Customer Information sheet DRAWING No.: M80-570XXXX SHEET 2 OF 29 IF IN DOUBT - ASK | NOT TO SCA LE THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm -= TOTAL No TOTAL No. CONTACTS - m7 . OF CONTACTS + 10.00 CONTACT No. S .00 TYP UJ MOODS VSS = TOTAL No. NOTES: MQ OF CONTACTS + 5.00 1. CONNECTORS ARE SUPPLIED WITH CONTACTS LOOSE. 2. FOR EXTRA CONTACTS, USE PART NUMBER M80-1940005. 3. RECOMMENDED WIRE TYPE = BS 3G 210 TYPE A, PTFE INSULATED 22 AWG. MAX NSULATION DIAMETER = @I.10mm, STRIP WIRE BY 2.00mm. 4. RECOMMENDED HAND CRIMP TOOL = M22520/2-01 WITH POSITIONER 15747. PART SECTION Y-Y REFER TO SPECIFICATIONS: MATERIAL: MOULDING = GLASS-FILLED PPS, UL94V-0, BLACK CONTACT = COPPER ALLOY FINISH: 0.25-0.3y GOLD ELECTRICAL: CURRENT RATING AT 25. = 3.0A MAX CURRENT RATING AT 85C = 2.2A MAX WORKING VOLTAGE = 120V VOLTAGE PROOF = 360V AC/DC CONTACT RESISTANCE = 25 mQ) MAX INSULATION RESISTANCE = 100 MC) MIN MECHANICAL: DURABILITY = 500 OPERATIONS ENVIRONMENTAL : PART pEMPERATURE RANGE = -55C TO +125C SECTION X-X bose: FOR COMPLETE SPECIFICATION, SEE COMPONENT SPECIFICATION COO5XX (LATEST ISSUE) ORDER CODE: SM 2 924.10. 11f 11516 M80- 570K) XXX NAMEFISS. DATE C/NOTE APPROVED: . MCCULLAGH TOTAL No. OF contacts CHECKED: M. G. PLESTED 04 - 50 DRAWN: W. J. BOURNE (EVEN NUMBERS ONLY) CUSTOMER REF .: TOOLING INSTRUCTION SHEET IS-01 FOR COMPLETE CRIMPING INSTRUCTIONS. FINISH 5. CONTACT INSERTION AND EXTRACTION TOOL = 780-280. REFER TO TOOLING INSTRUCTION 05 - GOLD ASSEMBLY DRG SHEET 1$-25 FOR ASSEMBLY INSTRUCTIONS a InrORWATION On DescatPTive | CLERANCES J MATERIAL: TITLE: JACKSCREW DATAMATE (IZA 23 (AV/FIIN] AMOR OREO AE |X, = ln SEE above DIL CRIMP. (LARGE. BORE } ee eee MALE ASSEMBLY (NO J/S) ISCL , LOANED, I . = . . www. harwin.com OR USED FOR MAMUEACTURING, JOT FINISH: SEE ABOVE DRAWING NUMBER: M80 -5STOXXXX a technical@harwin.com THO HERR TOTP RTS SCON. UNLESS STATED S/AREA: mm2 OF