78
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-4000 Series (Wire-to-Board, Wire-to-Panel and Wire-to-Wire)
AMP Dynamic Series Connectors
D-4000 Series
Product Facts
■20A of current is achievable
with the use of 3-position
connectors
■Newly designed contacts
with four contact points
■Dynamic 4000 Series
achieved a 50% or greater
improvement in current
values compared with the
Dynamic 3000 Series.
At the same time, mating
height increased only
approximately 14%
■Current capacity per unit
volume is also higher by
approximately 32%
■Wire-to-board type (2-, 3-
and 4-position) and wire-to-
wire type (3-position). This
flexible line-up will help
meet customer demands.
Sequential pins are also
available.
Material and Finish
Receptacle Contact — Phosphor
bronze or copper alloy, gold plated with
0.38 µm nickel underplate
Tab Contact — Phosphor bronze or
copper alloy, gold plated with 0.38 µm
nickel underplate
Tab Post — Phosphor bronze or
copper alloy, tin plated on contact area
and gold plated with nickel underplate
Housing — Glass filled polyester
(PBT), UL 94V-0
Performance Characteristics
Pitch — 6.35 mm (250 mils)
Voltage Rating — 600 V (rms)
Current Rating — 2-position: 24 A;
3-position: 23 A; 4-position: 22 A
(when using #12 AWG wire)
Contact Resistance — 10 mΩMax.
Dielectric Withstanding Voltage —
2,500 V (1 minute)
Operating Temperature —
-55°C ~ +105°C
Technical Documents
Product Specification
108-78182
Application Specification
114-5362
D-4 Contact
0.38µm thick gold plating
Receptacle Contact
(Used in Receptacle Housing)
Tab Contact
(Used in Tab Housing)
Applicable Ins. Dia. Wire Contact Part Numbers Application Tooling
Wire Range Range Range
AWG mm2mm Mark Receptacle Tab Sequential Long Tab Mini-Applicator Hand Tool
16 1.25 2.0~3.75 M ST. 1747418-2 1747419-2 1-1747419-2 1762120-2 —
14 2.20 LP. 1747499-2 1747501-2 1-1747501-2 —1762130-1
14 2.20 2.9~4.1 L ST. 1747415-2 1747416-2 1-1747416-2 1762119-2 —
12 3.50 LP. 1747498-2 1747500-2 1-1747500-2 —1762129-1
Notes: Minimum order quantity for tooling is one.
Extraction Tool Part Number 1762461-1 (411-78186)
Mini-Applicator is for use on Automachine.
Strip Form contacts are used with Mini-Applicator and Loose-Piece contacts are with hand tools.
79
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-4000 Series (Continued)
AMP Dynamic Series Connectors
D-4000 Series
D-4200
Mating Dimensions
Receptacle Housing
No. of Part Number Dimensions
Pos. Keying : X Keying :Y AB
21-1747276-2 2-1747276-2 17.55 27.35
31-1747276-3 2-1747276-3 23.90 33.70
41-1747276-4 2-1747276-4 30.25 40.05
Tab Housing
Free-hanging Type
Panel Type Panel Cutout
No. of Part Number Keying : X Part Number Keying :Y Dimensions
Pos. Panel Type Free-hanging Type Panel Type Free-hanging Type ABC*
31-1747535-3 1-1747414-3 2-1747635-3 2-1747414-3 28.7 32.7 46.0
*Applicable to Panel Type only.
Mating Tab Housings
Part Number:
❏-1747535-❏
❏-1747414-❏
❏-1747277-❏
Mating Receptacle Housing
Part Number:
❏-1747276-❏
80
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-4000 Series (Continued)
AMP Dynamic Series Connectors
D-4000 Series
D-4200 (Continued)
PC Board Layout
Acceptable Board Thickness:
1.6–2.4
Board-mounting Tab Header
(Vertical Type)
Mating Receptacle Housing
Part Number:
❏-1747276-❏
No. of Part Number Dimensions
Pos. Keying : X Keying :Y AB
21-1747277-2 2-1747277-2 18.35 22.35
31-1747277-3 2-1747277-3 24.70 28.70
41-1747277-4 2-1747277-4 31.05 35.05
81
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-5200 Series (Wire-to-Board, Wire-to-Panel and Wire-to-Wire)
AMP Dynamic Series Connectors
D-5000 Series
D-5200S
High-Pressure
1-Row Type
D-5200M
High-Pressure
Modular Type
D-5200Mα
High Current
Modular Type
D-5200S
Free-hanging Type
D-5200S
Panel Type
D-5200S
Board-mounting
Vertical Type
D-5200M
Receptacle
Housing
D-5200Mα
Board-mounting
Horizontal Type
D-5200M
Board-mounting
Vertical Type
D-5200S
Receptacle Housing x 2
D-5200S
Receptacle
Housing
D-5200M
Receptacle
Housing
D-5200M Board-mount
Horizontal Type
D-5200M
Board-mounting
Horizontal Type
D-5200M
Free-hanging Type
D-5200M Panel Type
List of Dynamic Series Products by Application
82
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-5200 Series (Continued)
AMP Dynamic Series Connectors
D-5000 Series
Performance Characteristics
and Specifications
Wire AWG
#16
16A
#14
19A
#12
25A
#10
30A
Current
6 position max.
D-5200S/M Performance Characteristics
Pitch
Description
Voltage Rating
Contact Resistance
Operating Temperature
Dielectric Withstanding
Voltage
Current Rating
400mils
(10.16mm)
630V AC
2mΩMax.
-55°~+105°C
3,000V AC
(1 minute)
Material and Finish
Receptacle Contact
Tab Contact
Tab Post
Housing
Material
Copper alloy
Copper alloy
UL 94V-0 rated, glass filled
polyester (PBT)
Gold plating with
underplated nickel
Gold plating with
underplated nickel
Description Finish
Wire AWG
#20
12A
#18
16A
#16
20A
#14
25A
#12
33A
#10
38A
#8
45A
Current
Wire AWG
#20
12A
#18
15A
#16
18A
#14
23A
#12
31A
#10
35A
#8
43A
Current
Current for 3-pos. silver-plated
contacts
Current for 4-pos. silver-plated
contacts
D-5200MαPerformance Characteristics
Pitch
Description
Voltage Rating
Contact Resistance
Operating Temperature
Dielectric Withstanding
Voltage
Current Rating
400mils
(10.16mm)
630V AC
2mΩMax.
-55°~+105°C
3,000V AC
(1 minute)
Material and Finish
Receptacle Contact
Tab Contact
Tab Post
Housing
Material
Copper alloy
Copper alloy
UL 94V-0 rated, glass filled
polyester (PBT)
Silver plating with
underplated nickel
Silver plating with
underplated nickel
Description Finish
83
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-5200 Series (Continued)
AMP Dynamic Series Connectors
D-5000 Series
-55°~+105°C
Current Rating Voltage Rating
Performance Characteristics
and Specifications (Continued)
Technical Documents
Specifications and Instruction Sheets
Product Specification
Test Report
Application Specification
Extraction Tool (Part Number 409158-1) Instruction Sheet
Crimping Tool P/N : 234170-1
Crimping Tool P/N : 234171-1
Crimping Tool P/N: 1366656-1
Crimping Tool P/N: 1366044-1
Hand Tool
Instruction
Sheets
108-5453
501-5188
114-5206
411-5712
411-5713
411-5969
411-5976
411-5774
*
Don't fail to obtain Instruction Sheets and other appropriate papers when you adopt our products.
Safety Specifications
The following safety specifications are applicable to specific Part Numbers.
Contact Technical Support to check if approval is given for each Part Number you are using.
Note that there are instances where values differ from those given in Tyco Electronics
Performance Data.
D-5200 Series (400 mil, 10.16mm pitch) D-5200MαSeries
Voltage Rating
630V AC See preceding
page
Determined by
requirements
of equipment
in use.
Determined by
requirements of
equipment in
use.
—
600V AC
AWG
16
14
12
10
AWG
16
14
12
10
A
13
18
25
30
A
15
20
25
30
—
-30°~+105°C
600V AC
Temperature Rating
-55°~+105°C
—
—
-30°~+105°C
Temperature Rating
Specification
108-5453
UL
File No. E28476
(Recognized
Component)
CSA
Report No. LR7189
TÜV License No.
R9650368
IP Protection IP-10
Overvoltage
Classification (II)
Number of
repeated insertions
and withdrawals
allowed: 50 times.
—See preceding
page
—
Determined by
requirements of
equipment in
use.
——
4
12.5
16
19.5
24
31
37.5
46
AWG
20
18
16
14
12
10
8
1~3
12.5
17.5
21
26
33
40
48
—
Current Rating
Pos.
84
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-5200 Series (Continued)
AMP Dynamic Series Connectors
D-5000 Series
➀Insert Extraction Tool in the direction
as shown, insert into the narrow lower
section of Housing’s reverse convex hole.
(make sure that you are holding tool in
proper position, top and bottom.)
*
Take care not to insert tool into contact
section. If you’ve inserted by error,
replace the contact with a new one
before proceeding.
D-5 Contacts
Application Tooling
Crimp Type Contacts
Extraction Tool
Part Number: 409158-1
Instruction Sheet 411-5774
•How to Use Extraction Tool
Receptacle Contact
(Used in Receptacle Housing)
Tab Contact
(Used in Tab Housing)
Wire Range
AWG mm2
Ins. Dia.
Range
mm
Wire
Range
Mark
Contact Part Numbers*
Sequential Tab
Receptacle Tab
16
14
12
10
1.25
2.20
3.50
5.50
3~3.8
4~5.2
S
M
ST.
LP.
ST.
LP.
179955-❏
316040-❏
179956-❏
316041-❏
917802-❏
917804-❏
917803-❏
917805-❏
Application Tooling
Mini-Applicator Hand Tool
**
—
**
—
—
234170-1
—
234171-1
84696-1
1,—
84695-1
1—
Note: Enter the following plating code in Part Number suffix-❏:
-2 = 0.38 µm thick gold plating, -3 = 0.76µm thick gold plating,
-6 = 2.54 µm thick silver plating
*Strip Form contacts are used with Mini-Applicator and Loose-Piece contacts
are with hand tools.
**Mini-Applicator is for use on Automachines. (See next page. Contact
Technical Support for details.)
•Used to extract contacts from wire type tab / receptacle housing.
(Take care when inserting tool as the lance section of D-5 is turned upside down to that of D-3.)
•With D-5 contacts only, it is possible to extract using a small-size slotted screwdriver.
When Using D-5 Extraction Tool When Using Slotted Screwdriver
➁The tip of Extraction Tool depresses
housing lance, freeing contact.
➂Contact can now be pulled out.
➁When you butt the tip of tool at lance
section and depress it, contact is
released.
➂Contact can be pulled out.
D-5αContacts (Silver Plating)
Wire Range
AWG mm2
Ins. Dia.
Range
mm
Wire
Range
Mark
Contact Part Numbers*
Receptacle
20
16
16
14
0.50
1.25
1.25
2.20
1.8~3.23
3~3.80
SS
S
ST.
LP.
ST.
LP.
1318985-6
1318986-6
0179955-6
0316040-6
Application Tooling
Mini-Applicator
**
—
**
—
Note: The contact part numbers with "-6" are silver plated with
2.54 µm thickness. * Strip Form contacts are used with Mini-Applicator and Loose-Piece contacts
are with hand tools.
**Mini-Applicator is for use on Automachines. (See next page. Contact
Technical Support for details.)
12
10
8
3.50
5.50
8.00
4~5.2
4.9~7.8
M
L
ST.
LP.
ST.
LP.
0179956-6
0316041-6
1318696-6
1318697-6
**
—
**
—
Hand Tool
—
91596-1
—
234170-1
—
234171-1
—
1366044-1
85
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-5200 Series (Continued)
AMP Dynamic Series Connectors
D-5000 Series
Application Tooling
(Continued)
Mounting Hardware
AMP-O-LECTRIC Model G Terminating Machine
The Model "G" Terminator is the most advanced design in
the long-standing series of AMP-O-LECTRIC machines for
terminating wire using reeled terminals and contacts. It
features a reliable direct motor drive system. Its modular
construction enables it to be used either as a bench-top unit,
or in combination with fully-automatic lead-making equipment.
For operator convenience, access to and lighting in the target
area has been improved and the Crimp Quality Monitor (CQM)
has been moved to eye level for bench-top use.
The Model "G" is also quieter, plus improved guarding meets
applicable European and domestic safety requirements.
• Quieter
• Improved guarding and lighting
• Toolless changeover of applicators
• Precision manual- or auto-adjust for crimp height
• Total and batch counter
• Accepts all existing Tyco Electronics miniature applicators,
with minor modifications
• Reduced maintenance requirements
• Request Catalog 65828 for specifications and part numbers
Hand Tool
The crimping section incorporates
Straight Action construction for
improved reliability as with
automachine.
Part No.:
See the preceding page.
Minimum order quantity: 1
Mini-Applicator
Part Number: Contact Technical Support.
Minimum order quantity: 1
Attachment
Sequential Clip
Part Number: 179993-1
AMP-3K/40 and AMP-5K/40 Terminating
Machines
The AMP-3K/40 and AMP-5K/40 Terminators
are designed for customers that require the
increased output and quality of a semi-
automatic machine at a competitive price. By
incorporating the most commonly requested
features as standard and offering a long list of
optional equipment, these terminators offer
flexibility to meet the specific needs of various
applications at the lowest possible cost.
•
3,000 lb. [1361 kg] max. crimp force
(AMP-3K/40)
5,000 lb. [2268 kg] max. crimp force
(AMP-5K/40)
• Toolless removal of applicators and guards
• Jog capability
• Quiet, fast operation — 80/76 dBA and cycle time less
than 0.400 seconds
• Accepts Heavy Duty Mini style applicators
• Wide range of optional equipment such as toolless
precision crimp height adjust, batch counter, CQM
capability and work light
• Order Catalog 1654856 for specifications and part numbers
Mini-Applicator
Part Number: Contact Technical Support
Minimum order quantity: 1
86
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-5200 Series (Continued)
AMP Dynamic Series Connectors
D-5000 Series
D-5200S — Standard
1-Row Type
Appearance Board mounting pitch: 400mils (10.16mm)
Dielectric Withstanding Voltage: 3,000V (for one minute)
Voltage Rating: 630V AC
Tab Housing
(Panel Type)
Tab Housing
(Free-hanging Type)
Receptacle
Housing
Receptacle
Housing
Receptacle
Housing
Receptacle
Housing
Board-mount
Tab Header
(Horizontal Type)
Board-mount
Tab Header
(Vertical Type)
Tab Housing
(Panel Type) (Free-hanging Type)
Board-mounting Tab Header
(Horizontal Type) (Vertical Type)
Receptacle Housing
Tab Contact········For each line of contacts, refer to the appropriate pages.Receptacle Contact
X
Y
X
Y
X
Y
X
Y
X
Y
1-179958-2
2-179958-2
1-179958-3
2-179958-3
1-179958-4
2-179958-4
—
—
1-179958-6
2-179958-6
1-353047-2
2-353047-2
1-353047-3
2-353047-3
1-353046-2
2-353046-2
1-353046-3
2-353046-3
No. of
Pos.
Keying
Part Number of
Receptacle Housings
Part Number of Tab Housings
Panel Type
2
3
4
5
6
Free-hanging Type
Note: Enter the following plating code in Part Number suffix-❏
-2 = 0.38 µm thick gold plating
-3 = 0.76 µm thick gold plating
1-353079-❏
2-353079-❏
1-353081-❏
2-353081-❏
1-917541-❏
2-917541-❏
—
—
1-179959-❏
2-179959-❏
Part Number Board-mounting Tab Headers
Horizontal Type
—
—
8-350381-2
9-350381-2
8-917541-2
9-917541-2
—
—
—
—
Sequential Type
—
—
8-353082-2
9-353082-2
8-917542-2
9-917542-2
—
—
—
—
Sequential Type
1-353080-❏
2-353080-❏
1-353082-❏
2-353082-❏
1-917542-❏
2-917542-❏
—
—
1-179960-❏
2-179960-❏
Vertical Type
Use low 4- and 6-position
D-5200MS, 4- and 6-position
Panel and Free-hanging Types.
87
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-5200 Series (Continued)
AMP Dynamic Series Connectors
D-5000 Series
D-5200S — Standard
1-Row Type (Continued)
Keying
Keying is provided with this product (D-5200S) to help prevent misinsertion. Two types, X and Y, are available. (Shown below is the
mated interface of Tab Header.)
Key Rib Key Rib
X-Type Y-Type
Keying Sign Keying Sign
Application
Servomotor / servodriver—Typical Application
D-3100D
Free-hanging Type
D-5200M
Free-hanging Type
D-5200S
Board-mount
Horizontal Type
D-3100D
Board-mount
Horizontal Type
88
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-5200 Series (Continued)
AMP Dynamic Series Connectors
D-5000 Series
D-5200S — Standard
1-Row Type (Continued)
Mating Dimensions
External Dimensions
Receptacle Housing
Tab Housing
Panel Type
Free-hanging Type
Panel / Free-hanging Type Horizontal / Vertical Type
No. of
Pos.
2
3
Part Number of Tab Housing Dimensions
ABCDEF
47 38 33.44 29.36 21.11 30.4
57 48 43.6039.52 31.27 40.5
Panel Type
❏-353047-2
❏-353047-3
Free-hanging Type
❏-353046-2
❏-353046-3
No. of
Positions
Part Number of
Receptacle Housing
Dimensions
AB
35.76 23.76
45.92 33.92
53.68 44.08
— —
74.00 64.40
2
3
4
5
6
❏-179958-2
❏-179958-3
❏-179958-4
—
❏-179958-6
Panel Cutout
When mounting panel from the
front, apply clamping torque of less
than 49N [11 lbf].
Mating Tab Connector
Part Number:
❏-353047-❏
❏-353046-❏
❏-353079-❏
❏-353081-❏
❏-917541-❏
❏-179959-❏
❏-353080-❏
❏-353082-❏
❏-917542-❏
❏-179960-❏
Mating Receptacle
Housing
Part Number:
❏-179958-❏
89
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-5200 Series (Continued)
AMP Dynamic Series Connectors
D-5000 Series
D-5200S — Standard 1-Row Type (Continued)
Board-mount Tab Header (Horizontal Type)
Board-mount Tab Header (Vertical Type)
No. of
Pos.
2
3
4
5
6
Part Number of Tab Header Dimensions
ABC
29.36 22.86 10.16
39.52 33.02 20.32
49.68 43.18 30.48
— — —
70.00.00 63.50050.800
❏-353079-❏
❏-353081-❏
❏-917541-❏
—
❏-179959-❏
PC Board Layout
Applicable Board
Thickness:
1.6-2.4±0.1
Tube Package Dimensions (Ref.)
No. of
Pos.
2
3
4
5
6
Part Number
Standard Type Sequential Type
Dimensions
AB C
29.36 22.86 10.16
39.52 33.02 20.32
49.68 43.18 30.48
— — —
70.00.00 63.50050.800
❏-353080-❏
❏-353082-❏
❏-917542-❏
—
❏-179960-❏
—
❏-353082-2*1
❏-917542-2*1
—
—
PC Board Layout
Applicable Board
Thickness: 1.6-2.4±0.1
Tube Package Dimensions (Ref.)
Standard Type
Mating Receptacle Housing
Part Number:
❏-179958-❏
Mating Receptacle Housing
Part Number:
❏-179958-❏
Sequential Type
*1 In the of the sequential type, enter 8- for X type, and enter 9- for Y type.
*2 For the 3 pos. connector assembly, the sequential post is inserted in the circuit No. 3.
For the 4 pos. connector assembly, the sequential post is inserted in the circuit No. 4.
90
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-5200 Series (Continued)
AMP Dynamic Series Connectors
D-5000 Series
D-5200M — Modular Type
D-5200M—Can be used for modular application in conjunction with D-5200S.
Also used for power distribution.
Board mounting pitch: 400x400mils (10.16x10.16mm)
Dielectric Withstanding Voltage: 3,000V (for one minute)
Voltage Rating: 630V AC (when one connector is used)
Tab Housing
(Panel Type)
Tab Housing
(Free-hanging Type)
Receptacle
Housing
Receptacle
Housing
Receptacle
Housing
Receptacle
Housing
Tab Housing
(Panel Type) (Free-hanging Type)
Board-mounting Tab Header
(Horizontal Type)
Receptacle Housing
Tab Contact········For each line of contacts, refer to the appropriate page.
Receptacle Contact
XX
YY
XY
XX
YY
XY
XX
1-917807-2
2-917807-2
3-917807-2
1-917807-3
2-917807-3
3-917807-3
—
1-917809-2
2-917809-2
3-917809-2
1-917809-3
2-917809-3
3-917809-3
—
1-917808-2
2-917808-2
3-917808-2
1-917808-3
2-917808-3
3-917808-3
—
1-1123309-❏
2-1123309-❏
3-1123309-❏
—
—
—
1123829-1*
No. of
Pos. Keying Part Number of
Receptacle Housings
Part Number of Tab Housing
Panel Type
4
6
8
Free-hanging Type
Note: Enter the following plating code in Part Number suffix-❏:
-2 = 0.38 µm thick gold plating
-3 = 0.76 µm thick gold plating
*This connector is made by 2 pieces of 4 pos. connectors.
Board-mounting Tab Header
Horizontal Type
8-1123309-2
9-1123309-2
5-1123309-2
—
—
—
—
Sequential Type
4 Pos.
8 Pos.
Board-mount
Tab Header
(Horizontal Type)
Board-mount
Tab Header
(Horizontal Type)
91
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-5200 Series (Continued)
AMP Dynamic Series Connectors
D-5000 Series
D-5200M — Modular Type
(Continued)
Keying
Keying is provided with this product (D-5200M) to help prevent misinsertion. Three types, XX, YY, and XY, are available.
(Shown below is the mated interface of Tab Header.)
Table of Mating Combinations
Key Rib
XX-Type
Key Rib
YY-Type
Key Rib
XY-Type
Keying Sign Keying Sign Keying Sign
Receptacle Housing
1 Row
(D-5200S)
2 Row
X-Type
Y-Type
XX-Type
YY-Type
XY-Type
Tab Housing Board-mount
Tab Header
1 Row
(D-5200S)
Panel Type
Free-hanging Type
1 Row
(D-5200S)
Horizontal Type
Vertical Type
Free-hanging Type
Panel Type
2 Rows
Vertical Type
Horizontal Type
2 Rows
X-Type
Panel Type
Free-hanging
Type
Y-Type
Panel Type
Free-hanging
Type
XX-Type
Panel Type
Free-hanging
Type
YY-Type
Panel Type
Free-hanging
Type
XY-Type
Panel Type
Free-hanging
Type
*
D-5200S Series
*
*
**
X-Type
Horizontal
Type
Vertical Type
Y-Type
Horizontal
Type
Vertical Type
XX-Type
Horizontal
Type
Vertical Type
YY-Type
Horizontal
Type
Vertical Type
XY-Type
Horizontal
Type
Vertical Type
*
92
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-5200 Series (Continued)
AMP Dynamic Series Connectors
D-5000 Series
D-5200M — Modular Type
(Continued)
Mating Dimensions
Receptacle Housing
Tab Housing
Panel Type
Free-hanging
Type
Panel / Free-hanging Type Horizontal Type (When used as modular unit) Vertical Type (When used as modular unit)
No. of
Pos.
4
6
Part Number of Tab Housing Dimensions
AB CD E F
47 38 33.44 29.36 21.11 30.40
57 48 43.60 39.52 31.27 40.50
Panel Type
❏-917809-2
❏-917809-3
Free-hanging Type
❏-917808-2
❏-917808-3
No. of
Positions
Part Number of
Receptacle Housing
Dimensions
AB
33.36 23.76
43.52 33.92
4
6
❏-917807-2
❏-917807-3
Panel Cutout
When mounting panel from the front,
apply clamping torque of less than
49N [11 lbf].
Mating Tab Connector
Part Number:
❏-917809-❏
❏-917808-❏
1123829-1
❏-1123309-❏
Mating Receptacle
Housing
Part Number:
❏-917807-❏
93
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-5200 Series (Continued)
AMP Dynamic Series Connectors
D-5000 Series
D-5200M — Modular Type
(Continued)
Board-mount Tab Header (Horizontal Type)
No. of
Pos.
4
Part Number of Tab Header Dimensions
ABC
29.36 22.86 10.16
❏-1123309-❏
Board-mount Tab Header (Horizontal Type)
No. of
Pos.
8
Part Number of Tab Header Dimensions
ABC
49.68 43.18 30.48
1123829-1
PC Board Layout
Applicable Board
Thickness:
1.6-2.4±0.1
PC Board Layout
Applicable Board
Thickness:
1.6-=2.4±0.1
Mating Receptacle
Housing
Part Number:
❏-917807-❏
Mating Receptacle
Housing
Part Number:
❏-917807-❏
94
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-5200 Series (Continued)
AMP Dynamic Series Connectors
D-5000 Series
D-5200Mα— High Current
Type
Appearance Board mounting pitch: 400mils (10.16mm)
Dielectric Withstanding Voltage: 3,000V (for one minute)
Voltage Rating: 630V AC
D-5 M
Receptacle Contact, refer to the appropriate pages
Receptacle
Housing
Board-mount
Tab Header
(Horizontal Type)
Receptacle Housing Board-mount Tab Header
(Horizontal Type)
X
Y
XX
YY
XY
No. of
Pos. Keying
2
4
* The 2 pos. receptacles use same 2 pos. housing of D-5200S Series.
The 4 pos. receptacles use same 4 pos. housing of D-5200M Series.
The contacts, however, are D-5α(Silver plated type).
1-179958-2
2-179958-2
1-917807-2
2-917807-2
3-917807-2
Part Number of
Receptacle Housings
—
—
1-1318983-6
2-1318983-6
3-1318983-6
Part Number of Board-mounting
Tab Headers (Horizontal Type)
Part Number Chart
Keying
Keying is provided with this product (D-5200Mα) to help prevent misinsertion. Three types, XX, YY, and XY, are available.
95
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-5200 Series (Continued)
AMP Dynamic Series Connectors
D-5000 Series
1-917807-2
2-917807-2
3-917807-2
Dimensions
AB
35.76 23.76
D-5200Mα— High Current
Type (Continued)
Mating Dimensions
Receptacle Housing (2 Pos.)
External Dimensions
No. of
Positions
Part Number of
Receptacle Housing
2
Keying
X
Y
1-179958-2
2-179958-2
Dimensions
AB
33.36 23.76
No. of
Positions
Part Number of
Receptacle Housing
4
Keying
XX
YY
XY
53.0
45.0
Horizontal Type
31.0
(When used as modular unit)
53.0
45.0
31.0
BB
A
A
B
A
10.16
A
B
9.8
21.2
29
21
2
1
Y
D-5
Receptacle Housing (4 Pos.)
29
19.96
A
B
21
21
D-5
X-X
Mating Tab Header
Part Number:
❏-1318983-❏
Mating Tab Header
Part Number:
❏-1318983-❏
96
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-5200 Series (Continued)
AMP Dynamic Series Connectors
D-5000 Series
D-5200Mα— High Current
Type (Continued)
Board-mount Tab Header (Horizontal Type)
10.16
22.56
10.16
16.66
29.36 30.86
Tab Contact
4.58
22.56
4.9
45
Round
2-Ø4MIN
2-Ø3
8-Ø1.8
Header Outline
AB
D-5200
D/C
Row No.
1
2
45
3.8
27.94
3.34
10.16
2.54
Circuit No.
±0.5
4.55
±0.5
16.66
±0.5
1.95
±0.5
10.16
±0.5
2.54
±0.5
17.78
±0.5
10.16
PC Board Layout
Applicable Board
Thickness: 1.6p2.4w0.1
1-1318983-6
2-1318983-6
3-1318983-6
No. of
Positions
Part Number of
Tab Header
4
Keying
XX
YY
XY
Mating Receptacle Housing
Part Number:
❏-179958-❏
❏-917807-❏
97
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
DZ-5200 Series (Board-to-Board)
AMP Dynamic Series Connectors
D-5000 Series
DZ-5200 Series
High-current board-to-
board connectors with
30A per contact are useful
for cableless control
boards.
Material and Finish
Receptacle Contact — Phosphor
bronze or copper alloy, gold plated with
1.27 µm nickel underplate
Tab Contact — Phosphor bronze or
copper alloy, gold plated with 1.27 µm
nickel underplate
Tab Post — Copper alloy, tin plated
and gold plated with 1.27 µm nickel
underplate
Housing — Glass filled polyester
(PBT), UL 94V-0
Performance Characteristics
*When connectors are used singly
Pitch — 5.08mm/10.16mm
Voltage Rating —
5.08mm pitch: 250 V (rms);
10.16mm pitch: 600 V (rms)
Current Rating —
5.08mm pitch: 20A;
10.16mm pitch: 30A
Contact Resistance — 10 mΩmax.
Dielectric Withstanding Voltage —
1,500 V (1 minute)
Operating Temperature —
-55°C ~ +105°C
Technical Documents
Product Specification
108-78186
Receptacle Header Mating Tab Header
Part Number:
❏-1747145-❏
No. of
Pos.
3
4
5
7
Pitch
mm
Dimensions
AB
30.76 24.56
40.92 34.72
30.76 24.56
40.92 34.27
10.16
5.08
Part Number
5-1747147-3
5-1747147-4
1-1747147-5
1-1747147-7
98
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
DZ-5200 Series (Continued)
AMP Dynamic Series Connectors
D-5000 Series
DZ-5200 Series (Continued)
Tab Header
Mating Receptacle Header
Part Number:
❏-1747147-❏
No. of
Pos.
3
4
5
7
Pitch
mm
Dimensions
AB
28.76 24.86
38.92 35.02
28.76 24.86
38.92 35.02
10.16
5.08
Part Number
5-1747145-3
5-1747145-4
1-1747145-5
1-1747145-7
PC Board Layout
Acceptable Board Thickness: 1.6
99
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-5300 Series (Wire-to-Panel and Wire-to-Wire)
AMP Dynamic Series Connectors
D-5000 Series
D-5300 Series
Reverse Mount Type
Material and Finish
Receptacle Contact — Copper alloy,
gold plated or silver plated over nickel
underplate
Tab Contact — Copper alloy, gold
plated or silver plated over nickel
underplate
Housing — Glass filled polyester
(PBT), UL 94V-0
Performance Characteristics
*When connectors are used singly
Pitch — 400 mil (10.16mm)
Voltage Rating — 630 VAC
Current Rating —
#10: 30A; #12: 25A; #16: 16A
Contact Resistance —2mΩmax.
Dielectric Withstanding Voltage —
3,000 V (1 minute)
Operating Temperature —
-55°C ~ +105°C
Related Product Data
D-5 Contact (Refer to page 84)
Reverse mount type
allows Dynamic Series
receptacle contact to be
used on panel mount side.
The Dynamic D-5300 Series
supports receptacle contact
storage demand to conduc-
tor housing and such appli-
cations where safety
standards are important.
The receptacle contact sat-
isfies the IP20 rating, which
contributes to equipment
safety. Plus, a new addition
to the lineup are long tab
contacts so contact is made
in advance when mating
and retains current until
completely unmated.
Also, because it uses the
D-5000 Series high-current
contacts, which have a good
reputation in industry, it not
only keeps costs for new
equipment to a minimum, it
also really helps to shorten
initial evaluation times.
100
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-5300 Series (Continued)
AMP Dynamic Series Connectors
D-5000 Series
D-5300 Series (Continued)
55.0 55.0
47.047.0
22.0
32.0
D-5300S
D-5300D
Keying
This product (D-5300) is
provided with keying to help
prevent mismating of the
connector halves. Keying is
available in five types—X
Type, Y Type, XX Type, YY
Type and XY Type.
AB
47
C
A
47
B
C
10.16
No. of
Pos.
3
4
Keying Dimensions
ABC
46.48 12.46 32.68
46.48 12.46 32.68
33.84 22.62 22.46
33.84 22.62 22.46
33.84 22.62 22.46
X
Y
XX
YY
XY
Part Number
1-1747819-3
2-1747819-3
1-1747820-2
2-1747820-2
3-1747820-2
Mating Dimensions
Tab Housing
Panel Mount Type
Dimensions
Panel/Free-hanging Type
Panel Cutout
A
B
10.16
E
C
47
A
B
10.16
E
C
47 4
5
F
R0.5MAX
D
B
Ø3.6±0
No. of
Pos.
3
4
Keying Dimensions
ABCDEF
57 48 22 41.1 18.16 16.8
57 48 22 41.1 18.16 16.8
47 38 32 30.6 28.32 26.9
47 38 32 30.6 28.32 26.9
47 38 32 30.6 28.32 26.9
X
Y
XX
YY
XY
Part Number
1-1747821-3
2-1747821-3
1-1747822-2
2-1747822-2
3-1747822-2
Receptacle Housing
101
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMP Dynamic with HTS Connectors (Wire-to-Panel and Wire-to-Wire)
AMP Dynamic Series Connectors
AMP Dynamic with HTS Connectors
2800/3800 Series Material and Finish
Receptacle Contact — Phosphor
bronze or copper alloy, gold plated with
1.27 µm nickel underplate
Tab Contact — Phosphor bronze or
copper alloy, gold plated with 1.27 µm
nickel underplate
Housing — Glass filled polyester
(PBT), UL 94V-0
Performance Characteristics
Voltage Rating —
D-2800 Series: 250 V;
D-3800 Series: 600 V
Current Rating —
D-2800 Series: 5A (#18 AWG);
D-3800 Series: 15A (#16 AWG)
Contact Resistance — 10 mΩmax.
Dielectric Withstanding Voltage —
1,500 V (1 minute)
Operating Temperature —
-55°C ~ +105°C
Technical Documents
Product Specifications
108-78284
108-78285
Application Specifications
114-5258
114-5148
This Series is a
combination of the proven
HTS series rectangular
connectors and the
popular Dynamic Series
connector line.
Metal hoods and frames of
HTS connectors, which
offers many choices
depending on sizes and
mounting styles are
employed. Sizes and num-
ber of positions can be
selected to meet the appli-
cation needs. It is also suit-
able for high-current appli-
cations.
Sequential terminals are
available to enable termina-
tion with automatic crimping
machines. Termination time
can be substantially
reduced.
Approximately 30% higher
density mounting is possi-
ble compared to the high
density HTS connectors.
Contact Contacts of proven Dynamic Series, as well as the existing
special tools and applicators, can continue to be used.
Receptacle Contact
(Used in Receptacle Housing)
Tab Contact
(Used in Tab Housing)
D-3 Contact
D-2 Contact
Receptacle Contact
(Used in Receptacle Housing)
Tab Contact
(Used in Tab Housing)
102
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMP Dynamic with HTS Connectors (Wire-to-Panel and Wire-to-Wire) (Continued)
AMP Dynamic Series Connectors
AMP Dynamic with HTS Connectors
Receptacle Housing
Mating Tab Housing
Part Number:
1747366-1
Tab Housing
2800 Series
No. of Part Number
Pos.
301747365-1
Mating Receptacle Housing
Part Number:
1747365-1
No. of Part Number
Pos.
30 1747366-1
103
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMP Dynamic with HTS Connectors (Wire-to-Panel and Wire-to-Wire) (Continued)
AMP Dynamic Series Connectors
AMP Dynamic with HTS Connectors
Receptacle Housing
Mating Tab Housing
Part Number:
1747364-1
Tab Housing
3800 Series
No. of Part Number
Pos.
121747363-1
Mating Receptacle Housing
Part Number:
1747363-1
No. of Part Number
Pos.
12 1747364-1
104
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMP Dynamic with HTS Connectors (Wire-to-Panel and Wire-to-Wire) (Continued)
AMP Dynamic Series Connectors
AMP Dynamic with HTS Connectors
Frames and Metal Housings
Size 3 (1 Module Type)
Part Number: 1108784-1
Frame Applicable Metal Housing
Refer to HTS Catalog 889745-2
Refer to HTS Catalog 889745-2
Size 4 (2 Module Type)
Part Numbers:
1108783-1 (Male)
1108783-2 (Female)
Refer to HTS Catalog 889745-2
Size 6 (3 Module Type)
Part Numbers:
1108782-1 (Male)
1108782-2 (Female)
Refer to HTS Catalog 889745-2
Size 8 (4 Module Type)
Part Numbers:
1108780-1 (Male)
1108780-2 (Female)
Refer to HTS Catalog 889745-2
105
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMP Dynamic with HTS Connectors (Wire-to-Panel and Wire-to-Wire) (Continued)
AMP Dynamic Series Connectors
AMP Dynamic with HTS Connectors
Cable Fittings
Plastic Type
Gland fitting IP 68 plastic
PG DSW Designation Part Number
Min. Max.
11 5 10 22 HUT.11.P 1-1106005-7
13.5 6 12 24 HUT.13.P 2-1106005-7
16 10 14 27 HUT.16.P 3-1106005-7
21 13 18 33 HUT.21.P 4-1106005-7
29 18 25 42 HUT.29.P 5-1106005-7
36 22 32 53 HUT.36.P 6-1106005-7
42 32 38 60 HUT.42.P 7-1106005-7
Metr. DSW Designation Part Number
Min. Max.
M16 4820 HUT.M16.P 1-1102771-6
M20 6 12 24 HUT.M20.P 2-1102771-0
M25 10 14 29 HUT.M25.P 2-1102771-5
M32 13 18 36 HUT.M32.P 3-1102771-2
M40 18 25 46 HUT.M40.P 4-1102771-0
M50 22 32 55 HUT.M50.P 5-1102771-0
PG DSW Designation Part Number
Min. Max.
11 5 10 20 HUT.11.MS 1-110606-9
13.5 6 12 22 HUT.13.MS 2-1106006-9
16 10 14 24 HUT.16.MS 3-1106006-9
21 13 18 30 HUT.21.MS 4-1106006-9
29 18 25 40 HUT.29.MS 5-1106006-9
36 22 32 50 HUT.36.MS 6-1106006-9
42 32 38 57 HUT.42.MS 7-1106006-9
Metr. DSW Designation Part Number
Min. Max.
M16 5 10 17 HUT.M16.P 1-1102770-6
M20 6 12 22 HUT.M20.P 2-1102770-0
M25 13 18 27 HUT.M25.P 2-1102770-5
M32 18 25 34 HUT.M32.P 3-1102770-2
M40 22 32 43 HUT.M40.P 4-1102770-0
M50 32 38 55 HUT.M50.P 5-1102770-0
Metal Type
Gland fitting IP 68 brass,
nickel plated neoprene
sealing insert and O-ring
at connection thread.
Note: Variable options are available other than those listed above. Please refer to HTS Catalog 889745-2.
106
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Power Connector for Board-to-Board Application
AMP Dynamic Series Connectors
Power Connector — Board-to-Board
Can be used for tab contact connection.
Besides, board can be directly inserted into this connector.
Material & Finish
Current Rating 20A
Operating Temperature -55˚C ~ +85˚C
Housing: Glass-filled thermoplastic, blue
Contact: Copper alloy, plated gold (1.27 µm
thick) on contact area and tin on post area
Tab Contact: Brass, 1.27 µm plated gold
Insertions and Extractions 30 times
Ground Module
Application
Tab Contact
Part Number
119341-1
Part Number
175145-2
Tab Contact
Ground
Module
107
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Power Connector for Board-to-Board Application (Continued)
AMP Dynamic Series Connectors
Power Connector — Board-to-Board
Part Number
119341-1
Part Number
175145-2
Mating Dimensions
Ground Module
Tab Contact
External Dimensions
108
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Dyna-Tap Connectors (Wire-to-Panel and Wire-to-Wire)
AMP Dynamic Series Connectors
Dyna-Tap Connectors
Many pieces of FA
equipment are produced by
assembling sub-units with
divided functions in the final
assembly line. Power for
each sub-unit of conven-
tional equipment is
branched from the power
supply bus line over a
printed circuit board. In
order to save valuable
printed circuit board space,
Tyco Electronics has
developed Dyna-Tap
Connectors from which
power can be tapped
without printed circuits.
Dyna-Tap Connectors are a
part of Dynamic Series,
which are developed as
power supply connectors.
Dyna-Tap Connectors are
optimized for branching
power from the power sup-
ply bus line.
In order to cope with three
power systems, which are
the most popular in the
industry, 6-position connec-
tors are specified.
Product Lineup
Free-hanging type and
panel mount type are
available. The part number
of the mating connector is
1-178288-6.
Applications
■Power taps in elevator
towers
■Power taps for power
protective relays
■Power taps among sub-
units of semiconductor
producing equipment
■Power supplies for
equipment on production
lines
Performance Characteristics
Voltage Rating — 250 VAC
Current Rating — 8A (18-position,
with AWG#14)
Position — 6 pos. x 3 = 18 pos.
Durability — 500 cycles
Technical Document
Product Specification
108-5754
Product Facts
■As many Dyna-Tap
Connectors will be fixed on
casings where dust
protection will be needed,
dust covers are incorporated
into the design. With the
dust cover, this connector
can be applied in various
environments
109
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Dyna-Tap Connectors (Wire-to-Panel and Wire-to-Wire) (Continued)
AMP Dynamic Series Connectors
Dyna-Tap Connectors
Mating Dimensions
Tab Housings
(18-Position)
Free-Hanging Type
Part Number 1376807-1
Panel Mount Type
Part Number 1376807-2
Mating Receptacle Housing
(6-Position)
Part Number 1-178288-6
Panel Cutout
When mounting panel from the front,
apply clamping torque of less than
49N [11 lbf].
Caution:
Dynamic Series contacts are available
either with gold plating or tin plating.
However, Dyna-Tap Contacts are only
available with 0.38 µm thick gold plating.
Mating gold plated contacts with tin
plated contacts will cause electrolytic
corrosion. Therefore, please choose
gold plated contacts for the mating
Dyna-Tap Connectors.
110
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Dyna-Tap Connectors (Wire-to-Panel and Wire-to-Wire) (Continued)
AMP Dynamic Series Connectors
Dyna-Tap Connectors
D-3000 Series
D-3200 Series Dyna-Tap
24P (4P x 6 Row)
D-3200 4P common series
are lined up in six rows.
Issues about branching
maintenance and cost are
handled with connectors.
The Dynamic Series power
supply tap is known for its
superior contact reliability.
Compared to a terminal
block it is possible to
reduce installation and
maintenance costs. Also,
because the circuits are
electronically commoned,
circuit board and connector
do not need to be mounted.
This leads to reductions in
number of components and
man hours as well as an
overall decrease in costs.
Material and Finish
Receptacle Contact — Copper alloy,
plated gold or tin over nickel underplate
D-3 Contact — Copper alloy, plated
gold or tin over nickel underplate
Tab Post — Copper alloy, plated
0.38 µm gold or 2.0 µm tin over 1.3 µm
nickel underplate
Housing — Glass filled polyester
(PBT), UL 94V-0
Performance Characteristics*
Pitch — 200 mil (5.08 mm)
Voltage Rating — 600 VAC
Current Rating —
24-position: 10 A Max.
Contact Resistance — 10 mΩMax.
Dielectric Withstanding Voltage —
2,200 VAC (1 minute)
Operating Temperature —
-55°C ~ +105°C
*When connectors are used singly.
Related Product Data
D-3 Contact (Refer to page 101)
111
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Dyna-Tap Connectors (Wire-to-Panel and Wire-to-Wire) (Continued)
AMP Dynamic Series Connectors
Dyna-Tap Connectors
D-3200 Series Dyna-Tap
24P (4P x 6 Row) ((CCoonnttiinnuueedd))
Mating Dimensions
Dimensions
Receptacle Housing
Tab Housing
Panel Mount Type
Free-hanging Type
Panel/Free-hanging Type
Panel Cutout
No. of Part Number Dimensions
Pos. ABC
31-178128-3 29.70 24.10 19.24
No. of Plating Part Number Dimensions
Pos. Panel Mount Type Free-hanging Type ABC
24 0.38 µm Gold 1827691-2 1827691-1 47.45 38.1 29.24
2.0 µm Tin 1-1827691-2 1-1827691-1
112
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Dyna-Clamp Kit (Wire-to-Board, Wire-to-Panel and Wire-to-Wire)
AMP Dynamic Series Connectors
Dyna-Tap Connectors
Product Lineup
This 3-position connector
was developed from the
Dynamic Connector 5200 as
its basis to realize low-cost
30 A class power distribution
for FA equipment. The exist-
ing contacts can be used,
which means the existing
production method such as
crimping tools or automatic
machines can be utilized
without any change.
Support for Obtaining UL,
TÜV Approvals
It is more favorable to
obtain UL and TÜV
approvals with this connec-
tor than with metal connec-
tors because of the
following reasons:
Made of Plastic
Because of the plastic con-
nector, ground wire at
power supply is not neces-
sary. This simplifies wirings
of FA equipment and leads
to lowering the total cost.
Sequential Structure
A sequential structure is
designed so that the ground
wire is always electrically
connected before power
lines.
Performance Characteristics
Voltage Rating — 6300 VAC
Current Rating — 30 A
Position — 3 pos.
Durability —
With 0.38 µm contact: 50 cycles
With 0.76 µm contact: 100 cycles
Applications
■Power supply I/Os
among sub-units of
semiconductor producing
equipment
■Power supply I/Os for
control panels
■Power supply I/Os for
power control panels
■Power supply I/Os for
robots
Most connectors mounted
outside of many pieces of
FA equipment are made of
metal because of their
robustness. Connectors
made of metal have a very
high performance level.
However, connectors
made of metal are more
costly than connectors
made of plastics.
Tyco Electronics has
added a cable clamp
function to the existing
Dynamic Series. With
this new design, the
robustness of Dynamic
Series connectors made
of plastic has been
improved remarkably.
This lower cost connector
can contribute to the total
cost reduction of end
products.
The ground mark is
embossed on the
connector housing so
that operators can see it.
Ground
113
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Dyna-Clamp Kit (Wire-to-Board, Wire-to-Panel and Wire-to-Wire) (Continued)
AMP Dynamic Series Connectors
Dyna-Tap Connectors
Mating Connectors
Panel/Free-hanging Type Horizontal/Vertical Type
Cable Kit
Part Number 1473668-1
Rec. Sub Assy.
Cover Housing
Cable Clamp
Small Screw M3⫻⫻10
Tab Housing
(Panel Type) (Free-hanging Type)
Board Mounting Tab Header
(Horizontal Type) (Vertical Type)
Tab Contact...............For each line of contacts, refer to the appropriate page
No. of Part Number of Tab Housing Board Mounting Tab Header
Pos. Panel Type Free-hanging Type Horizontal Type Vertical Type
31-353047-3 1-353046-3 1-353081-❏1-353082-❏
Note: Enter the following plating codes in -
❏
after Part Numbers:
-2 = 0.38 µm thick gold plating, -3 = 0.76 µm thick gold plating
114
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Part Number Index (Continued)
AMP Dynamic Series Connectors
Part Number Index
Part Number Index
917804 84
917805 84
917807 90, 92-96
917808 90, 92
917809 90, 92
1102770 105
1102771 105
1106005 105
1106006 105
1108780 104
1108782 104
1108783 104
1108784 104
1123309 90, 92, 93
1123624 69
1123829 90, 92, 93
1318095 73, 74, 75
1318105 19
1318106 19
1318107 19
1318108 19
1318109 19
1318110 19
1318111 19
1318112 19
1318114 24, 26
1318115 24, 26
1318116 20, 22
1318117 20, 22
1318118 24, 26, 27
1318119 24, 26, 27
1318120 20, 22, 23
1318123 20, 22, 23
1318124 24, 26, 27
1318125 24, 26, 27
1318126 24, 26, 27
1318127 24, 26, 27
1318577 28-30
1318578 28, 29, 31
1318579 28-30
1318696 84
1318697 84
1318983 94-96
1318985 84
1318986 84
1376009 24, 26, 27
1376020 24, 26, 27
1376059 28, 30
1376072 28, 29, 31
1376073 28, 31
1376133 73-75
1376135 20, 22, 23
1376136 24, 26, 27
1376137 24, 26, 27
1376807 109
1473074 20, 22, 23
1473668 113
1717412 49, 50, 51
1747145 97, 98
1747147 97, 98
1747276 79, 80
1747277 79, 80
84695 84
84696 84
119341 106, 107
175145 106, 107
175194 38
175195 38
175196 38
175216 38
175217 38
175218 38
175284 38
175285 38
175286 38
175287 38
175288 38
175289 38
175362 73, 74, 75
175363 73, 74, 75
175365 73, 74, 75
176346 76, 77
177555 73, 75
177555 74
177648 43, 45
177662 47, 48
177665 47, 48
177988 47
178127 52-55
178128 56, 58-61, 69, 111
178129 62, 64, 65
178136 56, 58, 59
178137 52-55
178138 56, 58, 59
178139 62, 64-68
178140 62, 64-68
178141 52, 53-55
178214 70-72
178216 70-72
178288 43, 45-48, 53, 109
178289 49-51
178293 43, 45, 46, 53
178294 43, 45, 46
178295 43, 45, 46
178296 43, 45, 46
178297 43, 45, 46
178298 43, 45, 46
178303 49-51
178304 50
178305 49-51
178306 49-51
178307 49-51
178308 49-51
178313 43, 45, 46, 53
178314 43, 45, 46
178315 43, 45, 46
178316 43, 45, 46
178317 43, 45, 46
178318 43, 45, 46
178323 49-51
178324 50
178325 49-51
178326 49-51
178327 49-51
Part No. Page
178328 49-51
178802 43, 45
178803 49, 50
178964 49, 50
179129 64
179188 47, 48
179276 56, 58, 59
179277 56, 58, 59
179552 56, 58
179553 56, 58
179554 62, 64, 66, 67
179555 62, 64, 66, 67
179955 84
179956 84
179958 86, 88, 89, 94-96
179959 86, 88, 89
179960 86, 88, 89
179993 85
316040 84
316041 84
316080 62, 64, 65
316081 62, 64, 65
316130 56, 58, 59
316131 56, 58, 59
316132 56, 58, 59
316133 56, 58, 59
316516 73-75
316517 73-75
350381 86
353046 86, 88, 113
353047 86, 88, 113
353079 86, 88, 89
353080 86, 88, 89
353081 86, 88, 89, 113
353082 86, 88, 89, 113
353715 38
353716 38
353717 38
353718 38
900121 42
900128 42
900167 28, 30, 66
917226 67
917241 73, 74
917242 73, 74
917249 70-72
917251 70-72
917266 66-68
917337 56, 58, 59
917338 56, 58, 59
917389 60, 61
917484 38
917485 38
917511 38
917512 38
917541 86, 88, 89
917542 86, 88, 89
917657 62, 64, 65
917658 62, 64, 65
917659 62, 64, 65
917802 84
917803 84
Part No. Page
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Part No. Page
115
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Part Number Index (Continued)
AMP Dynamic Series Connectors
Part Number Index
1747363 103
1747364 103
1747365 102
1747366 102
1747414 79
1747415 78
1747416 78
1747418 78
1747419 78
1747498 78
1747499 78
1747500 78
1747501 78
1747535 79
1747819 100
1747820 100
1747821 100
1747822 100
1747994 24, 26, 27
1827538 33
1827540 33
1827569 7
1827570 7
1827571 7
Part No. Page
1827572 7
1827579 14
1827581 14
1827583 15
1827586 7
1827587 7
1827588 7
1827589 7
1827691 111
1827862 8
1827863 8
1827864 12
1827872 9
1827873 9
1827875 12
1827876 13
1871056 9
1871057 8
1871303 7
1871304 7
1871315 9
1871465 10
1871468 10
1871673 13
Part No. Page
1871731 7
1871743 7
1871744 7
1871745 7
1903111 7
1903112 7
1903113 7
1903114 7
1903115 7
1903116 7
1903117 7
1903118 7
1903120 7
1903121 7
1903122 7
1903124 7
1903125 7
1903126 7
1903127 8
1903128 8
1903129 11
1903130 13
1903131 13
Part No. Page
Application Tooling Part Number Index
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
58571 39
91558 38
91559 38
91560 38
91561 38
91565 38
91576 18, 19
91595 18, 19
91596 83, 84
175855 41
234168 41
234170 83, 84
234171 83, 84
Part No. Page
234172 37
409158 84
919041 41
919600 37
919601 37
919602 37
1366044 83, 84
1366656 83
1762119 78
1762120 78
1762129 78
1762130 78
1762625 7
Part No. Page
1762626 7
1762846 7
1762847 7
1762950 7
1762951 7
1762952 7
1762953 7
1891033 7
1891035 7
1891036 7
1891037 7
Part No. Page
AMP Dynamic Series Connectors
116
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Engineering Notes
AMP Dynamic Series Connectors
117
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Engineering Notes
AMP Dynamic Series Connectors
118
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Engineering Notes
1242132–7.5M–LUG–FP–5-07 Tyco Electronics Corporation
Printed in the U.S.A. www.tycoelectronics.com
Global Contacts
Americas
Argentina – Buenos Aires
Phone: +54-11-4733-2200
Fax: +54-11-4733-2211
Brasil – São Paulo
Phone: +55-11-3611-1311
Fax: +55-11-3611-0397
Canada – Toronto
Phone: +905-475-6222
Fax: +905-474-5520
Product Information Center:
(Technical Support)
Phone: +905-470-4425
Fax: +905-474-5525
Colombia – Bogota
Phone: +57-1-231-9398
Fax: +57-1-660-0206
Mexico – Mexico City
Phone: +52-55-1106-0800
+01-800-733-8926
Fax: +52-55-1106-0901
United States – Harrisburg, PA
Phone: +717-564-0100
Fax: +717-986-7575
Product Information Center:
(Technical Support)
Phone: +800-522-6752
Fax: +717-986-7575
For Latin/South American
Countries not shown
Phone: +54-11-4733-2015
Fax: +54-11-4733-2083
Asia/Pacific
Australia – Sydney
Phone: +61-2-9554-2600
Fax: +61-2-9502-2556
Product Information Center:
(Technical Support)
Phone: +61-2-9840-8200
Fax: +61-2-9634-6188
India – Bangalore
Phone: +91-80-285-40800
Fax: +91-80-285-40820
Indonesia – Jakarta
Phone: +65-6482-0311
Fax: +65-6482-1012
Japan – Toyko
Phone: +81-44-844-8111
Fax: +81-44-812-3207
Product Information Center:
(Technical Support)
Phone: +81-44-844-8013
Fax: +81-44-812-3200
Korea – Seoul
Phone: +82-2-3415-4500
Fax: +82-2-3486-3810
Malaysia – Kuala Lumpur
Phone: +60-3-78053055
Fax: +60-3-78053066
New Zealand – Auckland
Phone: +64-9-634-4580
Fax: +64-9-634-4586
Philippines – Makati City
Phone: +632-848-0171
Fax: +632-867-8661
People’s Republic of China
Hong Kong
Phone: +852-2735-1628
Fax: +852-2735-0243
Shanghai
Phone: +86-21-2407-1588
Fax: +86-21-2407-1599
Taiwan – Taipei
Phone: +886-2-8768-2788
Fax: +886-2-8768-2268
Singapore – Singapore
Phone: +65-6482-0311
Fax: +65-6482-1012
Thailand – Bangkok
Phone: +66-2-955-0500
Fax: +66-2-955-0505
Vietnam and Indochina –
Ho Chi Minh City
Phone: +84-8 930-5546
Fax: +84-8 930-3443
Europe/Middle East/Africa
Austria – Vienna
Phone: +43-1 90 5 60-0
Fax: +43-1 90 5 60-1333
Belgium – Kessel-Lo
Phone: +32-16-35-23-00
Fax: +32-16-35-23-52
Bulgaria – Sofia
Phone: +359-2-971-2152
Fax: +359-2-971-2153
Czech Republic – Kurim
Phone: +420-5-41-162-111
Fax: +420-5-41-162-223
Denmark – Glostrup
Phone: +45-43-480-452
Fax: +45-43-441-414
Egypt – Cairo
Phone: +20-2-29 04 281
Fax: +20-2-41 92 334
Estonia – Tartu
Phone: +372-5138-274
Fax: +372-7400-779
Finland – Helsinki
Phone: +358-95-12-34-20
Fax: +358-95-12-34-250
France – Cergy-Pontoise
Phone: +33-1-3420-8888
Fax: +33-1-3420-8600
Product Information Center:
(Technical Support)
Phone: +33-1-3420-8943
Fax: +33-1-3420-8623
Germany – Bensheim
Phone: +49-6251-133-0
Fax: +49-6251-133-1600
Product Information Center:
(Technical Support)
Phone: +49-6251-133-1999
Fax: +49-6251-133-1988
Germany – Langen
Phone: +49-6103-709-0
Fax: +49-6103-709-1223
Germany – Speyer
Phone: +49-6232-30-0
Fax: +49-6232-30-2243
Germany - HTS Division – Neunkirchen
Phone: +49-2247-305-0
Fax: +49-2247-305-122
Greece – Athens
Phone: +30-210-9370-396/397
Fax: +30-210-9370-655
Hungary – Budapest
Phone: +36-1-289-1000
Fax: +36-1-289-1010
Ireland – Dublin
Phone: +353-1-820-3000
Fax: +353-1-820-9790
Israel – Yokneam
Phone: +972-4-959-0508
Fax: +972-4-959-0506
Italy – Collegno (Torino)
Phone: +39-011-4012-111
Fax: +39-011-4031116
Lithuania – Vilnius
Phone: +370-5-2131-402
Fax: +370-5-2131-403
Netherlands – ’s-Hertogenbosch
Phone: +31-73-624-62-46
Fax: +31-73-621-23-65
Product Information Center:
(Technical Support)
Phone: +31-73-6246-999
Fax: +31-73-6246-998
Norway – Nesbru
Phone: +47-66-77-8886
Fax: +47-66-77-8855
Poland – Warsaw
Phone: +48-22-45-76-700
Fax: +48-22-45-76-720
Romania – Bucharest
Phone: +40-21-311-3479/3596
Fax: +40-21-312-0574
Russia – Moscow
Phone: +7-495-926-5506/07/08/09
Fax: +7-495-926-5505
Russia – St. Petersburg
Phone: +7-812-718-8192
Fax: +7-812-718-8193
Slovenia – Ljubljana
Phone: +386-1561-3270
Fax: +386-1561-3240
South Africa – Port Elizabeth
Phone: +2741-503-4500
Fax: +2741-581-0440
Spain – Barcelona
Phone: +34-93-291-0330
Fax: +34-93-201-7879
Product Information Center:
(Technical Support):
Phone: +34-93-291-0330
Fax: +34-93-200-3779
Sweden – Upplands Väsby
Phone: +46-8-50-72-50-00
Fax: +46-8-50-72-50-01
Switzerland – Steinach
Phone: +41-71-447-0447
Fax: +41-71-447-0444
Turkey – Istanbul
Phone: +90-212-281-8181/2/3
Fax: +90-212-281-8184
Ukraine – Kiev
Phone: +380-044-206-2265
Fax: +380-044-206-2264
United Kingdom – Swindon
Phone: +44-8706-080-208
Fax: +44-1793-572-516
Product Information Center:
(Technical Support)
Freephone GB: 0800-267-666
Phone: +44-8706-080-208
Fax: +44-208-420-8081
For Middle East/African Countries
Not Shown
Phone: +33-1-3420-8866
Fax: +33-1-3420-8300
Tyco Electronics Corporation
Harrisburg, PA
tycoelectronics.com
1242132–7.5M–LUG–FP–5-07
AMP Dynamic Series
Connectors
Catalog 1242132 Revised 5-07 AMP Dynamic Series Connectors
