, 11 ms

ENVIRONMENTAL ChARACTERISTICS

Storage & operating temperature Thermal

shocks (EN 2591-305) -55°C/+125°C

Note: These are minimum performances. If requested, Radiall can perform additional tests to show the performance

of the aerospace grade LC beyond the values indicated in the tables.

MATERIALS

Moulded plastic parts V0 (UL 94)

Optical ferrule (connector) Zirconia

Alignment sleeve (adapter) Zirconia

LC CONNECTORS

Cable diameter Figure SingleMode PC MultiMode PC Packaging

1.8 - 2 mm Loose structure* F727 002 500Y F727 003 500Y 1

1.8 - 2 mm Tight structure* F727 002 520Y F727 003 520Y 1

*See cable structure definition in the glossary or in ARINC 802 document.

For other cable diameters and APC configurations, please consult the Radiall sales team.

LC FOR MILITARy, NAVy AND AEROSPACE APPLICATION

www.radiall.com

1-11

1-10

SIMPLEX ADAPTERS

ADAPTERS

Fig. 1

Fig. 3

Fig. 2

Fig. 4

Figure SingleMode

PC Blue

SingleMode

APC Green

MultiMode PC

Beige

MultiMode PC

Aqua Adapter type Alignment

sleeve Packaging

Fig 1 F727 710 000 F727 710 100 F727 710 700 F727 710 710 LC cut-out

Snap-in mounting

Zirconia 100

Fig 2 F727 711 000 F727 711 100 F727 711 700 F727 711 710

LC and low proﬁ le

cut-out

Snap-in mounting

DUPLEX ADAPTERS

Figure SingleMode PC

Blue

SingleMode APC

Green

MultiMode PC

Beige

MultiMode PC

Aqua Adapter type Alignment

sleeve Packaging

Fig 1

F727 750 000 F727 750 100 F727 750 700 - RJ-45 cut-out

Snap-in

mounting

Zirconia 100

- - F727 750 800 - PH/BR 100

Fig 2 F727 751 000 F727 751 100 F727 751 700 - RJ-45 and low

proﬁ le cut-out Zirconia 100

Fig 3

F727 752 000 F727 752 100 - F727 752 710 SC cut-out with

panel clip

Zirconia 100

- - F727 752 800 F727 752 810 PH/BR 100

Fig 4 F727 754 000 F727 754 100 F727 754 700 F727 754 710 SC RJ-45 cut-out

with panel clip Zirconia 100

www.radiall.com

1-11

1-10

ACCESSORIES

DUPLEX REMOVABLE CLIPS

Color Part number Packaging

Black F718 197 200

100

Blue (Singlemode PC) F718 197 201

Green (Singlemode APC) F718 197 205

Beige (MultiMode) F718 197 206

INNER SLEEVES

Cable dia. Part number Packaging

2 & 3 mm F718 158 200 100

CRIMPINg RINgS

Cable dia. Part number Packaging

2 mm F718 160 200 100

3 mm F718 170 200 100

CONNECTOR CAPS

Description Part number Packaging

Clipped Plastic dust cap F718 183 204 100

www.radiall.com

1-13

1-12

ACCESSORIES

SUPER FLEXIBLE BOOTS

The super flexible boots are especially recommended where space is limited and

a small bending radius is required (min radius R= 20 mm). The use of these boots

prevents any damage of the fiber even with a low bend radius. These boots are

available in many colors.

Figure Color Flexible boots Cable dia. Packaging

Black F718 207 200

2 mm 100

Blue F718 207 201

Yellow F718 207 202

Red F718 207 203

White F718 207 204

Green F718 207 205

Aqua F718 207 209

STRAIghT BOOTS

Boots are available in different colors and different dimensions depending

on the requirements.

Fig. 1 Fig. 2

Fig. 3

Color

Cable diameter

Packaging

0.9 mm

Fig 1

2 mm

Fig 2

3 mm

Fig 2

Universal boot for 2/3 mm

Fig 3

Black F718 166 200 F718 162 200 F718 193 200 F718 169 200

100

Blue F718 166 201 F718 162 201 F718 193 201 F718 169 201

Yellow F718 166 202 F718 162 202 - F718 169 202

Red F718 166 203 F718 162 203 F718 193 203 F718 169 203

White F718 166 204 F718 162 204 F718 193 204 F718 169 204

Green F718 166 205 F718 162 205 F718 193 205 F718 169 205

Beige F718 166 206 F718 162 206 F718 193 206 F718 169 206

Aqua F718 166 209 F718 162 209 F718 193 209 -

www.radiall.comwww.radiall.com

1-13

1-12

ACCESSORIES

ANgLED BOOTS

Angled boots are especially designed to adapt to environments where access

is limited.

There are short and long boots available which can be mounted in a stackable

position when operating in dense circuitry.

They can be combined to be used in duplex applications.

Cable dia. Figure Part number Description Packaging

2 mm Fig 1 F718 185 200 90° short style, grey color 100

Fig 2 F718 186 200 90° long style, grey color 100

Long style

Short style

Fig. 1 Fig. 2

www.radiall.com

1-14

LC kIT CONFIgURATOR

You can refer to this table and complete your connector by combining different accessories with level “0”.

Cable dia. 2 mm 3 mm

Fiber type SingleMode

SingleMode

APC

MultiMode

SingleMode

APC

MultiMode

Body color Blue Green Beige Blue Green Beige

Level «0» F727 102 000 F727 152 000 F727 103 000 F727 102 000 F727 152 000 F727 103 000

Inner

sleeves F718 158 200 F718 158 200

Crimping

ring F718 160 200 F718 170 200

Straight

Boot F718 162 20x(1) F718 193 20x(2)

Your nal connector kit

Replace x by the following digit for your color reference:

(1) : x = 0: black; 1: blue; 2: yellow; 3: red; 4: white; 5: green; 6: beige; 9: aqua

(2) : x = 0: black; 1: blue; 3: red; 4: white; 5: green; 6: beige; 9: aqua

Notes:

Refer to previous pages for angled or super flexible boot selection.

Level “0” is available for cables 0.9 mm on demand. Please consult the Radiall salesTeam.

www.radiall.com

D1F000XE - 2011 September Edition

AEROspace AUTOMOTIVE DEFENSE INDUSTRIAL INSTRUMENTATION SPACE TELECOM

MEDICAL

India - RADIALL India Pvt. Ltd

S.A.

RCS 397 566 860 000 29 - - 03 44 23 48 48