ZED-TC-CCELL-H2/N - NEWPORT ELECTRONICS

W-51

Temperature/humidity

or barometric pressure/

temperature probe

included with

zED-THP-P.

U Web Server

U Alarms by Email or Text Message

U No Special Software Required

U High Power—1 Kilometer Range

U NEMA 4 (IP65) Enclosure

U Low Power Option

zCDR shown smaller

than actual size. For

more information, visit

omega.com

wi833-ZT meter controller/

coordinator shown

smaller than actual size.

For more information, visit

omega.com

Lug mount

probe

included with

zED-TP2-P.

EXTERNAL PROBES

Meter-Controller/Coordinator

Stick probe

included with

zED-TP1-P.

Inputs Available:

• Temperature

• Barometric Pressure

• Humidity

• Dual Thermocouple

• Analog Voltage or Current

The rugged high-performance, high power OMEGA®

wiSeries wireless sensor/transmitter system

provides Web-based monitoring of Analog

Voltage and Current, Temperature, Humidity

and Barometric Pressure.

The radio is a high power IEEE 802.15.4 compliant

transmitter operating at 2.4 GHz designed to

transmit over greater distances and through more

obstructions than the standard transmitter.

These wireless sensors transmit 1000 m (3280')—

without obstructions or interferences— to a zCDR

coordinator or wi8/wiDR meter-controller. The

coordinators and controllers connect directly to an

Ethernet network and the Internet and serve active

Web Pages to display and chart the data.

You can monitor and record analog voltage

and current, temperature, relative humidity, and

barometric pressure over an Ethernet network or

the Internet without any special software—just your

Web Browser.

These wireless sensors are designed for demanding

industrial applications indoors and harsh outdoor

environments. The electronics are protected in a

rugged weatherproof polycarbonate NEMA 4 (IP65)

rated housing. The rugged industrial sensors are

supplied with 3 m (10') of cable.

High Power Wireless Transmitters

Ethernet or Internet Connection

zED Series

zED-TC-LCD-DC-H2

shown smaller than

actual size.

zED-THP-LCD

shown smaller

than actual size.

Optional

W-52

Wireless Transmitters

Wireless transmitters are available with external probes

appropriate for an almost unlimited variety of industrial

and commercial applications.

OMEGA offers a selection of end devices for a

variety of applications. The high power end device

supports one external sensor. The external sensors

are designed for harsh environments such as outdoor

weather, in HVAC ducts, in freezers and refrigerators.

The high power end devices run on either AC power,

low voltage power, or batteries. The AC version (zED-P,

zED-LCD) is powered by a 5 Vdc universal AC power

adapter that operates on any voltage worldwide (110 to

240 Vac). Should AC power fail, the unit can operate on

a 3.6V ultra-long-life lithium back-up battery (included).

A low power option (zED-DC) operates at 10 to 30 Vdc,

or 24Vac. The completely wireless End Devices are

CCELL) alkaline batteries. These End Devices can

operate for weeks, months, or years before changing

the batteries. Battery life depends on the type of sensor

and other user settings such as the frequency of

transmission.

Alarm and Email

The zSeries wireless sensor system can trigger

an alarm if variables go above or below a set point

that you determine. Your alarm can be sent by

email to a single user or to a group distribution list,

including text messages to cell phones and PDAs.

The OMEGA “MailNotiﬁer” software is a free and

easy program for this application.The meter-controller

connects directly to an Ethernet Network or the

Internet. Unlike an RS232 or USB device, it does

not require a host computer.

Embedded Web Server

The wireless sensor system is easy to install, simple

to operate, and features OMEGA’s award-winning

iServer technology with an Embedded Web Server that

requires no special software.

Charts and Graphs

The zSeries system serves Active Web Pages to

display real time readings and charts of Analog Voltage

and Current, Temperature, Humidity, and Barometric

Pressure. You can also log data in standard data

formats for use in a spreadsheet or data acquisition

program such as Excel or Visual Basic.

OMEGA offers a free and easy to use program for

logging data to Excel. The virtual chart viewed on the

web page is a JAVA™ Applet that records a chart

over the LAN or Internet in real time. With the OMEGA

zSeries system there is no need to invest time and

money learning a proprietary software program to log

or chart the data. Chart scales are fully adjustable on

the ﬂy. For example, the chart can display one minute,

one hour, one day, one week, one month or one year.

Temperature and humidity can be charted across the

full span [-40 to 125°C (-40 to 257°F), and 0 to 100% RH]

Internet

Enabled!

Speciﬁcations

Relative Humidity

Accuracy/Range (zED-THP-x, zED-BTHP-x): ±2% for

10 to 90%; ±3% for 5 to 10% and 90 to 95%; ±4% for 0 to 5%

and 95 to 100%

Hysteresis: ±1% RH

Non-Linearity: ±3%

Repeatability: ±0.1%

Resolution: 0.1%

Temperature

Accuracy/Range zED-TP1-x, zED-TP2-x:

±0.5°C for 10 to 85°C (±0.9°F for 50 to 185°F);

±1°C for -40 to 10°C and 85 to 125°C

(±1.8°F for -40 to 50°F and 185 to 257°F)

zED-THP-x, zED-THP2-x:

±0.5°C for 5 to 45°C (±0.9°F for 41 to 113°F);

up to ±1.5°C for -40 to 5°C and 45 to 124°C

(up to ±2.7°F for -40 to 41°F and 113 to 255°F)

ZED-BTHP-x: ±0.5°C for 5 to 45°C (±0.9°F for 41 to 133°F)

up to ±1.5°C for -40 to 5°C and 45 to 85°C

(up to ±2.7°F for -40 to 41°F and 113 to 185°F)

zED-BTP-x:

±0.8°C @ 20°C (±1.5°F @ 68°F); ±2°C for

40 to 85°C (±3.6°F for -40 to 185°F)

Repeatability: ±0.1°C for zED-THP-x, zED-BTHP-x

Resolution: 0.1°C

Barometric Pressure

Accuracy/Range (zED-BTP-x, zED-BTHP-x): ±2 mbar for

10 mbar to 1100 mbar (1 KPa to 110 KPa)

Resolution: 0.1 mbar

Probe Speciﬁcations

Industrial Probe (zED-BTP-x, -BTHP-x, zED-THP-x):

SS 316 housing, 137 x Ø16 mm (5 x Ø0.63")

(zED-THP2-x): SS 316 housing 78 x Ø16 mm (3.1 x Ø0.63")

Stick Probe (zED-TP1-x): ABS tubing, 152.4 x Ø6.35 mm

(6 x Ø0.25")

Lug Mounted Probe (zED-TP2-x): Copper tubing,

53.4 x Ø7.92 mm (2.1 x Ø0.312"); mounting hole Ø4.72 mm

(Ø0.186")

Cable:

zED-TP1-x, -TP2-x, zED-THP-x: 3 m (10') L x Ø2.62 mm

(0.103"); -80 to 200°C (-112 to 392°F)

zED-BTP-x, -BTHP-x: 3 m (10') L x Ø4.45 mm (0.175");

-55 to 105°C (-67 to 221°F) ø = diameter

Thermocouple Input

Temperature Accuracy/Range: Refer to T/C chart, on next page

Temperature Stability: 0.08°C/°C

Temperature Coefﬁcient: ±25 ppm/°C

Thermocouple Cold End Tracking: 0.1°C/°C

Thermocouple Lead Resistance: 100 Ω maximum

Thermocouple Type (ITS 90): J, K, T, E, R, S, B, C, N, L (DIN J)

Warm-Up to Rated Accuracy: 30 minutes

Analog Input

Voltage Input: Differential; bipolar; ±100 mV, ±1V, ±10V

Input Impedance: 400 kΩ for voltage

Current Input: Differential; bipolar; ±20 mA (5 Ω load)

Accuracy: ±1% full range @ 25°C

Reading Rate: Periodic (1 sample/update) or continuous

(20 samples/second)

A/D Conversion: Sigma-Delta

Resolution: 16-bits

Temperature Coefﬁcient: ±50 ppm/°C

or within any narrow range such as [20 to 30°C

(68 to 86°F)]. OMEGA offers an OPC Server software

that makes it easy to integrate the zSeries wireless

sensor system with many popular Data Acquisition and

Automation programs offered by OMEGA, Wonderware,

iConics, Intellution, Rockwell Automation, and National

Instruments, among others.

Common Mode Rejection: 105 dB

Normal Mode Rejection: 98 dB

Warm-Up to Rated Accuracy: 30 minutes

Wireless Communication

Standard: IEEE 802.15.4, DSSS

Frequency: 2.4 GHz (2400 to 2483.5 MHz), 16 channels

Network Topology: Star topology

Range: Up to 1000 m (3280’) without obstructions or

interference

Power (zED-x-P, zED-x-LCD)

Power Input: 5 Vdc

Consumption: 0.8 W maximum

Safety Qualiﬁed AC Power

Adaptor (Included):

Nominal Output: 5 Vdc @ 0.6 A

Input: 100 to 240 Vac, 50/60 Hz

Operating Temperature: 0 to 40°C

(32 to 104°F)

Lithium Back-up Battery: One 3.6 Vdc (included)

Lifetime: Estimate of 2 years with

frequency of 1 reading per 2 minutes

(7 months with -TC option,

8 months with -VI)

Power (zED-x-DC-H2)

Power Input: 10 to 30 Vdc, or 24 Vac ±10%

Consumption: 1.5 W maximum

Isolation Dielectric per 60 Seconds: 1000 Vdc

W-53

Dimensions: mm (inch)

ø = diameter

Universal AC

adaptor is

included with all

AC powered

models.

Thermocouple Chart

Input Type Range Accuracy

Iron - Constantan

-210 to 760°C (-346 to 1400°F) 0.4°C (0.7°F)

-270 to -160°C/-160 to 1372°C 1.0°C/0.4°C

CHROMEGA

- ALOMEGA

(-454 to -256°F/-256 to 2502°F) (1.8°F/0.7°F)

-270 to -190°C/-190 to 400°C 1.0°C/0.4°C

Copper - Constantan

(-454 to -310°F/-310 to 752°F) (1.8°F/0.7°F)

-270 to -220°C/-220 to 1000°C 1.0°C/0.4°C

CHROMEGA

- Constantan

(-454 to -364°F/-364 to 1832°F) (1.8°F/0.7°F)

-50 to 40°C/40 to 1768°C 1.0°C/0.5°C

Pt/13%Rh-Pt

(-58 to 104°F/104 to 3214°F) (1.8°F/0.9°F)

-50 to 100°C/100 to 1768°C 1.0°C/0.5°C

Pt/10%Rh-Pt

(-58 to 212°F/212 to 3214°F) (1.8°F/0.9°F)

100 to 640°C/640 to 1820°C 1.0°C/0.5°C

Pt/30%Rh-Pt/6%Rh

(212 to 1184°F/1184 to 3308°F) (1.8°F/0.9°F)

5%Re-W/26%Re

0 to 2320°C (32 to 4208°F) 0.4°C (0.7°F)

-250 to -100°C/-100 to 1300°C 1.0°C/0.4°C

Nicrosil - Nisil

(-418 to -148°F/-148 to 2372°F) (1.8°F/0.7°F)

J DIN

-200 to 900°C (-328 to 1652°F) 0.4°C (0.7°F)

82.0 (3.23)

51.97

(2.046)

39.7

(1.56)

15.0

(0.59)

5.99

(0.236)

135.8 (5.35)

123.77 (4.873)

3.56 (0.140)

4 PLCS

TOP VIEW

(COVER REMOVED)

107.7 (4.24)

gland

25 (1.0)

57.2

(2.25)

44.5

(1.75)

QUICK

DISCONNECT

CONNECTORS

CABLE

GLAND

(earlier

version)

1 CABLE

GLAND

zED-THP-CCELL/-DCELL/-LCD-AA

zED-TP1-CCELL/-DCELL/-LCD-AA

zED-TP2-CCELL/-DCELL/-LCD-AA

zED-BTP-CCELL/-DCELL/-LCD-AA

zED-BTHP-CCELL/-DCELL/-LCD-A

zED-TC-CCELL

zED-TC-LCD-AA

2 CABLE

GLANDS QUICK

DISCONNECT

CONNECTOR

zED-THP2-CCELL-H

zED-THP2-LCD-AA-H

(mounting pattern same as vertical models)

QUICK

SENSOR

DISCONNECT

CONNECTOR

ANTENNA

78.1

(3.08)

15.9 (0.63) DIA

zED-THP2-CCELL-H

zED-THP2-

LCD-AA-H

110.0 (4.33)

zED-TP1-DC-H2

zED-TP2-DC-H2

zED-THP-DC-H2

zED-THP2-DC-H2

zED-BTP-DC-H2

zED-BTHP-DC-H2

zED-TP1-LCD-DC-H2

zED-TP2-LCD-DC-H2

zED-THP1-LCD-DC-H2

zED-THP2-LCD-DC-H2

zED-BTP-LCD-DC-H2

zED-BTHP-LCD-DC-H2

zED-TC-H2

zED-VI-DC-H2

50.8 (2.00)

146.3 (5.76)

(SHOWN WITH COVER REMOVED)

QUICK

DISCONNECT

CONNECTOR

ANTENNA

DC POWER

GLAND CONNECTOR

M12

104.2 (4.10)

9.1 (0.36)

Ø3.56 (0.140) 4 PLCS

FOR #6 SCREW

96.5 (3.80)

78.3 (3.08)

25.4 (1.00)

2.25 (57.1)

CABLE GLAND

CONNECTORS

zED-TP2-LCD-DC-H2

zED-VI-LCD-DC-H2

Power (zED-x-CCELL)

Alkaline Battery: Two C-cell 1.5 Vdc (included)

Lifetime: Estimate of 5 years with

frequency of 1 reading per 2 minutes

Environmental

Operating Temperature:

zED-x-P; zED-x-DC-H2: -20 to 70°C (-4 to 158°F), 90%

RH non-condensing

zED-x-CCELL: -18 to 55°C (-0.4 to 131°F), 90% RH

non-condensing

zED-x-LCD-x: -10 to 60°C (14 to 140°F),

90% RH non-condensing

Packaging

Enclosure Material: Polycarbonate

Enclosure Protection: NEMA 4 (IP65)

Enclosure Dimensions: 135.9 L x 82 W x 39 mm D

(5.35 x 3.23 x 1.56")

General

Agency Approval: FCC Part 15C; CE EMC; 2004/108/EC,

LVD 2006/95/EC, RTT&E 1999/5/EC, SRRC

Software: iConnect (conﬁguration software for the Ethernet

interface), iLog (Excel-based software for automatic data

logging), and Mail Notiﬁer (email alarm notiﬁcation software)

W-54

Note: Because of transmission frequency regulations, these products may only be used in the US, Canada, Europe, and China.

2 type K thermocouples with 1m of 24 AWG PFA insulated wire with stripped lead termination included with -TC models.

For the meter/controllers, other output options are available, please contact our Sales Department.

Comes complete with software, 2 C-cell batteries, or AC power adaptor, and operator’s manual.

Ordering Examples: Two zED-TP2-P high power end devices with external temperature sensor in lug mounting probe housing and 3 m (10') cable,

and zCDR, coordinator.

CAL-3-HU, NIST traceable calibration certiﬁcate for new unit.

Calibration Description

CAL-3-HU NIST traceable calibration certiﬁcate; three humidity points: 25%, 50%, 75%, 1 temperature

point of 25°C (for new units)

CAL-3-HU-P-T NIST traceable calibration certiﬁcate; three humidity, barometric pressure, and temperature

points (for new units)

CAL-3-P NIST traceable calibration certiﬁcate; three barometric pressure points, and temperature 25°C

(for new units)

CT485B-CAL-KIT Calibration kit, 33% and 75% RH standards

High Power Wireless

Transmitters

A complete wireless system requires at least: 1 end device (zED-x, zED-x-P, zED-x-LCD, zED-x-DC,

or zED-x-CCELL) and 1 coordinator or meter/controller receiver (zCDR, wi8xx-ZT, or wiDRxx-ZT).

To Order Visit omega.com/zed-p_series for Pricing and Details

Model No. Description

Wireless End Device

zED-TP1-P Temperature sensor with stick probe, AC powered

zED-THP-P Temperature and humidity sensor, AC powered

zED-TC-P Dual thermocouple input, AC powered

zED-TP2-LCD Temperature sensor with lug mount probe, AC powered, LCD display

zED-THP-LCD Temperature and humidity sensor, AC powered, LCD display

zED-TC-LCD Dual thermocouple input, AC powered, LCD display

zED-VI-LCD Analog input, AC powered, LCD display

zED-THP-CCELL-H Temperature and humidity sensor, battery powered, horizontal case

zED-THP2-CCELL-H Short probe with temp and humidity sensor, battery powered, horizontal case

zED-BTP-CCELL-H Barometric pressure and temp sensor, battery powered, horizontal case

zED-BTHP-CCELL-H Barometric pressure, temp and humidity sensor, battery powered, horizontal case

zED-TC-CCELL-H Dual thermocouple input, battery powered, horizontal case

zED-THP-LCD-CCELL-H Temperature and humidity sensor, battery powered, LCD display, horizontal case

zED-THP2-LCD-CCELL-H Short probe with temp and humidity sensor, battery powered, LCD display, horizontal case

zED-TC-LCD-CCELL-H Dual thermocouple input, battery powered, LCD display, horizontal case

zED-THP-DC-H2 Temperature and humidity sensor, low voltage powered, horizontal case

zED-TC-DC-H2 Dual thermocouple input, low voltage powered, horizontal case

zED-THP-LCD-DC-H2 Temperature and humidity sensor, low voltage powered, LCD display, horizontal case

zED-TC-LCD-DC-H2 Dual thermocouple input, low voltage powered, LCD display, horizontal case

zED-VI-LCD-DC-H2 Analog input, low voltage powered, LCD display, horizontal case

Wireless Coordinator and Meter/Controller/Coordinator (Receivers)

zCDR Coordinator, which can support up to 32 end devices (any zED type except zED-VI)

zCDR-VI Coordinator, which can support up to 32 analog input only end devices

wi833-ZT Meter/controller, which can support up to 8 temperature only end devices, with 2 relays:

Form “C” SPDT 3 A @ 120 Vac, 3 A @ 240 Vac, embedded Ethernet, 90 to 240 Vac, 50/60 Hz

wi853-ZT Meter/controller, supports up to 8 temperature only end devices, with analog output

0 to 10 Vdc or 0 to 20 mA @ 500 Ω max and Form “C” SPDT 3 A @ 120 Vac, 3 A @ 240 Vac,

embedded Ethernet, 90 to 240 Vac, 50/60 Hz

wiDR22-ZT DIN rail monitor/controller, supports up to 8 temperature only end devices, with 2 solid state

relays (SSRs): 0.5 A @ 120/240 Vac continuous, embedded Ethernet, 90 to 240 Vac, 50/60 Hz

wiDR44-ZT-DC DIN rail monitor/controller, supports up to 8 temperature only end devices, with 2 pulsed 10 Vdc

@ 20 mA (for use with external SSR), embedded Ethernet, low power option 12 to 36 Vdc, 24 Vac