DO NOT
SCALE FROM
THIS PRINT
HSEC8-1XX-XX-X-RA-XX-XX
-BL: BOARD LOCK OPTION
(USE HSEC8-XXX-01-RA-BL)
(AVAILABLE IN -09, -13, *-20, 25,
40, -49, 50, 60 POS ONLY,
SEE FIG 3, SHT 8)
-L2: ECDP LATCHING OPTION
(USE HSEC8-XXX-01-RA-L2)
(AVAILABLE IN -09, -13, -25, -49
POS ONLY, SEE FIG 4, SHT 9)
OPTION
-TR: TAPE & REEL
PACKAGING
PLATING SPECIFICATION
-01: 1.57mm [.062] THICK CARD
CARD THICKNESS
-RA: RIGHT ANGLE
(USE HSEC8-XXX-01-RA-XX)
ROW SPECIFICATION
-10, -20, -30 (SEE FIG 1)
-09, -13, -25, -40, -49, -50, -60
(SEE FIG 2)
No OF POSITIONS
-L: 10µ" SELECTIVE GOLD ON
CONTACT AREA, TIN TAIL
-S: 30µ" SELECTIVE GOLD ON
CONTACT AREA, TIN TAIL
(* = NOT TOOLED)
(No OF POS x 0.800) + 4.600
REF
1.126
(No OF POS x 0.80) + 1.400
REF
1.75
REF
.069 5.20 .205
REF
3.00 .118
REF
0.25 .010
REF (TYP)
(No OF POS x 0.80) + 8.60
REF
((No OF POS - 1) x 0.800)
±0.100
(SEE NOTE 12)
0.800
±0.100
(TYP)
.0315
±.0039
(TOL NON ACCUM)
(SEE NOTE 12)
((No OF POS x 0.80) + 3.51)
±0.10
(EITHER DIRECTION)
2
MAX SWAY
1.100 .043
"A"
"A"
"B"
"B"
POSITION #1
INDICATOR
01
02
WT-51-XX-T
(SEE TABLE 5)
59
60
C
C
C
9.30 .366
REF
1.32
REF
.052
12.05 .474
REF
3.100 .122
(SEE NOTE 12)
(No OF POS - 1) x 0.800
(SEE NOTE 12)
0.800
(TYP)
.0315
(TOL NON ACCUM)
(SEE NOTE 12)
1.32 .052
REF
1.10 .043
REF
(No OF POS x 0.80) + 5.40
REF
HSEC8-XXX-01-RA
HSEC8-SPACER-XXX
C
C
SOME CENTER FEATURES
NOT SHOWN FOR CLARITY
1.54 .061
REF
0.50
REF
.020
7.00
±0.08
.276
±.003
1.00
REF
.039
SECTION "B"-"B"
SCALE 4.5 : 1
C
C
FIG 1
FOR POSITIONS -10, -20 & -30
HSEC8-130-01-X-RA SHOWN
(SOME CENTER FEATURES NOT
SHOWN FOR CLARITY)
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS ANGLES
X.X:
0.3 [.01] 2
X.XX:
0.13 [.005]
X.XXX:
0.051 [.0020]
MATERIAL:
0.8MM HIGH SPEED ASSEMBLY
BY:
HSEC8-1XX-XX-X-RA-XX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
ROY LUO
11/05/2008
9
1
SHEET SCALE: 2.5:1
INSULATOR: LCP UL94V-0, COLOR: BLACK
CONTACT : BeCu
WELD TAB: BRASS
F:\DWG\MISC\MKTG\HSEC8-1XX-XX-X-RA-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM BURR ALLOWANCE: 0.038[.0015]
3. MINIMUM RETENTION FORCE: 2.22N[.5 LB] FOR PINS AND WELD TAB.
4. MEASURE AT BEND TANGENCY.
5. NOTE DELETED.
6. PARTS TO BE PACKAGED IN TRAY, UNLESS -TR OPTION IS SPECIFIED.
TRAYS ARE NOT DESIGNED FOR AUTO-PLACEMENT OF THE PRODUCT.
7. NOTE DELETED.
8. DIMENSIONS MUST BE MEASURED ON BOTH ENDS OF THE CONNECTOR.
IF PINS WERE HAND FORMED, MEASURE ONE PIN ONLY (IF APPLICABLE) ON EACH END.
IF PINS WERE AUTOMATION FORMED, MEASURE 4 CONSECUTIVE PINS ON EACH END.
9. NOTE DELETED.
10. NOTE DELETED.
11. LTC-XX TO BE IN CLOSED POSITION AS SHOWN.
12. MEASURE BOTH TOP AND BOTTOM ROWS.
13. DIMENSIONS TO BE MEASURE ON 4 CONSECUTIVE PINS IF AUTOMATION FORMED.
MEASURED ON ONE PIN FROM EACH END OF COMB IF HAND FORMED.
REVISION W
3.05 .120
REF
2.90 .114
REF
8.70
±0.10
.342
±.004
(SEE NOTE 8)
0.90
±0.08
(TYP)
.035
±.003
(SEE NOTE 8)
10.55
±0.10
.415
±.004
(SEE NOTE 8)
0.60
-
0.15
+
0.10 .024
-
.006
+
.004
3.00 .118
REF
'D'
'C'
SECTION "A"-"A"
C
C
C
C
(INCLUDES PINS & BODY)
(USE MACHINE AT-2302-000)
C
SEE TABLE 1
0.00±0.05 .000±.002
(SEE NOTES 4 & 8)
'E'
DETAIL 'D'
C
0.00
±0.05
.000
±.002
(SEE NOTES 4 & 8)
(USE FIXTURE AT-2194-818)
DETAIL 'E'
C
0.02 .001
MIN
(SEE NOTES 4 & 8)
(USE FIXTURE AT-2194-818)
0.40±0.05 .016±.002
(TO -F-)
(SEE NOTE 4)
(USE FIXTURE AT-2194-818)
DETAIL 'C'
SCALE 14 : 1
C
C
C-272-02-X
C-272-01-X
SHEET OF
0.8MM HIGH SPEED ASSEMBLY
BY:
HSEC8-1XX-XX-X-RA-XX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
ROY LUO
11/05/2008
9
2
SHEET SCALE: 7:1
REVISION W
F:\DWG\MISC\MKTG\HSEC8-1XX-XX-X-RA-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
(No OF POS x 0.80) + 4.600
REF
"G" REF
(No OF POS x 0.80) + 7.800
REF
((No OF POS x 0.80) + 6.71)
±0.10
(No OF POS x 0.80) + 11.80
REF
2.00
REF
.079
4.00 .157
(SEE NOTE 12)
"H" SPACES @ 0.800 ="J"
±0.100
(SEE NOTE 12)
((No OF POS + 3) x 0.800)
±0.100
(SEE NOTE 12)
02
01 119
120
C
C
C
C
(No OF POS x 0.80) + 8.60
REF
((No OF POS + 3) x 0.800)±0.100
(SEE NOTE 12)
FIG 2
FOR POSITIONS -09, -13, -25, -40, -49, -50, -60
SAME AS FIG 1, UNLESS OTHERWISE STATED
HSEC8-160-01-X-RA SHOWN
(SOME CENTER FEATURES NOT SHOWN FOR CLARITY)
C
SHEET OF
0.8MM HIGH SPEED ASSEMBLY
BY:
HSEC8-1XX-XX-X-RA-XX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
ROY LUO
11/05/2008
9
3
SHEET SCALE: 2.5:1
REVISION W
F:\DWG\MISC\MKTG\HSEC8-1XX-XX-X-RA-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
R0.30
.012
(2 PLCS)
1.098±0.10 .0432±.004
2°
+
-
3°
1°
90°
+
-
0°
3°
1.63±0.03 .064±.001
'G'
C
IN-PROCESS 3
(FORM 2 CONTACT C-272-01-X)
(USE FIXTURE AT-2194-815)
(RIGHT SIDE SHOWN)
(SEE NOTE 13)
C
C
C
1.098
±0.10
.0432
±.004
R
0.30 .012
90°
-
3°
+
0°
'F'
IN-PROCESS 2
(FORM 1 CONTACT C-272-01-X)
(USE FIXTURE AT-2194-815)
(RIGHT SIDE SHOWN)
(SEE NOTE 13)
(ONLY APPLICABLE FOR HAND FORMING PINS)
C
C
0.30 .012
MEASUREMENT LOCATION
FOR C20
0.75 .030
SKEW MEASUREMENT
POINT FOR C20
0.50 .020
SKEW DATUM POINT
FOR C20
DETAIL 'F'
SCALE 16 : 1
-D-
D1
D2
D3
0.75 .030
SKEW MEASUREMENT
POINT FOR C23
0.50 .020
SKEW DATUM POINT FOR C23
DETAIL 'G'
SCALE 18 : 1
-D-
D2
D3
D1
"L"
("M" No OF CONTACTS)
0.29±0.08 .011±.003
(BOTH ENDS)
IN-PROCESS 1 & 7
(COMB CUT CONTACT
C-272-01-X & C-272-02-X)
(USE FIXTURE AT-2194-815)
C
SHEET OF
0.8MM HIGH SPEED ASSEMBLY
BY:
HSEC8-1XX-XX-X-RA-XX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
ROY LUO
11/05/2008
9
4
SHEET SCALE: 5:1
REVISION W
F:\DWG\MISC\MKTG\HSEC8-1XX-XX-X-RA-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
R0.30
.012
90°
+
-
0°
5°
2.930±0.10 .1154±.004
'H'
IN-PROCESS 8
(FORM CONTACT C-272-02-X)
(USE FIXTURE AT-2194-815)
(LEFT SIDE SHOWN)
(SEE NOTE 13)
(ONLY APPLICABLE FOR HAND FORMING PINS)
C
C
0.30 .012
MEASUREMENT LOCATION
FOR C30
2.40 .095
SKEW DATUM POINT
FOR C30
0.75 .030
SKEW MEASUREMENT
POINT FOR C30
DETAIL 'H'
SCALE 14 : 1
-E-
E1
E2
E3
90°
+
-
0°
5°
4.40±0.03 .173±.001
2.930±0.10 .1154±.004
R0.30
.012
(2 PLCS)
2°
+
-
3°
1°
'J'
C
C
C
IN-PROCESS 9
(FORM CONTACT C-272-02-X)
(USE FIXTURE AT-2194-815)
(LEFT SIDE SHOWN)
(SEE NOTE 13)
C
0.30 .012
MEASUREMENT LOCATION
FOR C30
0.75 .030
SKEW MEASUREMENT
POINT FOR C30
2.40 .094
SKEW DATUM POINT
FOR C30
DETAIL 'J'
SCALE 14 : 1
-E-
E1
E2
E3
SHEET OF
0.8MM HIGH SPEED ASSEMBLY
BY:
HSEC8-1XX-XX-X-RA-XX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
ROY LUO
11/05/2008
9
5
SHEET SCALE: 5:1
REVISION W
F:\DWG\MISC\MKTG\HSEC8-1XX-XX-X-RA-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
7.80
REF
.307 0.00
REF
.000
C-272-01-X
IN-PROCESS 4
(FILL BOTTOM ROW)
(SEE INSPECTION VIEW 1 FOR ASSEMBLY ORIENTATION AND CPCs)
8.70
REF
.342
0.90
REF
.035
0.00
REF
.000
SHEAR CARRIER
IN-PROCESS 5
(CUT OFF CARRIER)
(SEE INSPECTION VIEW 1 FOR ASSEMBLY ORIENTATION AND CPCs)
(PINS ONLY)
SEE TABLE 1, SHT 2
7.80
±0.13
.307
±.005
(TO PIN)
(SEE NOTE 8)
0.90
±0.08
.035
±.003
(TO PIN)
(SEE NOTE 8)
8.70
±0.10
.342
±.004
(SEE NOTE 8)
INSPECTION VIEW 1
(USE FIXTURE AT-2298-801-03)
C
C
C
'N'
'K'
INSPECTION FOR IN-PROCESSES 4 & 5
(CARRIER NOT SHOWN FOR IN-PROCESS 4 INSPECTIONS)
0.00±0.05 .000±.002
(SEE NOTE 4)
DETAIL 'K'
SCALE 5 : 1
C
(PINS ONLY)
C
(SEE TABLE 1, SHT 2)
0.00±0.05 .000±.002
(SEE NOTE 4)
DETAIL 'N'
SCALE 5 : 1
C
0.00
±0.10
.000
±.004
'R'
C
HSEC8-SPACER-XXX
IN-PROCESS 6
(FILL HSEC8-SPACER-XXX)
0.59 .023
(SEE NOTE 8)
DETAIL 'R'
SCALE 6 : 1
C
C
L
SHEET OF
0.8MM HIGH SPEED ASSEMBLY
BY:
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
ROY LUO
11/05/2008
9
6
SHEET SCALE: 4:1
REVISION W
F:\DWG\MISC\MKTG\HSEC8-1XX-XX-X-RA-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
HSEC8-1XX-XX-X-RA-XX-XX
9.65
REF
.380
0.60
-
0.15
+
0.10 .024
-
.006
+
.004
0.40 .016
REF
(TO -F-)
C
IN-PROCESS 10
(FILL TOP ROW)
(SEE INSPECTION VIEW 2 FOR ASSEMBLY ORIENTATION AND CPCs)
C-272-02-X
9.65
REF
.380
0.40 .016
REF
(TO -F-)
HEAT STAKE
TOP ROW TAILS
IN-PROCESS 11
(HEAT STAKE TOP ROW CONTACTS)
(SEE INSPECTION VIEW 2 FOR ASSEMBLY ORIENTATION AND CPCs)
C
10.55
REF
.415
0.90
REF
.035 0.40 .016
REF
(TO -F-)
SHEAR
CARRIER
IN-PROCESS 12
(CUT OFF CARRIER)
(SEE INSPECTION VIEW 2 FOR ASSEMBLY ORIENTATION AND CPCs)
(PINS ONLY)
SEE TABLE 1, SHT 2
7.00
±0.08
.276
±.003
WT-51-XX-T
(SEE TABLE 5, SHT 1)
C
IN-PROCESS 13
(FILL WT-51-XX-T)
'L'
'M'
-F-
9.65
±0.18
.380
±.007
(TO PIN)
(SEE NOTE 8)
0.90
±0.08
.035
±.003
(TO PIN)
(SEE NOTE 8)
10.55
±0.10
.415
±.004
(SEE NOTE 8)
INSPECTION FOR IN-PROCESSES 10, 11 & 12
(CARRIER NOT SHOWN FOR IN-PROCESS 10 & 11 INSPECTIONS)
INSPECTION VIEW 2
(USE FIXTURE AT-2194-818)
C
C
C
0.40
±0.05
.016
±.002
(TO -F-)
(SEE NOTE 4)
DETAIL 'L'
SCALE 5 : 1
C
F1
0.40
±0.05
.016
±.002
(TO -F-)
(SEE NOTE 4)
DETAIL 'M'
SCALE 5 : 1
C
(PINS ONLY)
C
(SEE TABLE 1, SHT 2)
F2
SHEET OF
0.8MM HIGH SPEED ASSEMBLY
BY:
HSEC8-1XX-XX-X-RA-XX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
ROY LUO
11/05/2008
9
7
SHEET SCALE: 4:1
REVISION W
F:\DWG\MISC\MKTG\HSEC8-1XX-XX-X-RA-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
"F"
REF
5.95 .234
(TYP)
"H"
REF
"P"
"P"
'Q'
C
15.65 .616
REF
12.05 .474
REF
5.575 .2195
SECTION
"P"-"P"
LTC-18
(SEE NOTE 11)
LTC-19
(SEE NOTE 11)
HSEC8-XXX-01-RA-BL
DETAIL 'Q'
SCALE 4 : 1
THIS FEATURE IS OPTIONAL
AND CAN BE ADDED OR
REMOVED AT SAMTEC'S
DISCRETION
FIG 3
-BL: BOARD LOCK OPTION ONLY AVAILABLE
FOR -09, -13, *-20, -25, -40, -49, -50, -60 POSITIONS
(FOR -09, -13, -25, -40, -49, -50, -60 POSITIONS, SAME AS FIG 2, UNLESS OTHERWISE STATED)
(FOR *-20 POSITION, SAME AS FIG 2, UNLESS OTHERWISE STATED)
HSEC8-160-01-X-RA-BL SHOWN
(SOME CENTER FEATURES NOT SHOWN FOR CLARITY)
(* = NOT TOOLED)
LTC-XX REMOVED FOR CLARITY
SHEET OF
0.8MM HIGH SPEED ASSEMBLY
BY:
HSEC8-1XX-XX-X-RA-XX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
11/05/2008
9
8
SHEET SCALE: 2:1
REVISION W
F:\DWG\MISC\MKTG\HSEC8-1XX-XX-X-RA-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
ROY LUO
((No OF POS x 0.80) + 8.56)
±0.10
(No OF POS) x 0.80) + 13.66
REF
C
HSEC8-XXX-01-RA-L2
(No OF POS x 0.80) + 9.66
REF
FIG 4
-L2: ECDP LATCHING OPTION
AVAILABLE ONLY IN -09, -13, -25 & -49 POSITIONS
SAME AS FIG 2, UNLESS OTHERWISE STATED
HSEC8-125-01-X-RA-L2 SHOWN
SHEET OF
0.8MM HIGH SPEED ASSEMBLY
BY:
HSEC8-1XX-XX-X-RA-XX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
ROY LUO
11/05/2008
9
9
SHEET SCALE: 2:1
REVISION W
F:\DWG\MISC\MKTG\HSEC8-1XX-XX-X-RA-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322