FR6J
6 Amp Fast
Recovery Rectifier
600 Volts
Features
Maximum Ratings
•Operating Temperature: -55°C to +150°C
•Storage Temperature: -55°C to +150°C
MCC
Part Number
Maximum
Recurrent
Peak Reverse
Voltage
Maximum
RMS Voltage
Maximum DC
Blocking
Voltage
Electrical Characteristics @ 25°C Unless Otherwise Specified
Average Forward
Current
IF(AV) 6 A TA = 55°C
Peak Forward Surge
Current
IFSM 300A 8.3ms, half sine
Maximum
Instantaneous
Forward Voltage
VF1.30V IFM = 6.0A;
TA= 25°C*
Maximum DC
Reverse Current At
Rated DC Blocking
Voltage
IR10µA
50µA
TA = 25°C
TA = 55°C
FR6J 250ns
IF=0.5A, IR=1.0A,
Irr=0.25A
*Pulse Test: Pulse Width 300µsec, Duty Cycle 1%
H
J
E
F
G
A
B
D
C
Cathode Band
FR6J 600V 420V 600V
DO-214AB
(HSMC) (Round Lead)
0.070”
0.190
0.200”
SUGGESTED SOLDER
PAD LAYOUT
omponents
20736 Marilla Street Chatsworth
!"#
$% !"#
MCC
Revision: B 2013/01/01
DIMENSIONS
INCHES MM
DIM MIN MAX MIN MAX NOTE
A .200 .214 5.08 5.43
B .177 .203 4.70 5.30
C .002 .005 .05 .13
D --- .02 --- .51
E .047 .056 1.20 1.42
F .168 .179 4.27 4.55
G .309 .322 7.85 8.18
H .239 .243 6.08 6.18
J .234 .240 5.95 6.10
TM
Micro Commercial Components
•Fast Switching Speed For High Efficiency
xMarking : Cathode band and type number
www.mccsemi.com
1 of 4
• Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates
Compliant. See ordering information)
Note: 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7.
Maximum Reverse
Recovery Time
Trr
• Epoxy meets UL 94 V-0 flammability rating
• Moisture Sensitivity Level 1
• Halogen free available upon request by adding suffix "-HF"
FR6J
MCC
Figure 2
Forward Derating Curve
017550 75 100 125
0
2
4
6
Single Phase, Half Wave
60Hz Resistive or Inductive Load
Amps
Ambient Temperature °C
150
8
10
12
Junction Capacitance - pF versus
Reverse Voltage - Volts
Instantaneous Forward Current - Amperes versus
Instantaneous Forward Voltage - Volts
Figure 1
Typical Forward Characteristics
4
6
20
10
Amps
.6 .8 1.0 1.2 1.4 1.6
.01
.02
.04
.06
.1
.2
.4
.6
1
2
25°C
Volts
Figure 3
Junction Capacitance
.1 .2 1.4 2 10 20 404 100 200
1
2
6
10
20
100
pF
Volts
60
40
4
400 1000
TJ=25°C
Revision: B 2013/01/01
TM
Micro Commercial Components
www.mccsemi.com
2 of 4
FR6J
trr
+0.5A
0
-0.25
-1.0
1cm
Set Time Base for 20/100ns/cm
25Vdc
1Ω
50Ω10Ω
Oscilloscope
Note 1
Pulse
Generator
Note 2
Notes:
1. Rise Time = 7ns max.
Input impedance = 1 megohm, 22pF
2. Rise Time = 10ns max.
Source impedance = 50 ohms
3. Resistors are non-inductive
Figure 5
Reverse Recovery Time Characteristic And Test Circuit Diagram
1 100
4
0
50
100
150
8
Figure 4
Peak Forward Surge Current
Peak Forward Surge Current - Amperes versus
Number Of Cycles At 60Hz - Cycles
Amps
Cycles
26 10 20 60 80
40
200
250
300
MCC
Revision: B 2013/01/01
TM
Micro Commercial Components
www.mccsemi.com
3 of 4
MCC
Revision: B 2013/01/01
TM
Micro Commercial Components
www.mccsemi.com
4 of 4
3
Device Packing
Part Number-TP Tape&Reel: 1.5Kpcs/Reel
Ordering Information :
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF
