HMC344LC3 v02.1210 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 8 GHz Typical Applications Features The HMC344LC3 is ideal for: Broadband Performance: DC - 8 GHz * Broadband, Military, Radar & ECM Integrated 2:4 TTL Decoder * Fiber Optics High Isolation: 40 dB@ 6 GHz * Switched Filter Banks Low Insertion Loss: 2 dB@ 6 GHz * Wireless below 8 GHz Non-Reflective Topology * Test Instrumentation Functional Diagram General Description The HMC344LC3 is a broadband non-reflective GaAs MESFET SP4T switch in a ceramic 3x3 mm leadless surface mount package. Covering DC to 8 GHz, this switch offers high isolation and low insertion loss. The HMC344LC3 includes an integrated binary decoder circuit which reduces the required logic control lines to two. The switch operates using a negative control voltage of 0/-5V, and requires a fixed bias of -5V. Simple external level shifting circuitry allows this switch to be controlled with most TTL/CMOS positive logic families. Switches - multi-throw - SMT 15 15 - 1 Electrical Specifications, TA = +25 C, With 0/-5V Control, 50 Ohm System Parameter Frequency Min. Typ. Max. Units 1.6 2.0 2.5 2.0 2.8 3.0 dB dB dB Insertion Loss DC - 2.0 GHz DC - 6.0 GHz DC - 8.0 GHz Isolation DC - 2.0 GHz DC - 4.0 GHz DC - 6.0 GHz DC - 8.0 GHz 43 35 32 30 50 45 45 40 dB dB dB dB 15 12 12 12 17 16 16 17 dB dB dB dB Return Loss "On State" DC - 2.0 GHz DC - 4.0 GHz DC - 6.0 GHz DC - 8.0 GHz Return Loss "Off State" DC - 8.0 GHz 12 15 dB Input Power for 0.1 dB Compression 0.5 - 8.0 GHz 22 26 dBm Input Third Order Intercept (Two-Tone Input Power = +7 dBm Each Tone) 0.5 - 8.0 GHz 43 dBm Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) DC - 8.0 GHz 20 70 ns ns For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC344LC3 v02.1210 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 8 GHz Insertion Loss vs. Temperature Isolation 0 -10 -1 ISOLATION (dB) -2 -3 +25 C +85 C -40 C -4 RF1 RF2 RF3 RF4 -20 -30 -40 -50 -60 -5 -70 0 1 2 3 4 5 6 7 8 9 0 1 2 3 FREQUENCY (GHz) Return Loss 6 7 8 9 10 32 INPUT COMPRESSION POINT (dBm) RFC RF1,2,3,4 On RF1,2,3,4 Off -5 RETURN LOSS (dB) 5 0.1 and 1 dB Input Compression Point 0 -10 -15 -20 15 30 28 26 24 1.0 dB 0.1 dB 22 20 18 -25 0 1 2 3 4 5 6 7 8 2 9 3 4 5 6 7 8 9 FREQUENCY (GHz) FREQUENCY (GHz) Bias Voltage & Current Input Third Order Intercept Point iNPUT THIRD ORDER INTERCEPT (dBm) 4 FREQUENCY (GHz) 49 Vee Range = -5.0 Vdc 10% 47 Vee (Vdc) Iee (Typ.) (mA) Iee (Max.) (mA) 45 -5.0 3.0 6.0 43 Control Voltages 41 39 RF1 RF2 RF3 RF4 37 35 0 1 2 3 4 5 6 7 8 State Bias Condition Low -3V to 0 Vdc @ 60 A Typical High -5 to -4.2 Vdc @ 5 A Typical 9 FREQUENCY (GHz) Switches - multi-throw - SMT INSERTION LOSS (dB) 0 * Isolation is recorded above insertion loss & measured at output of switch. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 15 - 2 HMC344LC3 v02.1210 Absolute Maximum Ratings Bias Voltage Range (Vee) -7.0 Vdc Control Voltage Range (A & B) Vee -0.5V to +1.0 Vdc Channel Temperature 150 C Thermal Resistance (Insertion Loss Path) 100 C/W Thermal Resistance (Terminated Path) 180 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C Maximum Input Power (Low Loss State) +28 dBm ESD Sensitivity (HBM) Class 1A GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 8 GHz Truth Table Control Input Signal Path State A B RFC to: High High RF1 Low High RF2 High Low RF3 Low Low RF4 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing Switches - multi-throw - SMT 15 15 - 3 NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC344LC3 v02.1210 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 8 GHz Pin Descriptions Function Description 1, 4, 9, 12, 15 RF4, RF3, RF2, RF1, RFC This pin is DC coupled and matched to 50 Ohm. Blocking capacitors are required if RF line potential is not equal to 0V. 2, 3, 5, 10, 11, 14, 16 GND Package bottom has exposed metal paddle that must also be connected to PCB RF ground. 6 Vee Supply Voltage -5V 10% 7 CTLB See truth table and control voltage table. 8 CTLA See truth table and control voltage table. 13 N/C This pin should be connected to PCB RF ground to maximize isolation. Interface Schematic 15 Switches - multi-throw - SMT Pin Number For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 15 - 4 HMC344LC3 v02.1210 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 8 GHz TTL Interface Circuit Switches - multi-throw - SMT 15 15 - 5 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC344LC3 v02.1210 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 8 GHz Evaluation PCB List of Materials for Evaluation PCB 105311 Item Description J1 - J7 PCB Mount SMA RF Connector J8 - J11 DC Pin C1 - C5 0 Resistor, 0402 Pkg.[3] C6 1000 pF Capacitor, 0402 Pkg. U1 HMC344LC3 PCB [2] 104708 Evaluation PCB 1.29"x1.55" [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 [1] The circuit board used in the application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and backside ground slug should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. [3] Select and replace with a suitable capacitor value for applicable operating frequency range. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Switches - multi-throw - SMT 15 15 - 6