SPEC NO: DSAC2351 REV NO: V.8B DATE: MAR/27/2013 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102000020
SUBMINIATURE SOLID STATE LAMP
Part Number: AM2520EH/YD5V Yellow
Features
zBlack case enhances contrast.
zVibration and shock resistant.
zHousing UL rating:94V-0.
zHousing material: type 66 nylon.
z5V internal resistor.
zRoHS compliant.
Description
The Yellow source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Yellow Light
Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAC2351 REV NO: V.8B DATE: MAR/27/2013 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102000020
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2.Wavelength value is traceable to the CIE127-2007 compliant national standards.
Notes:
1. 2mm below package base.
2. 5mm below package base.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
AM2520EH/YD5V Yellow (GaAsP/GaP) Yellow Diffused 1.2 3 40°
Iv (mcd) [2]
V= 5V
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Yellow 590 nm VF=5V
λD [1] Dominant Wavelength Yellow 588 nm VF=5V
Δλ1/2 Spectral Line Half-width Yellow 35 nm VF=5V
IF Forward Current Yellow 13 17.5 mA VF=5V
IR Reverse Current Yellow 10 uA VR = 5V
Parameter Yellow Units
Power dissipation 85 mW
Forward Voltage 6 V
Reverse Voltage 5 V
Operating Temperature -40°C To +70°C
Storage Temperature -40°C To +85°C
Lead Solder Temperature [1] 260°C For 3 Seconds
Lead Solder Temperature [2] 260°C For 5 Seconds
SPEC NO: DSAC2351 REV NO: V.8B DATE: MAR/27/2013 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102000020
Yellow AM2520EH/YD5V
SPEC NO: DSAC2351 REV NO: V.8B DATE: MAR/27/2013 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102000020
PACKING & LABEL SPECIFICATIONS AM2520EH/YD5V
SPEC NO: DSAC2351 REV NO: V.8B DATE: MAR/27/2013 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102000020
All design applications should refer to Kingbright application notes available at
http://www.KingbrightUSA.com/ApplicationNotes
