TLP181 TOSHIBA Photocoupler GaAs Ired & Photo-Transistor TLP181 Office Machine Programmable Controllers AC Adapter I/O Interface Board Unit in mm The TOSHIBA mini flat coupler TLP181 is a small outline coupler, suitable for surface mount assembly. TLP181 consist of a photo transistor optically coupled to a gallium arsenide infrared emitting diode. Since TLP181 is smaller than DIP package, it's suitable for high-density surface mounting applications such as programmable controllers * Collector-emitter voltage: 80V (min) * Current transfer ratio: 50% (min) Rank GB: 100% (min) * Isolation voltage: 3750Vrms (min) * Operation Temperature:-55 to 110 C * Safety Standards TOSHIBA UL recognized: UL1577, File No. E67349 11-4C1 Weight: 0.09 g (Typ.) cUL recognized: CSA Component Acceptance Service No. 5A File No.E67349 * BSI approved: BS EN60065:2002, certificate No.8285 BS EN60950-1:2006 certificate No.8286 Option (V4) type VDE approved : EN60747-5-2 Maximum Operating Insuration Voltage: 565 Vpk Highest Permissible Overvoltage: 6000 Vpk (Note) : When a EN60747-5-2 approved type is needed, Please designate "Option(V4)" Pin Configuration (top view) 1 6 3 4 1: Anode 3: Cathode 4: Emitter 6: Collector 1 2009-11-12 TLP181 Current Transfer Ratio Current Transfer Ratio (%) (IC / IF) Type Classification *1 IF = 5mA, VCE = 5V, Ta = 25C Blank TLP181 Min Max 50 600 Marking Of Classification Blank ,Y,Y,YE,G,G,GR,B, B,BL,GB Rank Y 50 150 YE Rank GR 100 300 GR Rank BL 200 600 BL Rank GB 100 600 GB Rank YH 75 150 Y Rank GRL 100 200 G Rank GRH 150 300 G Rank BLL 200 400 B *1: EX, Rank GB: TLP181 (GB) (Note) Application, type name for certification test, please use standard product type name, i, e. TLP181 (GB): TLP181 2 2009-11-12 TLP181 Absolute Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit IF 50 mA IF / C -1.4 (Ta 89C) mA / C Pulse forward current (100s pulse, 100pps) IFP 1 A Reverse voltage VR 5 V Junction temperature Tj 125 C Collector-emitter voltage VCEO 80 V Emitter-collector voltage VECO 7 V Collector current IC 50 mA Collector power dissipation (1 Circuit) PC 150 mW PC / C -1.5 mW / C Tj 125 C Storage temperature range Tstg -55 to 125 C Operating temperature range Topr -55 to 110 C Lead soldering temperature Tsol 260 (10s) C Total package power dissipation PT 200 mW Total package power dissipation derating (Ta 25C) PT / C -2.0 mW / C BVS 3750 Vrms Forward current Detector LED Forward current detating Collector power dissipation derating (1 Circuit Ta 25C) Junction temperature Isolation voltage (AC, 1min., R.H. 60%) (Note 1) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (Note 1) Device considered a two-terminal device: Pin1, 3 shorted together and pins 4, 6 shorted together Recommended Operating Conditions Characteristic Symbol Min Typ. Max Unit Supply voltage VCC 5 48 V Forward current IF 16 20 mA Collector current IC 1 10 mA Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 3 2009-11-12 TLP181 Individual Electrical Characteristics (Ta = 25C) Detector LED Characteristic Symbol Test Condition Min Typ. Max Unit Forward voltage VF IF = 10 mA 1.0 1.15 1.3 V Reverse current IR VR = 5 V -- -- 10 A Capacitance CT V = 0, f = 1 MHz -- 30 -- pF Collector-emitter breakdown voltage V(BR) CEO IC = 0.5 mA 80 -- -- V Emitter-collector breakdown voltage V(BR) ECO IE = 0.1 mA 7 -- -- V VCE = 48 V, ( Ambient light below 1000 lx) -- 0.01 (2) 0.1 (10) A VCE = 48 V, Ta = 85C, ( Ambient light below 1000 lx) -- 2 (4) 50 (50) A V = 0, f = 1 MHz -- 10 -- pF MIn Typ. Max Unit 50 -- 600 100 -- 600 Collector dark current Capacitance (collector to emitter) ICEO CCE Coupled Electrical Characteristics (Ta = 25C) Characteristic Current transfer ratio Saturated CTR Collector-emitter saturation voltage Off-state collector current Symbol IC / IF IC / IF (sat) VCE (sat) IC (off) Test Condition IF = 5 mA, VCE = 5 V Rank GB % IF = 1 mA, VCE = 0.4 V Rank GB -- 60 -- 30 -- -- IC = 2.4 mA, IF = 8 mA -- -- 0.4 IC = 0.2 mA, IF = 1 mA Rank GB -- 0.2 -- -- -- 0.4 VF = 0.7V, VCE = 48 V -- 1 10 A Min Typ. Max Unit -- 0.8 -- pF -- % V Isolation Characteristics (Ta = 25C) Characteristic Symbol Test Condition Capacitance (input to output) CS VS = 0V, f = 1 MHz Isolation resistance RS VS = 500 V, R.H. 60% AC, 1 minute Isolation voltage BVS 1x10 12 10 14 3750 -- -- AC, 1 second, in oil -- 10000 -- DC, 1 minute, in oil -- 10000 -- 4 Vrms Vdc 2009-11-12 TLP181 Switching Characteristics (Ta = 25C) Characteristic Symbol Rise time tr Fall time tf Turn-on time ton Test Condition VCC = 10 V, IC = 2 mA RL = 100 Min Typ. Max -- 2 -- -- 3 -- -- 3 -- Turn-off time toff -- 3 -- Turn-on time tON -- 2 -- -- 25 -- -- 40 -- Storage time ts Turn-off time tOFF Fig. 1 RL = 1.9 k VCC = 5 V, IF = 16 mA (Fig.1) Unit s s Switching time test circuit IF RL VCC IF tS VCE VCE 4.5V 0.5V tON 5 tOFF 2009-11-12 TLP181 PC - Ta 200 80 160 Allowable collector power dissipation PC (mW) Allowable forward current IF (mA) IF - Ta 100 120 60 40 20 0 -20 0 20 40 60 80 100 80 40 0 -20 120 0 20 Ambient temperature Ta (C) 40 IFP - DR 100 120 IF - V F Pulse width 100s Ta = 25C 500 (mA) 300 IF 1000 100 50 30 10 3 10-3 10-2 3 10-1 3 Duty cycle ratio 10 1 0.1 0.01 100 3 85C DR 0.001 0 25 C 0.4 -25C 0.8 1.2 Forward voltage VF / Ta - IF 1.6 VF 2 (V) IFP - VFP -3.2 IFP (mA) 1000 -2.8 -2.4 Pulse forward current Forward voltage temperature coefficient VF / Ta (mV / C) 80 100 Forward current Pulse forward current IFP (mA) 3000 60 Ambient temperature Ta (C) -2.0 -1.6 -1.2 -0.8 500 300 100 50 30 10 Pulse width 10s 5 Repetitive 3 Frequency = 100Hz Ta = 25C -0.4 0.1 0.3 0.5 3 5 10 Forward current 1 IF (mA) 30 1 0.6 50 1.0 1.4 Pulse forward 6 1.8 2.2 voltage 2.6 VFP 3.0 (V) 2009-11-12 TLP181 IC - VCE IC - VCE 50 30 Ta = 25C Ta = 25C 50mA IC 30mA 20mA 15mA 30 Collector current Collector current 10mA PC (max) 20 IF = 5mA 10 0 0 2 4 40mA (mA) 40 IC (mA) 50mA 6 8 Collector-emitter voltage VCE 30mA 20 20mA 10mA 10 5mA 2mA 0 0 10 (V) 0.2 0.4 IC 10 Collector current 5 Ta = 25C 30 Collector dark current Sample A 3 Sample B 1 0.5 VCE = 10V 0.3 VCE = 5V 0.1 0.1 VCE = 0.4V 0.3 0.5 1 3 VCE 1.0 (V) ICEO - Ta 10 ICEO (A) (mA) 50 0.8 Collector-emitter voltage IC - IF 100 0.6 5 10 Forward current IF 30 50 (mA) 10 10 1 0 -1 24V 10 10 10 10V -2 5V -3 -4 0 IC / IF - IF VCE = 48V 20 40 60 80 100 Ambient temperature Ta (C) 1000 Ta = 25C Current transfer ratio IC / IF (%) 500 300 Sample A 100 Sample B 50 30 VCE = 10V VCE = 5V 10 0.1 VCE = 0.4V 0.3 0.5 1 3 5 Forward current IF 10 30 50 (mA) 7 2009-11-12 TLP181 VCE(sat) - Ta IC - Ta 0.24 100 IC = 0.2mA (mA) 0.20 VCE = 5V 50 IF = 25mA 30 10mA IC 0.16 Collector current Collector-emitter saturation voltage VCE(sat) (V) IF = 1mA 0.12 0.08 0.04 5mA 10 5 3 1mA 0 -40 1 -20 0 40 20 60 Ambient temperature Ta 80 100 0.5 (C) 0.5mA 0.3 0.1 -20 Switching Time - RL 1000 0 20 40 Ambient temperature 60 Ta 80 100 (C) Ta = 25C IF = 16mA 500 VCC = 5V Switching Time - Ta 300 160 tOFF 50 tOFF 30 ts 50 30 10 (s) ts 10 Switching time Switching time (s) 100 5 3 tON 1 5 0.5 3 0.3 IF = 16mA tON VCC = 5V 1 1 0.1 3 5 10 Load resistance RL 30 50 100 RL = 1.9k -20 0 20 40 60 80 100 Ambient temperature Ta (C) (k) 8 2009-11-12 TLP181 RESTRICTIONS ON PRODUCT USE * Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. 9 2009-11-12