Sensor Block for Simple Wiring SL-BMW/BW
1016
FIBER
SENSORS
LASER
SENSORS
PHOTO-
ELECTRIC
SENSORS
MICRO
PHOTO-
ELECTRIC
SENSORS
AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
STATIC
CONTROL
DEVICES
LASER
MARKERS
PLC
HUMAN
MACHINE
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
For Large Scale
System
Other
Products
SL-BMW/
BW
SPECIFICACTIONS
Sensor blocks
Extension connector cap Plug-in connector cap
Notes: 1) Where measurement conditions have not been specied precisely, the conditions
used were an ambient temperature of +20 °C +68 °F.
2) PNP output device cannot be connected.
3) Neither SL-BMW, SL-BX or SL-BW consumes current by itself.
4) Maximum 15 inputs are allowed if the self-diagnosis output is used.
5) Maximum 3 inputs are allowed if the self-diagnosis output is used.
6) Use the extension connector cap and the plug-in connector cap to cover each
exposed connector. Three plug-in connector caps are joined together. If two, or
less, are to be used, cut to separate them.
Designation
Plug-in unit sensor main block
Plug-in unit extension block
Snap-connector extension block
Plug-in unit 4-channel sensor block
Item Model No. SL-BMW SL-BX SL-BXJ (Note 2) SL-BW
Supply voltage Depends on used input device
--
Supplied from sensor main block
Depends on used input device
Current consumption Depends on the number and characteristics of the connected
input devices (Note 3)
6 mA/channel
(excluding connected users’ devices)
Depends on the number and characteristics
of the connected input devices (Note 3)
Input channel No. 4 inputs (Max. 16 inputs with extension blocks) (Note 4) 4 inputs (Note 5)
Ambient temperature 0 to +55 °C +32 to +131 °F (No dew condensation allowed), Storage: –20 to +70 °C –4 to +158 °F
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Material Enclosure: Heat-resistant ABS, Connector: PBT, Case cover (SL-BXJ only): Polycarbonate
Cable
0.3 mm
2
2-core cabtyre cable, 2 m 6.562 ft long
--
0.2 mm
2
6-core cabtyre cable, 2 m 6.562 ft long
Weight Net weight: 130 g approx. Net weight: 30 g approx. Net weight: 60 g approx. Net weight: 130 g approx.
Accessories
Extension connector cap: 1 pc.
Plug-in connector cap: 1 set (Note 6)
--
Input designation label set: 1 sheet
Socket seal: 8 sheets
Plug-in connector cap: 1 set
(Note 6)
Plug-in units
Designation Amplier-separated photoelectric sensor Input terminal unit
Item Model No. SU-7J SL-TJ1
Supply voltage 12 to 24 V DC ±10 % (24 V DC supplied from sensor block) 24 V DC ±10 % (24 V DC supplied from sensor block)
Current consumption 35 mA or less 0 mA (7.5 mA or less when the indicator lights up, excluding
connected users’ device)
Output Sensing output and self-diagnosis output
--
Applicable sensor heads SH series
NPN output transistor, DC 2-wire type or relay output sensor,
switch, etc.
(Signal conditions depend on the input conditions of the PLC
connected to the sensor block.)
Sensing range Thru-beam type: 2 m 6.562 ft with SH-33R
Reective type: 100 mm 3.937 in with SH-32R
--
Functions
Automatic sensitivity setting, Sensitivity shift
Stability margin indication, Interference prevention
0 to 5 sec. variable ON and OFF-delay timers
Indicators
Red LED: lights up when the sensor input is ON
Yellow LED: lights up when the self-diagnosis input is ON
Connecting method Connector
Connector (Screw-on-terminal connection of users’ input device)
Ambient temperature
–10 to +55 °C +14 to +131 °F (Note 2), Storage: –20 to +70 °C –4 to +158 °F –10 to +50 °C +14 to +122 °F (Note 2), Storage: –20 to +70 °C –4 to +158 °F
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Material Enclosure: Heat-resistant ABS, Cover: Polycarbonate
Cable lock lever: PPS Enclosure: Heat-resistant ABS, Cover: Polycarbonate
Weight Net weight: 65 g approx. Net weight: 20 g approx.
Accessories MS-DIN-2 (Amplier mounting bracket): 1 pc.
Mode indication label: 1 sheet
--
Notes: 1) Where measurement conditions have not been specied precisely, the conditions used were an ambient temperature of +20 °C +68 °F
(SU-7J: +23 °C +73.4 °F).
2) Please take care that the rated ambient temperature of the sensor block is 0 to +55 °C +32 to +131 °F.