Data SheetData Sheet
Multilayer ceramic capacitors
Date: October 2006
ã EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the
information contained therein without EPCOS’ prior express consent is prohibited.
Chip capacitors, C0G
210/06
Please read Cautions and warnings and
Important notes at the end of this document.
Ordering code system
B37940 K 5 010 C 5 60
Packaging
60 cardboard tape, 180-mm reel
62 blister tape, 180-mm reel
70 cardboard tape, 330-mm reel
72 blister tape, 330-mm reel
01 bulk case
^
^
^
^
^
Decimal place for cap. values <10 pF, otherwise 0
Capacitance tolerance
B±0.1 pF
C±0.25 pF (standard for capacitance values 4.7 pF)
D±0.5 pF (standard for capacitance values 8.2 pF)
^
^
^
F±1%
G±2%
J±5% (standard)
K±10%
^
^
^
^
CR <10 pF:
CR ³10 pF:
Capacitance, coded
(example)
010 1 · 100 pF = 1 pF
100 10 · 100 pF = 10 pF
221 22 · 101 pF = 220 pF
^
^
^
Rated voltage Rated voltage [VDC]
Code
50 100 200
51 2
Termination
Type and size
Chip size
(inch / mm)
0402 / 1005
0603 / 1608
0805 / 2012
1206 / 3216
1210 / 3225
Temperature characteristic
C0G
B37920
B37930
B37940
B37871
B37949
Standard:
On request:
K nickel barrier for all case sizes
J silver-palladium for conductive adhesion: all case sizes
^
^
Chip
C0G
Multilayer ceramic capacitors
310/06
Please read Cautions and warnings and
Important notes at the end of this document.
Features
Good thermal stability
High insulation resistance
Low dissipation factor
Low inductance
To AEC-Q200
Applications
Resonant circuits
Filter circuits
Timing elements
Coupling and filtering, particularly in RF circuits
Termination
For soldering: Nickel barrier terminations (Ni)
For conductive adhesion: Silver-palladium terminations (AgPd) on request
Options
Alternative capacitance tolerances available on request
Delivery mode
Cardboard and blister tape (blister tape for chip thickness ³1.2 ±0.1 mm and case size 1210),
180-mm and 330-mm reel available
Bulk case for case sizes 0402, 0603 (50 V) and 0805 (50 V) on request
Electrical data
Temperature characteristic C0G
Climatic category (IEC 60068-1) 55/125/56
Standard EIA
Dielectric Class 1
Rated voltage VR 50, 100, 200 VDC
Test voltage Vtest 2.5 · VR/5 s VDC
Capacitance range / E series CR 1 pF … 10 nF (E6/E12)
Temperature coefficient 0 ± 30 · 10–6/K
Dissipation factor (limit value) tan d <1.0 · 10–3
Insulation resistance1) at + 25 °CR
ins >105MW
Insulation resistance1) at +125 °CR
ins >104MW
Time constant1) at + 25 °Ct >1000 s
Time constant1) at +125 °Ct >100 s
Operating temperature range Top 55 … +125 °C
Ageing none
1) For CR >10 nF the time constant t = C · Rins is given.
Chip
C0G
Multilayer ceramic capacitors
Multilayer ceramic capacitors
410/06
C0G
Please read Cautions and warnings and
Important notes at the end of this document.
Capacitance tolerances
Dimensional drawing
Dimensions (mm)
Tolerances to CECC 32101-801
CR £ 4.7 pF 5.6 pF £ CR £ 8.2 pF
Code letter B C
(standard)
DBCD
(standard)
Toleran c e ±0.1 pF
(on request)
±0.25 pF ±0.5 pF ±0.1 pF
(on request)
±0.25 pF
(on request)
±0.5 pF
CR ³ 10 pF
Code letter F G J
(standard)
K
Toleran c e ±1% (on request for 50 V
and 100 V; not available for
200 V)
±2% (on request for 50 V
and 100 V; not available for
200 V)
±5% ±10%
Case size (inch)
(mm)
0402
1005
0603
1608
0805
2012
1206
3216
1210
3225
l1.0
±0.10 1.6 ±0.15 2.00 ±0.20 3.20 ±0.20 3.20 ±0.30
b0.5
±0.05 0.8 ±0.10 1.25 ±0.15 1.60 ±0.15 2.50 ±0.30
s0.5
±0.05 0.8 ±0.10 1.30 max. 1.30 max. 1.70 max.
k 0.1 –0.40 0.1 –0.40 0.13 –0.75 0.25 –0.75 0.25 –0.75
KKE0329-N
k
s
b
k
C0G
Multilayer ceramic capacitors
510/06
C0G
Please read Cautions and warnings and
Important notes at the end of this document.
Recommended solder pad
Recommended dimensions (mm) for reflow soldering
Recommended dimensions (mm) for wave soldering
Termination
Case size (inch/mm) Type A C D
0402/1005 single chip 0.35 … 0.45 1.0 … 1.40 0.4 … 0.6
0603/1608 single chip 0.60 … 0.70 1.8 … 2.20 0.6 … 0.8
0805/2012 single chip 0.60 … 0.70 2.2 … 2.60 0.8 … 1.1
1206/3216 single chip 0.80 … 0.90 3.8 … 4.32 1.0 … 1.4
1210/3225 single chip 1.00 … 1.20 4.0 … 4.80 1.8 … 2.3
Case size (inch/mm) Type A C D
0603/1608 single chip 0.8 … 0.9 2.2 … 2.8 0.6 … 0.8
0805/2012 single chip 0.9 … 1.0 2.8 … 3.2 0.8 … 1.1
1206/3216 single chip 1.0 … 1.1 4.2 … 4.8 1.0 … 1.4
KKE0308-1
D
A
C
External electrode
Intermediate electrode
Substrate electrode
KKE0484-W
Ni
Sn
Ag
Inner electrode AgPd
Termination
(nickel barrier)
Ceramic body
C0G
Multilayer ceramic capacitors
610/06
C0G
Please read Cautions and warnings and
Important notes at the end of this document.
Product range chip capacitors, C0G
Size1)
inch
mm
0402
1005
0603
1608
0805
2012
1206
3216
1210
3225
Type B37920 B37930 B37940 B37871 B37949
50 50 100 50 100 200 50 100 50 100
1.0 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
1) l ´ b (inch) / l ´ b (mm)
VR (VDC)
CR
C0G
Multilayer ceramic capacitors
710/06
C0G
Please read Cautions and warnings and
Important notes at the end of this document.
Product range chip capacitors, C0G
Size1)
inch
mm
0402
1005
0603
1608
0805
2012
1206
3216
1210
3225
Type B37920 B37930 B37940 B37871 B37949
50 50 100 50 100 200 50 100 50 100
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1.0 nF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
1) l ´ b (inch) / l ´ b (mm)
VR (VDC)
CR
C0G
Multilayer ceramic capacitors
810/06
C0G
Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations
Case size 0402, 50 VDC
Chip thickness Cardboard tape,
Æ 180-mm reel
Cardboard tape,
Æ 330-mm reel
** 60 ** 70
CR1) Ordering code2) mm pcs/reel pcs/reel
3.3 pF B37920K5030C3** 0.5 ±0.05 10000 50000
3.9 pF B37920K5030C9** 0.5 ±0.05 10000 50000
4.7 pF B37920K5040C7** 0.5 ±0.05 10000 50000
5.6 pF B37920K5050D6** 0.5 ±0.05 10000 50000
6.8 pF B37920K5060D8** 0.5 ±0.05 10000 50000
8.2 pF B37920K5080D2** 0.5 ±0.05 10000 50000
10. pF B37920K5100J0** 0.5 ±0.05 10000 50000
12. pF B37920K5120J0** 0.5 ±0.05 10000 50000
15. pF B37920K5150J0** 0.5 ±0.05 10000 50000
18. pF B37920K5180J0** 0.5 ±0.05 10000 50000
22. pF B37920K5220J0** 0.5 ±0.05 10000 50000
27. pF B37920K5270J0** 0.5 ±0.05 10000 50000
33. pF B37920K5330J0** 0.5 ±0.05 10000 50000
39. pF B37920K5390J0** 0.5 ±0.05 10000 50000
47. pF B37920K5470J0** 0.5 ±0.05 10000 50000
56. pF B37920K5560J0** 0.5 ±0.05 10000 50000
68. pF B37920K5680J0** 0.5 ±0.05 10000 50000
82. pF B37920K5820J0** 0.5 ±0.05 10000 50000
100. pF B37920K5101J0** 0.5 ±0.05 10000 50000
^ ^
1) Capacitance values < 3.3 pF and > 100 pF on request.
2) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
C0G; 0402
Multilayer ceramic capacitors
910/06
C0G
Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations
Case size 0603, 50 VDC
Chip
thickness
Cardboard tape,
Æ 180-mm reel
Cardboard tape,
Æ 330-mm reel
Bulk case
** 60 ** 70 ** 01
CROrdering code1) mm pcs/reel pcs/reel pcs
1.0 pF B37930K5010C0** 0.8 ±0.1 4000 16000 15000
1.2 pF B37930K5010C2** 0.8 ±0.1 4000 16000 15000
1.5 pF B37930K5010C5** 0.8 ±0.1 4000 16000 15000
1.8 pF B37930K5010C8** 0.8 ±0.1 4000 16000 15000
2.2 pF B37930K5020C2** 0.8 ±0.1 4000 16000 15000
2.7 pF B37930K5020C7** 0.8 ±0.1 4000 16000 15000
3.3 pF B37930K5030C3** 0.8 ±0.1 4000 16000 15000
3.9 pF B37930K5030C9** 0.8 ±0.1 4000 16000 15000
4.7 pF B37930K5040C7** 0.8 ±0.1 4000 16000 15000
5.6 pF B37930K5050D6** 0.8 ±0.1 4000 16000 15000
6.8 pF B37930K5060D8** 0.8 ±0.1 4000 16000 15000
8.2 pF B37930K5080D2** 0.8 ±0.1 4000 16000 15000
10. pF B37930K5100J0** 0.8 ±0.1 4000 16000 15000
12. pF B37930K5120J0** 0.8 ±0.1 4000 16000 15000
15. pF B37930K5150J0** 0.8 ±0.1 4000 16000 15000
18. pF B37930K5180J0** 0.8 ±0.1 4000 16000 15000
22. pF B37930K5220J0** 0.8 ±0.1 4000 16000 15000
27. pF B37930K5270J0** 0.8 ±0.1 4000 16000 15000
33. pF B37930K5330J0** 0.8 ±0.1 4000 16000 15000
39. pF B37930K5390J0** 0.8 ±0.1 4000 16000 15000
47. pF B37930K5470J0** 0.8 ±0.1 4000 16000 15000
56. pF B37930K5560J0** 0.8 ±0.1 4000 16000 15000
68. pF B37930K5680J0** 0.8 ±0.1 4000 16000 15000
82. pF B37930K5820J0** 0.8 ±0.1 4000 16000 15000
100. pF B37930K5101J0** 0.8 ±0.1 4000 16000 15000
120. pF B37930K5121J0** 0.8 ±0.1 4000 16000 15000
150. pF B37930K5151J0** 0.8 ±0.1 4000 16000 15000
180. pF B37930K5181J0** 0.8 ±0.1 4000 16000 15000
220. pF B37930K5221J0** 0.8 ±0.1 4000 16000 15000
270. pF B37930K5271J0** 0.8 ±0.1 4000 16000 15000
330. pF B37930K5331J0** 0.8 ±0.1 4000 16000 15000
390. pF B37930K5391J0** 0.8 ±0.1 4000 16000 15000
470. pF B37930K5471J0** 0.8 ±0.1 4000 16000 15000
1) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
^^ ^
C0G; 0603
Multilayer ceramic capacitors
10 10/06
C0G
Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing for C0G, 100 VDC, nickel barrier terminations
Case size 0603, 100 VDC
Chip
thickness
Cardboard tape,
Æ 180-mm reel
Cardboard tape,
Æ 330-mm reel
Bulk case
** 60 ** 70 ** 01
CROrdering code1) mm pcs/reel pcs/reel pcs
1.0 pF B37930K1010C0** 0.8 ±0.1 4000 16000 15000
1.5 pF B37930K1010C5** 0.8 ±0.1 4000 16000 15000
2.2 pF B37930K1020C2** 0.8 ±0.1 4000 16000 15000
3.3 pF B37930K1030C3** 0.8 ±0.1 4000 16000 15000
4.7 pF B37930K1040C7** 0.8 ±0.1 4000 16000 15000
6.8 pF B37930K1060D8** 0.8 ±0.1 4000 16000 15000
10. pF B37930K1100J0** 0.8 ±0.1 4000 16000 15000
15. pF B37930K1150J0** 0.8 ±0.1 4000 16000 15000
22. pF B37930K1220J0** 0.8 ±0.1 4000 16000 15000
33. pF B37930K1330J0** 0.8 ±0.1 4000 16000 15000
47. pF B37930K1470J0** 0.8 ±0.1 4000 16000 15000
68. pF B37930K1680J0** 0.8 ±0.1 4000 16000 15000
100. pF B37930K1101J0** 0.8 ±0.1 4000 16000 15000
150. pF B37930K1151J0** 0.8 ±0.1 4000 16000 15000
220. pF B37930K1221J0** 0.8 ±0.1 4000 16000 15000
1) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
^^ ^
C0G; 0603
Multilayer ceramic capacitors
11 10/06
C0G
Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations
Case size 0805, 50 VDC
Chip
thickness
Cardboard tape,
Æ 180-mm reel
Cardboard tape,
Æ 330-mm reel
Bulk case
** 60 ** 70 ** 01
CROrdering code1) mm pcs/reel pcs/reel pcs
1.0 pF B37940K5010C0** 0.6 ±0.1 5000 20000 10000
1.2 pF B37940K5010C2** 0.6 ±0.1 5000 20000 10000
1.5 pF B37940K5010C5** 0.6 ±0.1 5000 20000 10000
1.8 pF B37940K5010C8** 0.6 ±0.1 5000 20000 10000
2.2 pF B37940K5020C2** 0.6 ±0.1 5000 20000 10000
2.7 pF B37940K5020C7** 0.6 ±0.1 5000 20000 10000
3.3 pF B37940K5030C3** 0.6 ±0.1 5000 20000 10000
3.9 pF B37940K5030C9** 0.6 ±0.1 5000 20000 10000
4.7 pF B37940K5040C7** 0.6 ±0.1 5000 20000 10000
5.6 pF B37940K5050D6** 0.6 ±0.1 5000 20000 10000
6.8 pF B37940K5060D8** 0.6 ±0.1 5000 20000 10000
8.2 pF B37940K5080D2** 0.6 ±0.1 5000 20000 10000
10. pF B37940K5100J0** 0.6 ±0.1 5000 20000 10000
12. pF B37940K5120J0** 0.6 ±0.1 5000 20000 10000
15. pF B37940K5150J0** 0.6 ±0.1 5000 20000 10000
18. pF B37940K5180J0** 0.6 ±0.1 5000 20000 10000
22. pF B37940K5220J0** 0.6 ±0.1 5000 20000 10000
27. pF B37940K5270J0** 0.6 ±0.1 5000 20000 10000
33. pF B37940K5330J0** 0.6 ±0.1 5000 20000 10000
39. pF B37940K5390J0** 0.6 ±0.1 5000 20000 10000
47. pF B37940K5470J0** 0.6 ±0.1 5000 20000 10000
56. pF B37940K5560J0** 0.6 ±0.1 5000 20000 10000
68. pF B37940K5680J0** 0.6 ±0.1 5000 20000 10000
82. pF B37940K5820J0** 0.6 ±0.1 5000 20000 10000
100. pF B37940K5101J0** 0.6 ±0.1 5000 20000 10000
120. pF B37940K5121J0** 0.6 ±0.1 5000 20000 10000
150. pF B37940K5151J0** 0.6 ±0.1 5000 20000 10000
180. pF B37940K5181J0** 0.6 ±0.1 5000 20000 10000
220. pF B37940K5221J0** 0.6 ±0.1 5000 20000 10000
270. pF B37940K5271J0** 0.6 ±0.1 5000 20000 10000
330. pF B37940K5331J0** 0.6 ±0.1 5000 20000 10000
390. pF B37940K5391J0** 0.6 ±0.1 5000 20000 10000
470. pF B37940K5471J0** 0.6 ±0.1 5000 20000 10000
1) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
^^ ^
C0G; 0805
Multilayer ceramic capacitors
12 10/06
C0G
Please read Cautions and warnings and
Important notes at the end of this document.
560. pF B37940K5561J0** 0.6 ±0.1 5000 20000 10000
680. pF B37940K5681J0** 0.6 ±0.1 5000 20000 10000
820. pF B37940K5821J0** 0.6 ±0.1 5000 20000 10000
1.0 nF B37940K5102J0** 0.6 ±0.1 5000 20000 10000
1.2 nF B37940K5122J0** 0.8 ±0.1 4000 16000
1.5 nF B37940K5152J0** 0.8 ±0.1 4000 16000
1.8 nF B37940K5182J0** 1.2 ±0.1 30002) 120003)
2.2 nF B37940K5222J0** 1.2 ±0.1 30002) 120003)
Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations
Case size 0805, 50 VDC
Chip
thickness
Cardboard tape,
Æ 180-mm reel
Cardboard tape,
Æ 330-mm reel
Bulk case
** 60 ** 70 ** 01
CROrdering code1) mm pcs/reel pcs/reel pcs
^^^
1) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
2) Blister tape, 180-mm reel, ordering code ** 62
3) Blister tape, 330-mm reel, ordering code ** 72
^
^
C0G; 0805
Multilayer ceramic capacitors
13 10/06
C0G
Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing for C0G, 100 VDC, nickel barrier terminations
Case size 0805, 100 VDC
Chip thickness Cardboard tape,
Æ 180-mm reel
Cardboard tape,
Æ 330-mm reel
** 60 ** 70
CROrdering code1) mm pcs/reel pcs/reel
1.0 pF B37940K1010C0** 0.6 ±0.1 5000 20000
1.2 pF B37940K1010C2** 0.6 ±0.1 5000 20000
1.5 pF B37940K1010C5** 0.6 ±0.1 5000 20000
1.8 pF B37940K1010C8** 0.6 ±0.1 5000 20000
2.2 pF B37940K1020C2** 0.6 ±0.1 5000 20000
2.7 pF B37940K1020C7** 0.6 ±0.1 5000 20000
3.3 pF B37940K1030C3** 0.6 ±0.1 5000 20000
3.9 pF B37940K1030C9** 0.6 ±0.1 5000 20000
4.7 pF B37940K1040C7** 0.6 ±0.1 5000 20000
5.6 pF B37940K1050D6** 0.6 ±0.1 5000 20000
6.8 pF B37940K1060D8** 0.6 ±0.1 5000 20000
8.2 pF B37940K1080D2** 0.6 ±0.1 5000 20000
10. pF B37940K1100J0** 0.6 ±0.1 5000 20000
12. pF B37940K1120J0** 0.6 ±0.1 5000 20000
15. pF B37940K1150J0** 0.6 ±0.1 5000 20000
18. pF B37940K1180J0** 0.6 ±0.1 5000 20000
22. pF B37940K1220J0** 0.6 ±0.1 5000 20000
27. pF B37940K1270J0** 0.6 ±0.1 5000 20000
33. pF B37940K1330J0** 0.6 ±0.1 5000 20000
39. pF B37940K1390J0** 0.6 ±0.1 5000 20000
47. pF B37940K1470J0** 0.6 ±0.1 5000 20000
56. pF B37940K1560J0** 0.6 ±0.1 5000 20000
68. pF B37940K1680J0** 0.6 ±0.1 5000 20000
82. pF B37940K1820J0** 0.6 ±0.1 5000 20000
100. pF B37940K1101J0** 0.6 ±0.1 5000 20000
120. pF B37940K1121J0** 0.6 ±0.1 5000 20000
150. pF B37940K1151J0** 0.6 ±0.1 5000 20000
180. pF B37940K1181J0** 0.6 ±0.1 5000 20000
220. pF B37940K1221J0** 0.6 ±0.1 5000 20000
270. pF B37940K1271J0** 0.6 ±0.1 5000 20000
330. pF B37940K1331J0** 0.6 ±0.1 5000 20000
390. pF B37940K1391J0** 0.6 ±0.1 5000 20000
470. pF B37940K1471J0** 0.6 ±0.1 5000 20000
1) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
^^
C0G; 0805
Multilayer ceramic capacitors
14 10/06
C0G
Please read Cautions and warnings and
Important notes at the end of this document.
560. pF B37940K1561J0** 0.8 ±0.1 4000 16000
680. pF B37940K1681J0** 0.8 ±0.1 4000 16000
820. pF B37940K1821J0** 1.2 ±0.1 30003) 120004)
1.0 nF B37940K1102J0** 1.2 ±0.1 30003) 120004)
Ordering codes and packing for C0G, 200 VDC, nickel barrier terminations
Case size 0805, 200 VDC
Chip thickness Cardboard tape,
Æ 180-mm reel
Cardboard tape,
Æ 330-mm reel
** 60 ** 70
CR2) Ordering code1) mm pcs/reel pcs/reel
2.2 pF B37940K2020C2** 0.6 ±0.1 5000 20000
3.3 pF B37940K2030C3** 0.6 ±0.1 5000 20000
4.7 pF B37940K2040C7** 0.6 ±0.1 5000 20000
6.8 pF B37940K2060D8** 0.6 ±0.1 5000 20000
10. pF B37940K2100J0** 0.6 ±0.1 5000 20000
15. pF B37940K2150J0** 0.6 ±0.1 5000 20000
22. pF B37940K2220J0** 0.6 ±0.1 5000 20000
33. pF B37940K2330J0** 0.6 ±0.1 5000 20000
47. pF B37940K2470J0** 0.6 ±0.1 5000 20000
68. pF B37940K2680J0** 0.6 ±0.1 5000 20000
100. pF B37940K2101J0** 0.6 ±0.1 5000 20000
150. pF B37940K2151J0** 0.8 ±0.1 4000 16000
220. pF B37940K2221J0** 0.8 ±0.1 4000 16000
330. pF B37940K2331J0** 1.2 ±0.1 30003) 120004)
Ordering codes and packing for C0G, 100 VDC, nickel barrier terminations
Case size 0805, 100 VDC
Chip thickness Cardboard tape,
Æ 180-mm reel
Cardboard tape,
Æ 330-mm reel
** 60 ** 70
CROrdering code1) mm pcs/reel pcs/reel
^ ^
1) Other capacitance values on request.
2) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
3) Blister tape, 180-mm reel, ordering code ** 62
4) Blister tape, 330-mm reel, ordering code ** 72
^
^
^ ^
C0G; 0805
Multilayer ceramic capacitors
15 10/06
C0G
Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations
Case size 1206, 50 VDC
Chip thickness Cardboard tape,
Æ 180-mm reel
Cardboard tape,
Æ 330-mm reel
** 60 ** 70
CROrdering code1) mm pcs/reel pcs/reel
1.0 pF B37871K5010C0** 0.8 ±0.1 4000 16000
1.2 pF B37871K5010C2** 0.8 ±0.1 4000 16000
1.5 pF B37871K5010C5** 0.8 ±0.1 4000 16000
1.8 pF B37871K5010C8** 0.8 ±0.1 4000 16000
2.2 pF B37871K5020C2** 0.8 ±0.1 4000 16000
2.7 pF B37871K5020C7** 0.8 ±0.1 4000 16000
3.3 pF B37871K5030C3** 0.8 ±0.1 4000 16000
3.9 pF B37871K5030C9** 0.8 ±0.1 4000 16000
4.7 pF B37871K5040C7** 0.8 ±0.1 4000 16000
5.6 pF B37871K5050D6** 0.8 ±0.1 4000 16000
6.8 pF B37871K5060D8** 0.8 ±0.1 4000 16000
8.2 pF B37871K5080D2** 0.8 ±0.1 4000 16000
10. pF B37871K5100J0** 0.8 ±0.1 4000 16000
12. pF B37871K5120J0** 0.8 ±0.1 4000 16000
15. pF B37871K5150J0** 0.8 ±0.1 4000 16000
18. pF B37871K5180J0** 0.8 ±0.1 4000 16000
22. pF B37871K5220J0** 0.8 ±0.1 4000 16000
27. pF B37871K5270J0** 0.8 ±0.1 4000 16000
33. pF B37871K5330J0** 0.8 ±0.1 4000 16000
39. pF B37871K5390J0** 0.8 ±0.1 4000 16000
47. pF B37871K5470J0** 0.8 ±0.1 4000 16000
56. pF B37871K5560J0** 0.8 ±0.1 4000 16000
68. pF B37871K5680J0** 0.8 ±0.1 4000 16000
82. pF B37871K5820J0** 0.8 ±0.1 4000 16000
100. pF B37871K5101J0** 0.8 ±0.1 4000 16000
120. pF B37871K5121J0** 0.8 ±0.1 4000 16000
150. pF B37871K5151J0** 0.8 ±0.1 4000 16000
180. pF B37871K5181J0** 0.8 ±0.1 4000 16000
220. pF B37871K5221J0** 0.8 ±0.1 4000 16000
270. pF B37871K5271J0** 0.8 ±0.1 4000 16000
330. pF B37871K5331J0** 0.8 ±0.1 4000 16000
390. pF B37871K5391J0** 0.8 ±0.1 4000 16000
470. pF B37871K5471J0** 0.8 ±0.1 4000 16000
1) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
^^
C0G; 1206
Multilayer ceramic capacitors
16 10/06
C0G
Please read Cautions and warnings and
Important notes at the end of this document.
560. pF B37871K5561J0** 0.8 ±0.1 4000 16000
680. pF B37871K5681J0** 0.8 ±0.1 4000 16000
820. pF B37871K5821J0** 0.8 ±0.1 4000 16000
1.0 nF B37871K5102J0** 0.8 ±0.1 4000 16000
1.2 nF B37871K5122J0** 0.8 ±0.1 4000 16000
1.5 nF B37871K5152J0** 0.8 ±0.1 4000 16000
1.8 nF B37871K5182J0** 0.8 ±0.1 4000 16000
2.2 nF B37871K5222J0** 0.8 ±0.1 4000 16000
2.7 nF B37871K5272J0** 0.8 ±0.1 4000 16000
3.3 nF B37871K5332J0** 0.8 ±0.1 4000 16000
3.9 nF B37871K5392J0** 0.8 ±0.1 4000 16000
4.7 nF B37871K5472J0** 1.2 ±0.1 30002) 120003)
5.6 nF B37871K5562J0** 1.2 ±0.1 30002) 120003)
Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations
Case size 1206, 50 VDC
Chip thickness Cardboard tape,
Æ 180-mm reel
Cardboard tape,
Æ 330-mm reel
** 60 ** 70
CROrdering code1) mm pcs/reel pcs/reel
^ ^
1) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
2) Blister tape, 180-mm reel, ordering code ** 62
3) Blister tape, 330-mm reel, ordering code ** 72
^
^
C0G; 1206
Multilayer ceramic capacitors
17 10/06
C0G
Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing for C0G, 100 VDC, nickel barrier terminations
Case size 1206, 100 VDC
Chip thickness Cardboard tape,
Æ 180-mm reel
Cardboard tape,
Æ 330-mm reel
** 60 ** 70
CROrdering code1) mm pcs/reel pcs/reel
1.0 pF B37871K1010C0** 0.8 ±0.1 4000 16000
1.5 pF B37871K1010C5** 0.8 ±0.1 4000 16000
2.2 pF B37871K1020C2** 0.8 ±0.1 4000 16000
3.3 pF B37871K1030C3** 0.8 ±0.1 4000 16000
4.7 pF B37871K1040C7** 0.8 ±0.1 4000 16000
6.8 pF B37871K1060D8** 0.8 ±0.1 4000 16000
10. pF B37871K1100J0** 0.8 ±0.1 4000 16000
15. pF B37871K1150J0** 0.8 ±0.1 4000 16000
22. pF B37871K1220J0** 0.8 ±0.1 4000 16000
33. pF B37871K1330J0** 0.8 ±0.1 4000 16000
47. pF B37871K1470J0** 0.8 ±0.1 4000 16000
68. pF B37871K1680J0** 0.8 ±0.1 4000 16000
100. pF B37871K1101J0** 0.8 ±0.1 4000 16000
150. pF B37871K1151J0** 0.8 ±0.1 4000 16000
220. pF B37871K1221J0** 0.8 ±0.1 4000 16000
330. pF B37871K1331J0** 0.8 ±0.1 4000 16000
470. pF B37871K1471J0** 0.8 ±0.1 4000 16000
680. pF B37871K1681J0** 0.8 ±0.1 4000 16000
1.0 nF B37871K1102J0** 0.8 ±0.1 4000 16000
1.5 nF B37871K1152J0** 0.8 ±0.1 4000 16000
2.2 nF B37871K1222J0** 1.2 ±0.1 30002) 120003)
1) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
2) Blister tape, 180-mm reel, ordering code ** 62
3) Blister tape, 330-mm reel, ordering code ** 72
^
^
^ ^
C0G; 1206
Multilayer ceramic capacitors
18 10/06
C0G
Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations
Case size 1210, 50 VDC
Chip thickness Blister tape,
Æ 180-mm reel
Blister tape,
Æ 330-mm reel
** 62 ** 72
CROrdering code1) mm pcs/reel pcs/reel
1.0 nF B37949K5102J0** 0.8 ±0.1 4000 16000
1.5 nF B37949K5152J0** 0.8 ±0.1 4000 16000
2.2 nF B37949K5222J0** 0.8 ±0.1 4000 16000
3.3 nF B37949K5332J0** 0.8 ±0.1 4000 16000
4.7 nF B37949K5472J0** 0.8 ±0.1 4000 16000
6.8 nF B37949K5682J0** 0.8 ±0.1 4000 16000
10. nF B37949K5103J0** 1.2 ±0.1 3000 12000
Ordering codes and packing for C0G, 100 VDC, nickel barrier terminations
Case size 1210, 100 VDC
Chip thickness Blister tape,
Æ 180-mm reel
Blister tape,
Æ 330-mm reel
** 62 ** 72
CROrdering code1) mm pcs/reel pcs/reel
1.0 nF B37949K1102J0** 0.8 ±0.1 4000 16000
1.5 nF B37949K1152J0** 0.8 ±0.1 4000 16000
2.2 nF B37949K1222J0** 0.8 ±0.1 4000 16000
3.3 nF B37949K1332J0** 0.8 ±0.1 4000 16000
4.7 nF B37949K1472J0** 1.2 ±0.1 3000 12000
6.8 nF B37949K1682J0** 1.2 ±0.1 3000 12000
1) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 4.
^^
^ ^
C0G; 1210
Multilayer ceramic capacitors
19 10/06
C0G
Please read Cautions and warnings and
Important notes at the end of this document.
Typical characteristics1)
Capacitance change DC/C25 versus
temperature T (tolerance range )
Capacitance change DC/C0 versus
superimposed DC voltage V
Impedance |Z| versus
frequency f
Dissipation factor tan d versus
temperature T
1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance.
KKE0107-F
25
T
0 20 40 60 80 120
0
0.2
0.4
0.6
1.0
%
C
C
55
__
40 20
_
_
1.0
0.8
_
0.6
_
0.4
_
0.2
_
C
˚
KKE0458-8
0
V
80 120 160 V 200
0
0.1
0.2
0.3
0.5
%
C
C
400
0.1
_
_
0.2
_
0.3
_
0.4
_
0.5
KKE0124-5
100101102103
Z
10
f
2
_
MHz
10
_
1
100
1
10
102
103
104
5
10
1 pF
10 pF
100 pF
1 nF
KKE0118-V
tan
T
0 20 40 60 80 100 140
δ
60
_
40
_
20
_
5
10
_
10
4
_
10
3
_
10
2
_
C
˚
C0G
Multilayer ceramic capacitors
20 10/06
C0G
Please read Cautions and warnings and
Important notes at the end of this document.
Typical characteristics1)
Insulation resistance Rins versus
temperature T
Capacitance change DC/C1 versus
time t
1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance.
KKE0129-B
R
T
2
10
ins
0 20 40 60 80 100 140
10
3
10
4
10
5
10
6
10
8
M
C
˚
KKE0100-S
t
h
10
0
10
1
10
2
10
3
C
C
1
_
10
15
20
_
_
_
5
0
%
5
C0G
21 10/06
Multilayer ceramic capacitors
Cautions and warnings
Notes on the selection of ceramic capacitors
In the selection of ceramic capacitors, the following criteria must be considered:
1. Depending on the application, ceramic capacitors used to meet high quality requirements should
at least satisfy the specifications to AEC-Q200. They must meet quality requirements going
beyond this level in terms of ruggedness (e.g. mechanical, thermal or electrical) in the case of
critical circuit configurations and applications (e.g. in safety-relevant applications such as ABS
and airbag equipment or durable industrial goods).
2. At the connection to the battery or power supply (e.g. clamp 15 or 30 in the automobile) and at
positions with stranding potential, to reduce the probability of short circuits following a fracture,
two ceramic capacitors must be connected in series and/or a ceramic capacitor with integrated
series circuit should be used. The MLSC from EPCOS contains such a series circuit in a single
component.
3. Ceramic capacitors with the temperature characteristics Z5U and Y5V do not satisfy the require-
ments to AEC-Q200 and are mechanically and electrically less rugged than C0G or X7R/X8R
ceramic capacitors. In applications that must satisfy high quality requirements, therefore, these
capacitors should not be used as discrete components (see the chapter “Effects on mechanical,
thermal and electrical stress”, point 1.4).
4. For ESD protection, preference should be given to the use of multilayer varistors (MLV) (see the
chapter “Effects on mechanical, thermal and electrical stress”, point 1.4).
5. An application-specific derating or continuous operating voltage must be considered in order to
cushion (unexpected) additional stresses (see the chapter “Reliability”).
The following should be considered in circuit board design
1. If technically feasible in the application, preference should be given to components having an
optimal geometrical design.
2. At least FR4 circuit board material should be used.
3. Geometrically optimal circuit boards should be used, ideally those that cannot be deformed.
4. Ceramic capacitors must always be placed a sufficient minimum distance from the edge of the
circuit board. High bending forces may be exerted there when the panels are separated and dur-
ing further processing of the board (such as when incorporating it into a housing).
5. Ceramic capacitors should always be placed parallel to the possible bending axis of the circuit
board.
6. No screw connections should be used to fix the board or to connect several boards. Compo-
nents should not be placed near screw holes. If screw connections are unavoidable, they must
be cushioned (for instance by rubber pads).
22 10/06
Multilayer ceramic capacitors
Cautions and warnings
The following should be considered in the placement process
1. Ensure correct positioning of the ceramic capacitor on the solder pad.
2. Caution when using casting, injection-molded and molding compounds and cleaning agents,
as these may damage the capacitor.
3. Support the circuit board and reduce the placement forces.
4. A board should not be straightened (manually) if it has been distorted by soldering.
5. Separate panels with a peripheral saw, or better with a milling head (no dicing or breaking).
6. Caution in the subsequent placement of heavy or leaded components (e.g. transformers or
snap-in components): danger of bending and fracture.
7. When testing, transporting, packing or incorporating the board, avoid any deformation of the
board not to damage the components.
8. Avoid the use of excessive force when plugging a connector into a device soldered onto the
board.
9. Ceramic capacitors must be soldered only by the mode (reflow or wave soldering) permissible
for them (see the chapter “Soldering directions”).
10. When soldering the most gentle solder profile feasible should be selected (heating time, peak
temperature, cooling time) in order to avoid thermal stresses and damage.
11. Ensure the correct solder meniscus height and solder quantity.
12. Ensure correct dosing of the cement quantity.
13. Ceramic capacitors with an AgPd external termination are not suited for the lead-free solder
process: they were developed only for conductive adhesion technology.
This listing does not claim to be complete, but merely reflects the experience of EPCOS AG.