2SK117 TOSHIBA Field Effect Transistor Silicon N Channel Junction Type 2SK117 Low Noise Audio Amplifier Applications Unit: mm * High |Yfs|: |Yfs| = 15 mS (typ.) (VDS = 10 V, VGS = 0) * High breakdown voltage: VGDS = -50 V * Low noise: NF = 1.0dB (typ.) * High input impedance: IGSS = -1 nA (max) (VGS = -30 V) (VDS = 10 V, ID = 0.5 mA, f = 1 kHz, RG = 1 k) Maximum Ratings (Ta = 25C) Characteristics Symbol Rating Unit VGDS -50 V Gate current IG 10 mA Drain power dissipation PD 300 mW Junction temperature Tj 125 C Tstg -55~125 C Gate-drain voltage Storage temperature range JEDEC TO-92 JEITA SC-43 TOSHIBA 2-5F1D Weight: 0.21 g (typ.) Electrical Characteristics (Ta = 25C) Characteristics Gate cut-off current Gate-drain breakdown voltage Drain current Symbol Test Condition Min Typ. Max Unit IGSS VGS = -30 V, VDS = 0 -1.0 nA V (BR) GDS VDS = 0, IG = -100 A -50 V VDS = 10 V, VGS = 0 1.2 14 mA VDS = 10 V, ID = 0.1 A -0.2 -1.5 V IDSS (Note) Gate-source cut-off voltage VGS (OFF) Forward transfer admittance Yfs VDS = 10 V, VGS = 0, f = 1 kHz 4.0 15 mS Input capacitance Ciss VDS = 10 V, VGS = 0, f = 1 MHz 13 pF Reverse transfer capacitance Crss VGD = -10 V, ID = 0, f = 1 MHz 3 pF 5 10 NF (1) Noise figure NF (2) Note: IDSS classification VDS = 10 V, RG = 1 k ID = 0.5 mA, f = 10 Hz VDS = 10 V, RG = 1 k ID = 0.5 mA, f = 1 kHz dB 1 2 Y: 1.2~3.0 mA, GR: 2.6~6.5 mA, BL: 6~14 mA 1 2003-03-25 2SK117 2 2003-03-25 2SK117 3 2003-03-25 2SK117 RESTRICTIONS ON PRODUCT USE 000707EAA * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 4 2003-03-25