TEMD1000, TEMD1020, TEMD1030, TEMD1040 www.vishay.com Vishay Semiconductors Silicon PIN Photodiode, RoHS Compliant TEMD1000 FEATURES TEMD1020 * Package type: surface mount * Package form: GW, RGW, yoke, axial TEMD1030 * Dimensions (L x W x H in mm): 2.5 x 2 x 2.7 * Radiant sensitive area (in mm2): 0.23 * High radiant sensitivity * Daylight blocking filter matched with 870 nm to 950 nm emitters TEMD1040 * Fast response times * Angle of half sensitivity: = 15 * Package matches with IR emitter series TSMF1000 18029 * Floor life: 168 h, MSL 3, acc. J-STD-020 * Compliant to RoHS Directive 2002/95/EC and in accordance with WEEE 2002/96/EC DESCRIPTION TEMD1000 series are PIN photodiodes with high speed and high radiant sensitivity in black, surface mount plastic packages with lens and daylight blocking filter. Filter bandwidth is matched with 870 nm to 950 nm IR emitters. APPLICATIONS * High speed detector for infrared radiation * Infrared remote control and free air data transmissionsystems, e.g. in combination with TSFFxxxx series IR emitters PRODUCT SUMMARY Ira (A) (deg) 0.5 (nm) TEMD1000 6.0 to 13.0 15 790 to 1050 TEMD1020 6.0 to 13.0 15 790 to 1050 TEMD1030 6.0 to 13.0 15 790 to 1050 TEMD1040 6.0 to 13.0 15 790 to 1050 COMPONENT Note * Test conditions see table "Basic Characteristics" ORDERING INFORMATION ORDERING CODE PACKAGING REMARKS PACKAGE FORM TEMD1000 Tape and reel MOQ: 1000 pcs, 1000 pcs/reel Reverse gullwing TEMD1020 Tape and reel MOQ: 1000 pcs, 1000 pcs/reel Gullwing TEMD1030 Tape and reel MOQ: 1000 pcs, 1000 pcs/reel Yoke TEMD1040 Bulk MOQ: 1000 pcs, 1000 pcs/bulk Axial leads Note * MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION Reverse voltage Power dissipation Tamb 25 C Junction temperature Operating temperature range Storage temperature range Soldering temperature Rev. 2.4, 09-Aug-11 t5s SYMBOL VALUE VR 60 UNIT V PV 75 mW Tj 100 C Tamb - 40 to + 85 C Tstg - 40 to + 100 C Tsd < 260 C 1 Document Number: 81564 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TEMD1000, TEMD1020, TEMD1030, TEMD1040 www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL IF = 50 mA VF IR = 100 A, E = 0 V(BR) VR = 10 V, E = 0 Forward voltage Breakdown voltage Reverse dark current Diode capacitance Reverse light current TYP. MAX. UNIT 1 1.3 V Iro 1 10 nA 1.8 VR = 5 V, f = 1 MHz, E = 0 CD Ee = 1 mW/cm2, = 870 nm, VR = 5 V Ira Ee = 1 mW/cm2, = 950 nm, VR = 5 V Ira MIN. 60 V 6.0 pF 10 13.0 A 12 A VR = 5 V, = 870 nm, TKIra 0.2 %/K VR = 5 V, = 870 nm s() 0.60 A/W VR = 5 V, = 950 nm s() 0.55 A/W Angle of half sensitivity 15 deg Wavelength of peak sensitivity p 940 nm 0.5 790 to 1050 nm Temperature coefficient of Ira Absolute spectral sensitivity Range of spectral bandwidth Rise time VR = 10 V, RL = 50 , = 820 nm tr 4 ns Fall time VR = 10 V, RL = 50 , = 820 nm tf 4 ns BASIC CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 100 Ira - Reverse Light Current (A) Iro - Reverse Dark Current (nA) 1000 100 10 VR = 10 V 10 1 20 40 60 0.1 0.01 100 80 16055 Tamb - Ambient Temperature (C) 94 8427 0.1 1 10 Ee - Irradiance (mW/cm) Fig. 3 - Reverse Light Current vs. Irradiance 8 1.4 CD - Diode Capacitance (pF) Ira, rel - Relative Reverse Light Current Fig. 1 - Reverse Dark Current vs. Ambient Temperature VCE = 5 V = 950 nm 1.0 VR = 5 V = 950 nm 1.2 1.0 0.8 6 E=0 f = 1 MHz 4 2 0 0.6 0 94 8416 20 40 60 80 100 0.1 Tamb - Ambient Temperature (C) 94 8430 Fig. 2 - Relative Reverse Light Current vs. Ambient Temperature Rev. 2.4, 09-Aug-11 1 10 100 VR- Reverse Voltage (V) Fig. 4 - Diode Capacitance vs. Reverse Voltage 2 Document Number: 81564 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TEMD1000, TEMD1020, TEMD1030, TEMD1040 www.vishay.com Vishay Semiconductors 0 10 20 1.0 0.8 0.6 0.4 0.2 40 1.0 0.9 50 0.8 60 70 0.7 - Angular Displacement 30 Srel - Relative Sensitivity S()rel - Relative Spectral Sensivity 1.2 80 0.0 750 94 8426 850 950 1050 0.4 0.6 1150 0.2 0 94 8248 - Wavelength (nm) Fig. 5 - Relative Spectral Sensitivity vs. Wavelength Fig. 6 - Relative Radiant Sensitivity vs. Angular Displacement PRECAUTIONS FOR USE REFLOW SOLDER PROFILE 1. Over-current-proof 260 Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (burn out will happen). 240 Temperature (C) 220 2. Storage * Storage temperature and rel. humidity conditions are: C to 35 C, R.H. 60 %. 5 * Floor life must not exceed 168 h, acc. to JEDEC level 3, J-STD-020. Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with desiccant. Considering tape life, we suggest to use products within one year from production date. 200 - 5 C/s + 5 C/s 180 160 140 120 60 s to 120 s 5s 100 80 60 0 20 40 60 80 100 120 140 160 180 200 220 Time (s) 17172 Fig. 7 - Lead Tin (SnPb) Reflow Solder Profile * If opened more than one week in an atmosphere 5 C to 35 C, R.H. 60 %, devices should be treated at 60 C 5 C for 15 h. 1 C/s to 5 C/s * If humidity indicator in the package shows pink color (normal blue), then devices should be treated with the same conditions as 2.3. Pre-heating 180 C to 200 C 260 C max. 10 s max. 60 s max. above 220 C 120 s max. 1 C/s to 5 C/s 22566 Fig. 8 - Lead (Pb)-Free Reflow Solder Profile acc. J-STD-020 Rev. 2.4, 09-Aug-11 3 Document Number: 81564 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TEMD1000, TEMD1020, TEMD1030, TEMD1040 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters: TEMD1000 16159 PACKAGE DIMENSIONS in millimeters: TEMD1020 3.8 0.2 2.7 0.2 0.75 0.15 0.05 1.4 0.85 O 1.9 0.2 0.3 0.4 C Rev. 2.4, 09-Aug-11 4.5 0.1 0.5 2 0.2 1.1 2.3 0.1 1 0.1 2.5 0.2 16160 A 4 Document Number: 81564 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TEMD1000, TEMD1020, TEMD1030, TEMD1040 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters: TEMD1030 16228 PACKAGE DIMENSIONS in millimeters: TEMD1040 16760 Rev. 2.4, 09-Aug-11 5 Document Number: 81564 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TEMD1000, TEMD1020, TEMD1030, TEMD1040 www.vishay.com Vishay Semiconductors REEL DIMENSIONS in millimeters Unreel direction X 2. 60.2 0.5 16 0.2 5 0 178 1 .5 0. 5 Tape position coming out from reel 13 X 13.2 1.5 Label posted here Leader and trailer tape: Empty leader (400 mm, min.) Parts mounted Drawing-No.: 9.800-5080.01-4 Direction of pulling out Issue: 3; 11.06.08 Empty trailer (200 mm, min.) 18033 TAPING DIMENSIONS in millimeters: TEMD1000 3.05 0.1 Top tape Anode 12 0.3 1.75 0.1 2 0.05 O 1.55 0.05 5.5 0.05 0.3 4 0.1 4 0.1 Feed direction Push pin through hole Quantity per reel: 1000 pcs or 5000 pcs Rev. 2.4, 09-Aug-11 6 18030 Document Number: 81564 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TEMD1000, TEMD1020, TEMD1030, TEMD1040 www.vishay.com Vishay Semiconductors TAPING DIMENSIONS in millimeters: TEMD1020 3.05 0.1 4 0.1 Feed direction Top tape 12 0.3 2 0.05 1.75 0.1 O 1.55 0.05 5.5 0.05 0.3 4 0.1 Anode Push pin through hole Quantity per reel: 1000 pcs or 5000 pcs 18031 TAPING DIMENSIONS in millimeters: TEMD1030 3.05 0.1 4 0.1 Feed direction Top tape Anode Push pin through hole Rev. 2.4, 09-Aug-11 12 0.3 1.75 0.1 2 0.05 O 1.55 0.05 5.5 0.05 0.3 4 0.1 18032 Quantity per reel: 1000 pcs or 5000 pcs 7 Document Number: 81564 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000