LITE-ON SEMICONDUCTOR GBJ2004 thru GBJ2010 REVERSE VOLTAGE - 400 to 1000 Volts FORWARD CURRENT - 20 Amperes GLASS PASSIVATED BRIDGE RECTIFIERS GBJ FEATURES Rating to 1000V PRV Ideal for printed circuit board Low forward voltage drop, high current capability. Reliable low cost construction utilizing molded plastic technique results in inexpensive product The plastic material has UL flammability classification 94V-0 I A H Q G D B ~ ~ + UL Recognition File # E95060 E - P C L M MECHANICAL DATA Polarity : Symbols molded on body Weight : 0.23 ounces, 6.6 grams Mounting position : Any N O O F J K GBJ MAX. DIM. MIN. A 29.70 30.30 B 19.70 20.30 17.0 C 18.0 4.90 D 4.70 11.20 E 10.80 F 2.70 2.30 3.10 G 3.40 H 3.40 3.80 I 4.40 4.80 J 2.50 2.90 K 0.60 0.80 L 2.00 2.40 M 0.90 1.10 10.20 9.80 N O 7.70 7.30 P 4.20 3.80 (3.0) x 45 Q All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward (with heatsink Note 2) Rectified Current @TC =100 C (without heatsink) SYMBOL GBJ2004 GBJ2006 GBJ2008 VRRM VRMS VDC 400 280 400 600 420 600 800 560 800 GBJ2010 1000 700 1000 UNIT V V V I(AV) 20.0 3.6 A IFSM 240 A Maximum forward Voltage at 10.0A DC VF 1.05 V Maximum DC Reverse Current at Rated DC Blocking Voltage IR 10 500 uA Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load @TJ =25 C @TJ =125 C I 2 t Rating for fusing (t < 8.3ms) I t 240 AS Typical Junction Capacitance per element (Note 1) CJ 80 pF R0JC 0.8 C/W TJ -55 to +150 C TSTG -55 to +150 Typical Thermal Resistance (Note 2) Operating Temperature Range Storage Temperature Range 2 NOTES : 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Device mounted on 300mm x 300mm x 1.6mm Cu Plate Heatsink. 2 C REV. 6, Feb-2013, KBDG05 RATING AND CHARACTERISTIC CURVES GBJ2004 thru GBJ2010 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 25 WITH HEATSINK 20 15 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 10 5 WITHOUT HEATSINK 0 20 40 60 80 100 120 FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 300 200 100 Single Half-Sine-Wave 0 1 140 2 CASE TEMPERATURE , C 20 10 50 100 FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.3 - TYPICAL JUNCTION CAPACITANCE 100 INSTANTANEOUS FORWARD CURRENT ,(A) 1000 100 10 TJ = 125 C 10 TJ = 25 C 1 PULSE WIDTH 300us TJ = 25 C, f = 1MHz 1 0.1 1 10 100 0 REVERSE VOLTAGE , VOLTS 0.2 0.4 0.6 1000 TJ = 125 C 100 TJ = 100 C 10 TJ = 50 C 1 TJ = 25 C 0.1 0.01 0 20 0.8 1 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT ,(uA) CAPACITANCE , (pF) 5 NUMBER OF CYCLES AT 60Hz 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 1.8 Legal Disclaimer Notice GBJ2004 thru GBJ2010 Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.