FFD-25-IDEP-10240-A - M-Systems - Datasheet.Directory

  Monday, Feb. 16, 2004
printer friendly version     
 
256MB to 47.1GB disk capacity
2.5" standard form factor with case height from 8.5mm to 
34.2mm
ATA-3 with DMA 0-2 and PIO 0-4 transfer modes
16.7 MBytes/sec burst read/write rate
8.3-8.7 MBytes/sec sustained read rate (DMA 2)
8.0-12.0 MBytes/sec sustained write rate (DMA 2)
Quick security erase in seconds
Sanitize confidential data, comply with NISPOM DoD 5220.22-
M, NSA 130-2,Air Force AFSSI 5020, Army 380-19 and Navy 
NAVSO P-5239-26
TrueFFS® technology
>5,000,000 Write/Erase cycles, unlimited Read
Enhanced endurance by dynamic wear-leveling
SMART (Self-Monitoring, Analysis and Reporting Technology)
Data integrity under unstable power conditions
MIL-STD 810F and NEBS Level 3 compliant
5 Year Warranty
For additional information please contact ffd@m-systems.com 
Overview
M-Systems' Fast Flash Disk (FFD) 2.5" IDE Plus disk is a state-of-the-art solid-state disk, based on 
NAND flash technology, that provides the functionality of a hard disk with no moving parts. FFD 2.5" 
IDE Plus is an ideal, rugged storage solution for mission-critical applications that must operate under 
harsh environmental conditions. 
FFD2.5" IDE Plus delivers outstanding reliability and enhanced endurance thanks to M-Systems' 
TrueFFS® technology, which applies dynamic wear-leveling and bad block management. Due to its 
unique design, FFD 2.5" IDE Plus eliminates seek time, latency and other electro-mechanical delays 
inherent in conventional disk drives. High-performance sustained read and write rates (up to 8.7MB/sec 
and 12.0 MB/sec with DMA, respectively) support both DMA 0-2 and PIO 0-4 transfer modes. 
FFD 2.5" IDE Plus is fully compatible with the ATA-3 interface, and has the same mechanical dimensions 
and mounting holes of traditional mechanical disks. It is a true drop-in replacement for rotating ATA 
Product Page: Fast Flash Disk (FFD) 2.5 Inch IDE Plus
http://www.m-sys.com/Content/Products/product.asp?pid=26 (1 of 4)2/16/2004 11:09:37 AM
IDE/SCSI Family
Products
IDE Selection Guide
Documentation
Customization
 
FFD IDE Plus 
Brochure 

Product Page: Fast Flash Disk (FFD) 2.5 Inch IDE Plus

disks with higher reliability.

M-Systems' family of FFDs has been providing rugged, mass storage solutions to an expansive range of

industries since 1997. In air force, navy and army installations, it has been field-tested inside data

recorders, moving maps, sonar, radar, fire control systems, black boxes, data acquisition systems,

C4ISR, telemetry systems, rugged laptops and servers. In telecommunication systems, the FFD product

line is used within optical and ATM switches, IP gateways, wireless base stations and core routers,

providing NEBS level 3 compliance, top reliability and a maintenance-free solution. Top reliability and

high MTBF make FFD 2.5" IDE Plus an ideal choice for Factory Automation (FA) systems, Point Of Sales

(POS) systems, assembly and robot controllers, and within manufacturing and medical systems.

Specifications

Capacity

Unformatted

(MBytes) 256, 512, 1024, 2048, 3072, 4096, 5120, 6144, 7168, 8192, 9216, 10240, 12288,

14336, 16384, 18432, 20480, 22528, 24576, 26624, 28672, 30720, 32768, 34816,

36864, 38912, 40960, 43008, 45056, 47104

IDE Compatibility

ANSI-X3.298-1997 (ATA-3); ANSI-X3.279-1996 (ATA-2)

Performance

Burst Read/Write: 16.7 MBytes/sec

DMA-2 transfer mode:

Sustained Read: 8.3-8.7 MBytes/sec (up to 13MB/s with customize s/w)

Sustained Write: 8.0-12.0 MBytes/sec

PIO-4 transfer mode:

Sustained Read: 7.3-7.6 MBytes/sec (r/w sector or multi 16 commands)

Sustained Write: 7.7-10.1 MBytes/sec (r/w sector or multi 16 commands)

Access time: <0.04 ms

Physical

Form factor: 2.5"

Mounting: Industry standard, 44 pins connector

Case dimensions:(mm): 100.2(L) X 69.8(W) X 8.5 to 34.2(H)

Weight: 0.1 Kg for 2GB; 0.38 Kg for 47GB

Environmental

Operating temperature

Commercial: 0°C to +70°C

Enhanced: -25°C to +75°C

Extended: -40°C to +85°C

Storage temperature: -55°C to +95°C

Humidity: 5% to 95% relative, non-condensing

Operating altitude: Up to 80,000 feet

Operating shock: 1,500G, MIL-STD-810F

Operating vibration: 16.3G RMS (random, 20Hz to 2000Hz;

3 vibration axes), MIL-STD-810F

Power

Input voltage: 5VDC (4.75-5.25V range)

Typical power consumption for 10GB unit

Standby mode: 320mA (1.6 W)

http://www.m-sys.com/Content/Products/product.asp?pid=26 (2 of 4)2/16/2004 11:09:37 AM

Product Page: Fast Flash Disk (FFD) 2.5 Inch IDE Plus

Idle mode: 450mA (2.2 W)

Sustained read/write: 550mA (2.6 W)

Sanitize secure erase/fill mode: 590mA (2.9 W)

Compliance

CE, UL, EN 55022 Class B, CISPR 22 Class B, AS/NZS 3548 Class B, BSMI CNS 13438 Class B, CAN/CSA-

V-3/2001.04 (VCCI), FCC Part 15 Class B, EN 61000-3-2, EN 61000-3-3, IEC 61000-4-2/3/4/5/6/8/11,

MIL-STD-810F

Reliability

MTBF: 1,804,403 hours MTBF for 1.0 GB

1,019,576 hours MTBF for 3.0 GB

Based on Telcordia SR-332, GB, 25°C

EDC/ECC Embedded EDC/ECC, based on 48-bit Reed Solomon Algorithm

BER (Bit Error Rate) <10-20

Reliability features

Built-in power-up self-test (BIT)

Manual and automatic self-diagnostics

TrueFFS® bad block management

Data integrity under power-cycling

SMART (Self-Monitoring, Analysis and Reporting Technology) remote monitoring of disk

endurance and reliability

Endurance

Unlimited Read cycles

>5,000,000 Write/Erase cycles

TrueFFS® dynamic wear-leveling

Garbage collection process

>10 years' data retention

User Interface & Configuration

Interface: 16-bit

Master/Slave mode: Jumper-selectable

Write protect : Jumper-setting

ATA transfer modes: PIO 0-4 and DMA 0-2

Firmware upgrade: Field upgrade capability

Format: Factory low-level format

Drivers: None required

Indicators: Green access LED

Enhanced Security Erase

Entire disk security erase: 6-120 sec (depending on capacity)

Sanitize complies with NISPOM DoD 5220.22-M, NSA 130-2, Air Force AFSSI 5020, Army 380-19, Navy

NAVSO P-5239-26

Secure erase/sanitize software interrupt, hardware interrupt optional

Auto-resume security erase/sanitize on power interrupt

Partial security erase

LED indication for secure erase/sanitize

Warranty

5 years (longer warranty period can be supported)

Customization

PCB conformal coating

Customizing case dimensions

Higher disk capacities

http://www.m-sys.com/Content/Products/product.asp?pid=26 (3 of 4)2/16/2004 11:09:37 AM

Product Page: Fast Flash Disk (FFD) 2.5 Inch IDE Plus

Hardware-interrupt quick security erase

Read/write rate customization

Manufactured in the USA (approved for FMF)

Ordering Information

FFD-25-IDEP-CCCCC-T-H

CCCCC:

Unformatted capacity

(MB)

256, 512, 1024, 2048, 3072, 4096, 5120, 6144, 7168, 8192,

9216, 10240, 12288, 14336, 16384, 18432, 20480, 22528,

24576, 26624, 28672, 30720, 32768, 34816, 36864, 38912,

40960, 43008, 45056, 47104

T: Operating temperature range

Blank - Commercial: 0°C to +70°C

N - Enhanced: -25°C to +75°C

X - Extended: -40°C to +85°

H: Case Height (mm)

A - 8.5mm up to 2.0GB

B - 11.3mm up to 10.2GB

C - 14.5mm up to 16.3GB

D - 18.5mm up to 22.5GB

F - 26.6mm up to 34.8B

H - 34.2mm up to 47.1GB

For additional information regarding FFD please contact ffd@m-systems.com

http://www.m-sys.com/Content/Products/product.asp?pid=26 (4 of 4)2/16/2004 11:09:37 AM