3401-031 Microminiature MTB1 Features/Benefits * Non-magnetic * Non-outgassing * High performance MicropinTM contact system ("twist pin" spring male contact and tubular socket contact) * Single-in-line strip Insulator (no metal shell): 2 to 81 cavities * Shell Size described by the total number of insulator cavities * Contact centers: 1,27 (.050) * Suitable for Board-to Board, Board-to Cable, or Cable-to Cable applications * Non removable crimp type contacts * The Connectors are supplied with the Terminations or Cables installed in factory Typical Applications * Payloads Board to board connexion * Antenna connexions and harnesses High performance Microminiature connectors, ESA qualified, for space applications. Space/High reliability MTB1 connectors meet stringent tests for outgassing and residual magnetism and are suitable for use in space, medical, and high performance military/aerospace applications. MTB1 connectors meet the performance of the ESCC 3401 Generic Specification and the dimensional requirements of the ESCC 3401/031 Detail Specification. Materials and Finishes Insulators Diallylphtalate thermoset material, UL 94-V0, glass filled, dark green color Female contacts Copper alloy / Finish: 1,27 m (50 in) min. Gold over Copper underlay Male contacts Copper alloy / Finish: 1,27 m (50 in) min. Gold over Copper underlay Guide posts and polarization keys Stainless Steel type 303, passivated Female latches Stainless Steel type 303, passivated Male latches Stainless Steel type 303, passivated Encapsulant Epoxy Uninsulated rigid Wire ESCC 3901/013 Cables MIL-W-16878/4 Cables Copper / Finish: 1,27 m (50 in) min. Gold over 2,54 (100 in) min. Silver underlay Copper alloy / Finish 2,00 m (79 in) min. Silver / Extruded PTFE Insulation Copper alloy / Finish Silver coating / Extruded PTFE Insulation Dimensions are shown in mm (inch) Dimensions subject to change C1-1 C1.indd 1 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM 3401-031 Microminiature MTB1 Quality Levels ESA/ESCC Quality Level. The Dole plant (France) is qualified by ESA for the supply of Microminiature connectors Type MTB1, according to the ESCC Generic Specification N 3401, and to the applicable ESCC Detail Specification n 3401/031. First qualification obtained in 1986 (renewed every 2 years). Qualification certificate: 141 (MTB1). Applications: Flight equipments, satellites, launchers (ESA requirements). FR022 Quality Level. "Commercial Space Grade". C&K Connector Specification CS FR022, amendment to the ESCC Generic Specification n 3401, for low cost products manufactured: - in the same ESA qualified site - through the same manufacturing and control processes - with the same piece parts - with lighter controls, documentation and traceability Applications: Engineering models, ground equipments, testing, some flight equipments (no need for high requirements). The connectors and accessories, supplied according to these 2 quality levels, are totally compatible, interchangeable, and intermateable, as they are manufactured with the same piece parts (except the cables), in the same ESA qualified site. Connector Styles Description of the 3 Connector Styles proposed for the Space applications (Combinations of Configurations and Quality Levels). Connector Style Configuration Quality Level Space ESA ESA ESA Standard FR022 Standard FR022 Space FR022 ESA FR022 Configuration characteristics. Accessories Cavity filled with epoxy Configuration ESA 1 & N (mandatory) Configuration Space FR022 Configuration Standard FR022 1 & N (mandatory) N.A 3 to N-2 (option) 1 to N (option) Guide Posts 2 & N-1 (mandatory) 2 & N-1 (mandatory) Latching (even number of cavities) N/2 (option) N/2 (option) Polarization key Latching (odd number of cavities) Quality level 3 to N-2 (option) N/2 - 1 (option) N/2 - 1 (option) ESA FR022 1 & N (option) N/2 (option) N/2 - 1 (option) FR022 Dimensions are shown in mm (inch) Dimensions subject to change C1-2 C1.indd 2 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM 3401-031 Microminiature MTB Performance Specifications Operating Temperature range -55C / +125C (-67F / +257F) Storage Temperature range -55C / +125C (-67F / +257F) Working Voltage (between contacts and contact and shell) Rated Current Insulation Resistance (500 V DC) Voltage Proof Contact Retention in insert Engagement / Separation Forces (Male Contacts) Mating / Unmating Forces (per contact) Mechanical Endurance Contact Resistance Maximum Rated Current Maximum Weight Residual Magnetism Level Sea level 150 Vrms 33000 m (108240 feet) altitude 100 Vrms Solid uninsulated Wire 2,5 A max. AWG 26 Wire 2,5 A max. AWG 28 Wire 1,5 A max. 5000 MW min. 600 Vrms / 2.0 mA max. leakage current 22,25 N max. / No contact axial displacement allowed Gauge Fixture Max. Min. Inner diameter Separation Force (N min.) min. / max. 0,559 (.0220) / 0,564 (.0222) 0,582 (.0229) / 0,587 (.0231) 0,137 Engagement Force (N max.) 1,667 Mating: 2.2 N max. Unmating: 0.14 N min. / 2.2 N max. 500 cycles mating/unmating Low level current (10 mA / 20 mV DC): 6.0 mW max. Rated current: 5.0 mW max. Nb of Contacts per Connector 2 to 4 5 to 14 15 and over Solid uninsulated Wire 2,0 A max. 1,8 A max. 1,4 A max. Male Contact Female contact Plug Insulator Receptacle Insulator Guide Posts (pair) Latching Plug part Latching Receptacle part Solid Uninsulated Wire Insulated Cable AWG26 (ESCC 390101302B) Insulated Cable AWG28 (ESCC 390101301B) AWG 26 Wire 2,0 A max. 1,8 A max. 1,4 A max. AWG 28 Wire 1,4 A max. 1,2 A max. 0,9 A max. 0.020 g 0.020 g 0.021 g / cavity 0.006 g / cavity 0.035 g 0.030 g 0.040 g 1.60 g / m 2.30 g / m 1.80 g / m 20000 Gamma max. (NM) Dimensions are shown in mm (inch) Dimensions subject to change C1-3 C1.indd 3 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM 3401-031 Microminiature MTB1 How to order - Connector Style "Space ESA" Description (example): 340103102B 12PFR116D1-4 3401031 02 B 12 P FR116D1 -4 ESCC Detail Specification number Polarization Key Cavity number: Position of the Polarization Key Nothing: No Polarization Key Variant 01: Without Latching 02: With Latching Termination Type Testing Level Level B (Standard: B3 = LAT3) FR112: Harness type, AWG26, length 508,00 (20.000), cable 390101302B FR113: Harness type, AWG26, length 914,00 (36.000), cable 390101302B Shell Size Total number of cavities (**): From 5 to 81 FR114: Harness type, AWG28, length 508,00 (20.000), cable 390101301B Contact Type P: Pin (Male contact) S: Socket (Female contact) FR115: Harness type, AWG28, length 914,00 (36.000), cable 390101301B FR116: Straight PCB Terminations, length 25,40 (1.000) FR116C: 90 bent PCB Terminations, 1 row length 4,00 (.157) FR116D1: 90 bent PCB Terminations, 2 rows, even contacts on second row length 4,00 (.157) FR116D2: 90 bent PCB Terminations, 2 rows, odd contacts on second row length 4,00 (.157) Other configurations available on request, consult factory. CDRI (*), with description MTB1-115288-xxxx Note (**): Connectors are described by the total number of cavities (N), including: - Number of cavities for Epoxy: 0 (Not applicable) - Number of cavities for Guide Posts: 2 (option) (Position 1 & N) - Number of cavities for Polarization Key: 1 (option) (Position 1 to N) - Number of cavities for Latching: 1 (option) (Position N/2 for even numbers, N/2 + 0.5 for odd numbers) - Number of cavities for Contacts: N max. (Position 1 to N) (*): CDRI, see special section Dimensions are shown in mm (inch) Dimensions subject to change C1-4 C1.indd 4 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM 3401-031 Microminiature MTB1 How to order - Connector Style "Space FR022" Description (example): MTB1-12PAL57D1-L-10-4-FR022 MTB1 12 P AL57D1 -L -10 -4 -FR022 Microminiature, MTB1 series Quality Level (Connector Specification CS FR022) (Commercial Space Grade) Shell Size Total number of cavities (**): From 5 to 81 Polarization Key Cavity number: Position of the Polarization Key Nothing: No polarization Key Contact Type P: Pin (Male contact) S: Socket (Female contact) Configuration ESA (Code 10) 2 cavities with Epoxy (Position 1 & N) 2 cavities with Guide Posts (Position 2 & N-1) (Cables MIL-W-16878/4) Latching Nothing: Without Latching Code L: With Latching Termination Type H038: Harness type, AWG26, length 508,00 (20.000), cable MIL-W-16878/4 H011: Harness type, AWG26, length 914,00 (36.000), cable MIL-W-16878/4 H038-AWG28: Harness type, AWG28, length 508,00 (20.000), cable MIL-W-16878/4 H011-AWG28: Harness type, AWG28, length 914,00 (36.000), cable MIL-W-16878/4 L2: Straight PCB Terminations, length 25,40 (1.000) AL57C: 90 bent PCB Terminations, 1 row length 4,00 (.157) AL57D1: 90 bent PCB Terminations, 2 rows, even contacts on second row length 4,00 (.157) 0ther configurations available on request, consult factory. CDRI (*), with description MTB1-115288-xxxx AL57D2: 90 bent PCB Terminations, 2 rows, odd contacts on second row length 4,00 (.157) Note (**): Connectors are described by the total number of cavities (N), including: - Number of cavities for Epoxy: 2 (Position 1 & N) - Number of cavities for Guide Posts: 2 (Position 2 & N-1) - Number of cavities for Polarization Key: 1 (option) (Position 3 to N-2) - Number of cavities for Latching: 1 (option) (Position N/2 for even numbers, N/2 + 0.5 for odd numbers) - Number of cavities for Contacts: N-4 max. (Position 3 to N-2) (*): CDRI, see special section Dimensions are shown in mm (inch) Dimensions subject to change C1-5 C1.indd 5 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM 3401-031 Microminiature MTB1 How to order - Connector Style "Standard FR022" Description (example): MTB1-12PAL57-L-01-4-FR022 MTB1 12 P AL57 -L -01 -4 -FR022 Microminiature, MTB1 series Quality Level (Connector Specification CS FR022) (Commercial Space Grade) Shell Size Total number of cavities (**): From 2 to 81 Polarization Key Cavity number: Position of the Polarization Key Nothing: No polarization Key Contact Type P: Pin (Male contact) S: Socket (Female contact) Guide Posts Nothing: No Guide Posts Code 01: 2 cavities with Guide Posts (Position 1 & N) Latching Nothing: Without Latching Code L: With Latching Termination Type H038: Harness type, AWG26, length 508,00 (20.000), cable MIL-W-16878/4 H011: Harness type, AWG26, length 914,00 (36.000), cable MIL-W-16878/4 H038-AWG28: Harness type, AWG28, length 508,00 (20.000), cable MIL-W-16878/4 H011-AWG28: Harness type, AWG28, length 914,00 (36.000), cable MIL-W-16878/4 L2: Straight PCB Terminations, length 25,40 (1.000) BL57: 90 bent PCB Terminations, 1 row length 4,83 (.190) AL57: 90 bent PCB Terminations, 2 rows, even contacts on second row length 4,83 (190) Other configurations available on request, consult factory. CDRI (*), with description MTB1-115288-xxxx Note (**): Connectors are described by the total number of cavities (N), including: - Number of cavities for Epoxy: 0 (Not applicable) - Number of cavities for Guide Posts: 2 (option) (Position 1 & N) - Number of cavities for Polarization Key: 1 (option) (Position 1 to N) - Number of cavities for Latching: 1 (option) (Position N/2 for even numbers, N/2 + 0.5 for odd numbers) - Number of cavities for Contacts: N max. (Position 1 to N) (*): CDRI, see special section Dimensions are shown in mm (inch) Dimensions subject to change C1-6 C1.indd 6 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM 3401-031 Microminiature MTB1 Contact Design The high-performance and reliable contact characteristics are obtained by the MicropinTM contact system. The flexible "twist-pin" spring contact consists of 7 strands of 0,127 (.005) diameter beryllium copper wire helically wound around a core of 3 strands 0,09 (.0035) diameter soft copper wire. This wire bundle is crimped into a sleeve at one end. The other end is terminated with a hemispherically shaped weld. The wire bundle is compressed to create a bulge with a diameter slightly larger than the socket inside diameter. The pin elongates and twists when it enters the socket. Electrical contact is maintained along 7 spiral lines. The socket is a precision-made tube with a chamfered lead-in. Twist-pin contacts will mate even under severe misalignment. The flexible twist-pin is recessed into the insulator and the rigid socket is exposed, reversing the traditional positions of pin and socket. During mating, the socket is guided into the pin insulator by the lead-in chamfer. The pin is kept from flexing beyond the socket capture radius by the walls of the cavity. The hemispherical weld of controlled radius at the tip of the pin combines with the lead-in chamfers of the socket contact and the pin insulator to cam the pin into alignment. By controlling the welding process and the dimensions of the socket contact and the insulators, it is impossible for the recessed pin to escape the socket capture radius. Dimensions are shown in mm (inch) Dimensions subject to change C1-7 C1.indd 7 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM 3401-031 Microminiature MTB1 Terminations Harness type insulated cables: AWG 26 to AWG 28, 7 strand, single-core cables. AWG26, length 508,00 (20.000): - Cable ESCC 390101302B - Cable MIL-W-16878/4 Code FR112 Code H038 (Space ESA) (Space and Standard FR022) AWG26, length 914,00 (36.000): - Cable ESCC 390101302B - Cable MIL-W-16878/4 Code FR113 Code H011 (Space ESA) (Space and Standard FR022) AWG28, length 508,00 (20.000): - Cable ESCC 390101301B - Cable MIL-W-16878/4 Code FR114 Code H038-AWG28 (Space ESA) (Space and Standard FR022) AWG28, length 914,00 (36.000): - Cable ESCC 390101301B - Cable MIL-W-16878/4 Code FR115 Code H011-AWG28 (Space ESA) (Space and Standard FR022) Solid uninsulated wires (pigtails): 0,45 (.018) diameter, AWG 25 Copper wire, Gold finish. Straight terminations: - Length 25,40 (1.000) - Length 25,40 (1.000) Code FR116 Code L2 (Space ESA) (Space and Standard FR022) PCB terminations: 0,45 (.018) diameter, AWG 25 Copper wire, Gold finish. 90 bent PCB terminations, 1 row: - Length 4,00 (.157) - Length 4,83 (.190) Code FR116C or AL57C Code BL57 (Space ESA) (Standard FR022) 90 bent PCB terminations, 2 rows, even numbered contacts on second row: - Length 4,00 (.157) Code FR116D1 or AL57D1 - Length 4,83 (.190) Code AL57 (Space ESA) (Standard FR022) 90 bent PCB terminations, 2 rows, odd numbered contacts on second row: Code FR116D1 or AL57D2 - Length 4,00 (.157) - Length 4,83 (.190) Code not available: CDRI (Space ESA) (Standard FR022) Other termination types available on request: CDRI - Customer Design Request Information. "Space ESA" Style Termination Type AWG26, L 508,00 (20.000) FR112 AWG28, L 508,00 (20.000) FR114 Straight PCB, L 25,40 (1.000) FR116 AWG26, L 914,00 (36.000) AWG28, L 914,00 (36.000) L 4,00 (.157) L 4,83 (.190) 90 bent PCB, 2 rows, even numbered contacts on second row L 4,00 (.157) L 4,83 (.190) 90 bent PCB, 2 rows, odd numbered contacts on second row L 4,00 (.157) L 4,83 (.190) 90 bent PCB, 1 row "Space FR022" Style H038 FR113 H011 FR115 H011-AWG28 FR116C N.A. FR116D1 N.A. FR116D2 N.A. AL57C N.A. AL572D1 N.A. AL57D2 N.A. "Standard FR022" Style H038 H011 H038-AWG28 H038-AWG28 L2 L2 H011-AWG28 N.A. BL57 N.A. AL57 N.A. N.A.: CDRI N.A.: Not Applicable Dimensions are shown in mm (inch) Dimensions subject to change C1-8 C1.indd 8 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM 3401-031 Microminiature MTB1 Dimensions Shell Size B 2,03 0,13 (.080 .005) C2 7,19 0,13 (.283 .005) C1 Described by the total number of insulator cavities. D E Receptacle (Female Contact) 2,54 0,13 (.100 .005) 3,18 max. (.125 max.) 1,27 Typ. (.050 Typ.) Plug (Male Contact) Rear potting (epoxy): Extension dimension D at the rear of the insulator. Shell Size 2 A 0,38 (.015) 3,05 (.120) Shell Size A 0,38 (.015) Shell Size A 0,38 (.015) Shell Size A 0,38 (.015) 29,72 (1.170) 43 55,12 (2.170) 63 80,52 (3.170) 32,26 (1.270) 45 57,66 (2.270) 65 22 3 4,32 (.170) 23 5 6,85 (.270) 25 4 6 7 5,59 (.220) 8,13 (.320) 9,40 (.370) 24 26 27 42 30,99 (1.220) 44 33,53 (1.320) 46 34,80 (1.370) 47 58,93 (2.320) 60,20 (2.370) 66 67 83,06 (3.270) 84,33 (3.320) 85,60 (3.370) 30 38,61 (1.520) 50 64,01 (2.520) 70 89,41 (3.520) 15,75 (.620) 32 41,15 (1.620) 52 66,55 (2.620) 72 91,95 (3.620) 11 14,48 (.570) 13 17,02 (.670) 12 14 18,29 (.720) 31 33 34 49 39,88 (1.570) 51 42,42 (1.670) 53 43,69 (1.720) 54 15 19,56 (.770) 35 44,96 (1.770) 55 17 22,10 (.870) 37 47,50 (1.870) 57 19 24,64 (.970) 39 50,04 (1.970) 16 18 20 21 20,83 (.820) 23,37 (.920) 25,91 (1.020) 27,18 (1.070) 36 38 40 41 46,23 (1.820) 48,77 (1.920) 51,31 (2.020) 65,28 (2.570) 67,82 (2.670) 69,09 (2.720) 69 71 73 74 86,87 (3.420) 88,14 (3.470) 90,68 (3.570) 93,22 (3.670) 94,49 (3.720) 70,36 (2.770) 75 72,90 (2.870) 77 98,30 (3.870) 59 75,44 (2.970) 79 100,84 (3.970) 61 77,98 (3.070) 81 103,38 (4.070) 56 71,63 (2.820) 58 74,17 (2.920) 60 52,58 (2.070) 62,74 (2.470) 68 81,79 (3.220) 13,20 (.520) 37,34 (1.470) 61,47 (2.420) 64 79,25 (3.120) 10 29 48 56,39 (2.220) 62 10,67 (.420) 11,94 (.470) 36,07 (1.420) 53,85 (2.120) 8 9 28 28,45 (1.120) 76,71 (3.020) 76 78 80 95,76 (3.770) 97,03 (3.820) 99,57 (3.920) 102,11 (4.020) Dimensions are shown in mm (inch) Dimensions subject to change C1-9 C1.indd 9 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM 3401-031 Microminiature MTB1 Contacts Plug (Male Contact) Receptacle (Female Contact) Min. Max. L1 0,25 (.010) 0,91 (.036) L2 3,07 (.121) 3,33 (.131) Position of the Contacts: - Cavities 3 to N-2 for the Space ESA (*) and Space FR022 - Cavities 1 to N for the Standard FR022 (*) Note (*): Optional accessories (Polarisation Key or Latching) placed in contact cavities, the remaining contact position numbers being unchanged. Guide Post / Polarization Key Purpose - Guide Post: Pre-positionning of the contacts before mating. - Polarisation Key: Prevention against reversed position mating or mixing of similar variants. Plug (Male Contact) Receptacle (Female Contact) D1 0,90 0,05 (.034 .002) L1 5,40 min. (.213 min.) D2 L2 0,81 0,03 (.032 .001) 5,08 0,25 (.200 .010) Dimensions are shown in mm (inch) Dimensions subject to change C1-10 C1.indd 10 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM 3401-031 Microminiature MTB1 Latching Purpose: Optional locking mechanism of the mated connectors. PLUG CONNECTOR: IS EQUIPPED WITH A RECEPTACLE LATCH RECEPTACLE CONNECTOR IS EQUIPPED WITH THE PLUG LATCH LOCKING CONDITIONS (RECEPTACLE LATCH) H D 2,80 max. (.110 max.) 0,05 min. (.002 min.) Latching force F: 10 N max. UNLOCKING CONDITIONS (PLUG LATCH) Unlocking force F1: 3 N min. Dimensions are shown in mm (inch) Dimensions subject to change C1-11 C1.indd 11 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM 3401-031 Microminiature MTB1 Straight PCB Terminations (View from mating side) Space ESA and Space FR022 / Plug (Male contacts) Termination code: FR116 Space ESA and Space FR022 / Receptacle (Female contacts) Termination code: FR116 Standard FR022 / Plug (Male contacts) Termination code: L2 Standard FR022 / Receptacle (Female contacts) Termination code: L2 D L 0,455 0,055 (.018 .002) 25,40 min. (1.000 min.) Dimensions are shown in mm (inch) Dimensions subject to change C1-12 C1.indd 12 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM 3401-031 Microminiature MTB1 90 bent PCB Terminations (1 row) (View from mating side) Space ESA and Space FR022 / Plug (Male contacts) Termination code: Quality Level ESA: FR116C Quality Level FR022: AL57C Space ESA and Space FR022 / Receptacle (Female contacts) Termination code: Quality Level ESA: FR116C Quality Level FR022: AL57C Standard FR022 / Plug (Male contacts) Termination code: BL57 Standard FR022 / Receptacle (Female contacts) Termination code: BL57 A 2,54 Typ (.100 Typ) L 4,00 min. (.157 min.) D L1 0,455 0,055 (.018 .002) 4,83 min. (.190 min.) Dimensions are shown in mm (inch) Dimensions subject to change C1-13 C1.indd 13 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM 3401-031 Microminiature MTB1 90 bent PCB Terminations (2 rows) (View from mating side) Space ESA / Plug (Male contacts) Termination code: Quality Level ESA: FR116D1 Quality Level FR022: AL57D1 Space ESA and Space FR022 / Receptacle (Female contacts) Termination code: Quality Level ESA: FR116D1 Quality Level FR022: AL57D1 Standard FR022 / Plug (Male contacts) Termination code: AL57 Standard FR022 / Receptacle (Female contacts) Termination code: AL57 A 2,54 Typ (.100 Typ) L 4,00 min. (.157 min.) D L1 0,455 0,055 (.018 .002) 4,83 min. (.190 min.) Dimensions are shown in mm (inch) Dimensions subject to change C1-14 C1.indd 14 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM 3401-031 Microminiature MTB1 90 bent PCB Terminations (2 rows / contacts on second row on odd cavities) (View from mating side) Space ESA and Space FR022 / Plug (Male contacts) Termination code: Quality Level ESA: FR116D2 Quality Level FR022: AL57D2 Space ESA and Space FR022 / Receptacle (Female contacts) Termination code: Quality Level ESA: FR116D2 Quality Level FR022: AL57D2 Standard FR022 / Plug (Male contacts) Termination code: No code available Supply per CDRI (*) Standard FR022 / Receptacle (Female contacts) Termination code: No code available Supply per CDRI (*) (*): CDRI, see CDRI section A 2,54 Typ (.100 Typ) L 4,00 min. (.157 min.) D L1 0,455 0,055 (.018 .002) 4,83 min. (.190 min.) Dimensions are shown in mm (inch) Dimensions subject to change C1-15 C1.indd 15 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM 3401-031 Microminiature MTB1 Space ESA and Space FR022 Configuration Configurations Options (Face view plug inserts. Use a mirror image for receptacle inserts) Number of Cavities Cavity position (from left to right) = 1 to N Cavity Identification Total Cts Epoxy G. Post N N-4 1&N 2 & N-1 N N-4 1&N 2 & N-1 Polar. Latch Normal Number of Cavities Even Odd Configurations Options Number of Cavities Cavity position (from left to right) = 1 to N Cavity Identification Total Cts Epoxy G. Post Polar. Latch N N-6 1&N 2 & N-1 3 to N-2 N/2 N N-6 1&N 2 & N-1 3 to N-2 N/2 + 0.5 N N-5 1&N 2 & N-1 N/2 N N-5 1&N 2 & N-1 N/2 + 0.5 Even N N-5 1&N 2 & N-1 3 to N-2 Odd N N-5 1&N 2 & N-1 3 to N-2 Number of Cavities Polarization + Latching Even Odd Latching Number of Cavities Even Odd Number of Cavities Polarization Example shown: Total number of cavities: 12 (even number) or 11 (odd number) Polarization Key placed on cavity number 4 Epoxy Guide Post Polarization Key Contact Latching Dimensions are shown in mm (inch) Dimensions subject to change C1-16 C1.indd 16 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM 3401-031 Microminiature MTB1 Standard FR022 without Guide Posts (Face view plug inserts. Use a mirror image for receptacle inserts) Configurations Options Number of Cavities Cavity position (from left to right) = 1 to N Total Cts N N N N Cavity Identification Epoxy G. Post Polar. Latch Number of Cavities Normal Even Odd Configurations Options Number of Cavities Cavity position (from left to right) = 1 to N Total Cts N Cavity Identification Epoxy G. Post Polar. Latch N-2 1 to N N/2 N N-2 1 to N N/2 + 0.5 N N-1 N/2 N N-1 N/2 + 0.5 Even N N-1 1 to N Odd N N-1 1 to N Number of Cavities Polarization + Latching Even Odd Number of Cavities Latching Even Odd Number of Cavities Polarization Example shown: Total number of cavities: 12 (even number) or 11 (odd number) Polarization Key placed on cavity number 4 Polarization Key Contact Latching Dimensions are shown in mm (inch) Dimensions subject to change C1-17 C1.indd 17 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM 3401-031 Microminiature MTB1 Standard FR022 with Guide Posts (Face view plug inserts. Use a mirror image for receptacle inserts) Configurations Options Number of Cavities Cavity position (from left to right) = 1 to N Cavity Identification Total Cts Epoxy G. Post N N-2 1&N N N-2 1&N Polar. Latch Number of Cavities Normal Even Odd Configurations Options Number of Cavities Cavity position (from left to right) = 1 to N Total Cts N Cavity Identification Epoxy G. Post Polar. Latch N-4 1&N 2 to N-1 N/2 N N4 1&N 2 to N-1 N/2 + 0.5 N N-3 N N-3 Even N N-3 Odd N N-3 Number of Cavities Polarization + Latching Even Odd Number of Cavities Latching Even Odd 1&N N/2 1&N N/2 + 0.5 Number of Cavities Polarization 1&N 2 to N-1 1&N 2 to N-1 Example shown: Total number of cavities: 12 (even number) or 11 (odd number) Polarization Key placed on cavity number 4 Guide Post Polarization Key Contact Latching Dimensions are shown in mm (inch) Dimensions subject to change C1-18 C1.indd 18 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM 3401-031 Microminiature MTB1 CDRI Description The "Customer Design Request Information" document (CDRI) is an C&K Specification, describing a product supplied per specific customer specification. For CDRI: Consult factory. Content The CDRI document includes all the necessary data for: - Customer use: characteristics of the product to be inserted into the Customer equipment - C&K use: information for the manufacturing of the product The main data are the following: - Detailed description of the product - Eventual applicable specifications or other documents - Eventual drawings (Customer or C&K) - Detailed amendments to the reference product (dimensions, piece parts, materials, cables) - Detailed amendments to the manufacturing process (assembling, controls, marking, packaging, documentation) - Quality level: ESA: Supply in accordance with the requirements of the ESCC Generic Specification n 3401 FR022: Supply in accordance with the requirements of the C&K Specification CS FR022 Other if applicable - Allocated Descriptions and Part Numbers - Allocated CDRI number Process - Identification of the Customer request (specification, drawing, technical note) - Analysis and feasibility study - Proposal of the best solution, with eventual modifications - Finalization of the Customer request - Eventual prototype - Commercial offer - Finalization of the CDRI document Technical issues specific to the MTB1 Connectors The amendments to the MTB1 Connectors described in this Catalogue can be made by the use of the following parameters: - Other cable lengths - Other PCB terminations - Other cable references - Cables AWG 30 - Coaxial cables, with conductor wired to a contact and shield wired to an adjacent contact or to an external cable - Shielded cables, with conductor wired to a contact and shield wired to an adjacent contact or to an external cable - Solder Cup terminations - Protection of the specific wiring areas by thermo-shrinkable kynar tubes - Transversal holes in the insulators for mechanical fixing onto PCB - Extra-rear potting for Insulators strengthening Dimensions are shown in mm (inch) Dimensions subject to change C1-19 C1.indd 19 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM Dimensions are shown in mm (inch) Dimensions subject to change C1-20 C1.indd 20 www.ck-components.com Rev. 23APR13 5/13/13 6:24 PM