MF2000 Series Powertron * * * * * * * Resistances from 1 to 10MOhms Power Rating 0.4 to 0.65Watts Resistance Tolerances to 0.05% TCR's to 3ppm/K Very Low Inductance Matched Sets Available E192 Values in Stock SPECIFICATIONS Power Rating Watts @ 70C Resistance Range (W) Maximum Voltage MFM2207 0.40 1 to 5M 300 MF2207 0.40 1 to 10M 300 0.260 [6.5] 0.100 [2.5] 0.028 [0.7] 1.20 [30] 0.300 [7.5] RN55 MF2617 0.65 3 to 10M 500 0.600 [15.2] 0.230 [5.8] 0.032 [0.8] 1.20 [30] 0.690 [17.5] RN65 Type H(MAX) D(MAX) d 0.002" [0.05mm] L(MIN) W(MIN) RN Size - ( See MFM2207 Drawing ) MFM2207 Specification Value Resistance Range 1 Ohms to 10MOhms Tolerances 0.05% to 1% Temperature Coefficient ( See Charts ) Temperature Range -25C to +125C ( TC >= 25ppm/K ) -10C to +85C ( TC < 25ppm/K ) Insulation Resistance >10000 MOhms Climatic Category 55/125/56 Max Soldering Temperature +260C / 10s Voltage Coefficient < 5ppm/V Document Number: 64313 Revision: 20-09-10 For technical questions, contact: powertron@vishaypg.com www.powertron.de 1 MF2000 Series Powertron SPECIFICATIONS (continued) MFM2207 TCR / Tolerance / Resistance Chart Resistances Available at These Tolerances TCR ( ppm/K ) 0.05% 0.1% 0.25% 0.5% 1% 5 50 - 250K 10 - 500K 10 - 500K 10 - 500K - 10 50 - 510K 5 - 1M 5 - 1M 5 - 1M - 15 50 - 510K 5 - 1.5M 5 - 1.5M 5 - 2M 1 - 2M 25 50 - 510K 5 - 1.5M 5 - 3M 2 - 5M 1 - 5M 50 50 - 510K 5 - 2M 3 - 3M 2 - 5M 1 - 5M MF2207 TCR / Tolerance / Resistance Chart Resistances Available at These Tolerances TCR ( ppm/K ) 0.05% 0.1% 0.25% 0.5% 1% 3 50 - 120K 30 - 200K 30 - 200K 30 - 200K - 5 50 - 250K 10 - 500K 10 - 500K 10 - 500K - 10 50 - 510K 5 - 1M 50 - 1M 50 - 1M - 15 50 - 510K 5 - 1.5M 5 - 2M 5 - 2M 1 - 2M 25 50 - 510K 5 - 3M 2 - 3M 2 - 5M 1 - 5M 50 50 - 510K 5 - 3M 2 - 3M 2 - 10M 1 - 10M MF2617 TCR / Tolerance / Resistance Chart Resistances Available at These Tolerances TCR ( ppm/K ) 0.05% 0.1% 0.25% 0.5% 1% 10 240 - 250K 100 - 250K 50 - 250K 20 - 510K 20 - 510K 15 240 - 250K 100 - 250K 50 - 250K 20 - 510K 20 - 510K 25 240 - 510K 100 - 1M 50 - 2M 20 - 5M 10 - 5M 50 100 - 510K 50 - 10M 10 - 10M 5 - 10M 3 - 10M Power Derating Curve 120 Ordering Information Power ( % ) 100 80 60 40 20 0 0 Part Number - Resistance - Tolerance - TCR Example: MF2207 1.1 kOhm 0.05% 5ppm ( Note: If no TCR is specified / the highest value will be supplied ) www.powertron.de 2 25 50 75 100 125 150 175 200 Ambient Temperature (C) For technical questions, contact: powertron@vishaypg.com Document Number: 64313 Revision: 20-09-10 Legal Disclaimer Notice Vishay Precision Group Disclaimer ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE. Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay Precision Group"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. The product specifications do not expand or otherwise modify Vishay Precision Group's terms and conditions of purchase, including but not limited to, the warranty expressed therein. Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Information provided in datasheets and/or specifications may vary from actual results in different applications and performance may vary over time. Statements regarding the suitability of products for certain types of applications are based on Vishay Precision Group's knowledge of typical requirements that are often placed on Vishay Precision Group products. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any conduct of Vishay Precision Group. The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document No.: 63999 Revision: 27-Apr-11 www.vishaypg.com 1