Product Page: Fast Flash Disk (FFD) 2.5 Inch IDE Plus Monday, Feb. 16, 2004 IDE/SCSI Family Products IDE Selection Guide printer friendly version Documentation 256MB to 47.1GB disk capacity Customization 2.5" standard form factor with case height from 8.5mm to 34.2mm ATA-3 with DMA 0-2 and PIO 0-4 transfer modes 16.7 MBytes/sec burst read/write rate FFD IDE Plus Brochure 8.3-8.7 MBytes/sec sustained read rate (DMA 2) 8.0-12.0 MBytes/sec sustained write rate (DMA 2) Quick security erase in seconds Sanitize confidential data, comply with NISPOM DoD 5220.22M, NSA 130-2,Air Force AFSSI 5020, Army 380-19 and Navy NAVSO P-5239-26 TrueFFS(R) technology >5,000,000 Write/Erase cycles, unlimited Read Enhanced endurance by dynamic wear-leveling SMART (Self-Monitoring, Analysis and Reporting Technology) Data integrity under unstable power conditions MIL-STD 810F and NEBS Level 3 compliant 5 Year Warranty For additional information please contact ffd@m-systems.com Overview M-Systems' Fast Flash Disk (FFD) 2.5" IDE Plus disk is a state-of-the-art solid-state disk, based on NAND flash technology, that provides the functionality of a hard disk with no moving parts. FFD 2.5" IDE Plus is an ideal, rugged storage solution for mission-critical applications that must operate under harsh environmental conditions. FFD2.5" IDE Plus delivers outstanding reliability and enhanced endurance thanks to M-Systems' TrueFFS(R) technology, which applies dynamic wear-leveling and bad block management. Due to its unique design, FFD 2.5" IDE Plus eliminates seek time, latency and other electro-mechanical delays inherent in conventional disk drives. High-performance sustained read and write rates (up to 8.7MB/sec and 12.0 MB/sec with DMA, respectively) support both DMA 0-2 and PIO 0-4 transfer modes. FFD 2.5" IDE Plus is fully compatible with the ATA-3 interface, and has the same mechanical dimensions and mounting holes of traditional mechanical disks. It is a true drop-in replacement for rotating ATA http://www.m-sys.com/Content/Products/product.asp?pid=26 (1 of 4)2/16/2004 11:09:37 AM Product Page: Fast Flash Disk (FFD) 2.5 Inch IDE Plus disks with higher reliability. M-Systems' family of FFDs has been providing rugged, mass storage solutions to an expansive range of industries since 1997. In air force, navy and army installations, it has been field-tested inside data recorders, moving maps, sonar, radar, fire control systems, black boxes, data acquisition systems, C4ISR, telemetry systems, rugged laptops and servers. In telecommunication systems, the FFD product line is used within optical and ATM switches, IP gateways, wireless base stations and core routers, providing NEBS level 3 compliance, top reliability and a maintenance-free solution. Top reliability and high MTBF make FFD 2.5" IDE Plus an ideal choice for Factory Automation (FA) systems, Point Of Sales (POS) systems, assembly and robot controllers, and within manufacturing and medical systems. Specifications Capacity Unformatted 256, 512, 1024, 2048, 3072, 4096, 5120, 6144, 7168, 8192, 9216, 10240, 12288, (MBytes) 14336, 16384, 18432, 20480, 22528, 24576, 26624, 28672, 30720, 32768, 34816, 36864, 38912, 40960, 43008, 45056, 47104 IDE Compatibility ANSI-X3.298-1997 (ATA-3); ANSI-X3.279-1996 (ATA-2) Performance Burst Read/Write: 16.7 MBytes/sec DMA-2 transfer mode: Sustained Read: 8.3-8.7 MBytes/sec (up to 13MB/s with customize s/w) Sustained Write: 8.0-12.0 MBytes/sec PIO-4 transfer mode: Sustained Read: 7.3-7.6 MBytes/sec (r/w sector or multi 16 commands) Sustained Write: 7.7-10.1 MBytes/sec (r/w sector or multi 16 commands) Access time: <0.04 ms Physical Form factor: 2.5" Mounting: Industry standard, 44 pins connector Case dimensions:(mm): 100.2(L) X 69.8(W) X 8.5 to 34.2(H) Weight: 0.1 Kg for 2GB; 0.38 Kg for 47GB Environmental Operating temperature Commercial: 0C to +70C Enhanced: -25C to +75C Extended: -40C to +85C Storage temperature: -55C to +95C Humidity: 5% to 95% relative, non-condensing Operating altitude: Up to 80,000 feet Operating shock: 1,500G, MIL-STD-810F Operating vibration: 16.3G RMS (random, 20Hz to 2000Hz; 3 vibration axes), MIL-STD-810F Power Input voltage: 5VDC (4.75-5.25V range) Typical power consumption for 10GB unit Standby mode: http://www.m-sys.com/Content/Products/product.asp?pid=26 (2 of 4)2/16/2004 11:09:37 AM 320mA (1.6 W) Product Page: Fast Flash Disk (FFD) 2.5 Inch IDE Plus Idle mode: 450mA (2.2 W) Sustained read/write: 550mA (2.6 W) Sanitize secure erase/fill mode: 590mA (2.9 W) Compliance CE, UL, EN 55022 Class B, CISPR 22 Class B, AS/NZS 3548 Class B, BSMI CNS 13438 Class B, CAN/CSAV-3/2001.04 (VCCI), FCC Part 15 Class B, EN 61000-3-2, EN 61000-3-3, IEC 61000-4-2/3/4/5/6/8/11, MIL-STD-810F Reliability MTBF: 1,804,403 hours MTBF for 1.0 GB 1,019,576 hours MTBF for 3.0 GB Based on Telcordia SR-332, GB, 25C EDC/ECC Embedded EDC/ECC, based on 48-bit Reed Solomon Algorithm BER (Bit Error Rate) <10-20 Reliability features Built-in power-up self-test (BIT) Manual and automatic self-diagnostics TrueFFS(R) bad block management Data integrity under power-cycling SMART (Self-Monitoring, Analysis and Reporting Technology) remote monitoring of disk endurance and reliability Endurance Unlimited Read cycles >5,000,000 Write/Erase cycles TrueFFS(R) dynamic wear-leveling Garbage collection process >10 years' data retention User Interface & Configuration Interface: 16-bit Master/Slave mode: Jumper-selectable Write protect : Jumper-setting ATA transfer modes: PIO 0-4 and DMA 0-2 Firmware upgrade: Field upgrade capability Format: Factory low-level format Drivers: None required Indicators: Green access LED Enhanced Security Erase Entire disk security erase: 6-120 sec (depending on capacity) Sanitize complies with NISPOM DoD 5220.22-M, NSA 130-2, Air Force AFSSI 5020, Army 380-19, Navy NAVSO P-5239-26 Secure erase/sanitize software interrupt, hardware interrupt optional Auto-resume security erase/sanitize on power interrupt Partial security erase LED indication for secure erase/sanitize Warranty 5 years (longer warranty period can be supported) Customization PCB conformal coating Customizing case dimensions Higher disk capacities http://www.m-sys.com/Content/Products/product.asp?pid=26 (3 of 4)2/16/2004 11:09:37 AM Product Page: Fast Flash Disk (FFD) 2.5 Inch IDE Plus Hardware-interrupt quick security erase Read/write rate customization Manufactured in the USA (approved for FMF) Ordering Information FFD-25-IDEP-CCCCC-T-H CCCCC: 256, 512, 1024, 2048, 3072, 4096, 5120, 6144, 7168, 8192, Unformatted capacity 9216, 10240, 12288, 14336, 16384, 18432, 20480, 22528, (MB) 24576, 26624, 28672, 30720, 32768, 34816, 36864, 38912, 40960, 43008, 45056, 47104 T: Operating temperature range Blank - Commercial: N - Enhanced: X - Extended: 0C to +70C -25C to +75C -40C to +85 C H: Case Height (mm) A- 8.5mm up to 2.0GB B- 11.3mm up to 10.2GB C- 14.5mm up to 16.3GB D - 18.5mm up to 22.5GB F- 26.6mm up to 34.8B H - 34.2mm up to 47.1GB For additional information regarding FFD please contact ffd@m-systems.com Back to top (c) 2004 M-Systems. All rights reserved | Terms of Use & Trademarks http://www.m-sys.com/Content/Products/product.asp?pid=26 (4 of 4)2/16/2004 11:09:37 AM