TS63
www.vishay.com Vishay Sfernice
Revision: 18-Sep-14 1Document Number: 51011
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Multi-Turn Surface Mount 1/4" Square Cermet Trimmers,
Fully Sealed
The TS63 multiturn trimmer has been designed for use in
PCB surface mounting applications.
Three variations are available according to the positioning of
the control screw and contact positions.
The cermet track gives a high stability performance with an
extended ohmic capacity of 10 to 2 M.
FEATURES
0.25 W at 70 °C
Industrial grade
Multi-turn operation
A low contact resistance variation (down to 2 % Rn)
Low end contact resistance (1 typical)
Full sealing
Tests according to CECC 41000 or IEC 60393-1
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DIMENSIONS in millimeters (± 0.5 mm)
TS63X RECOMMENDED
SOLDERING AREAS
TS63Z
TS63Y
b
c
Ø 0.45
Slot 0.5 x 0.5
0.25
5.8 ± 0.10
Ø 1.8
0.7
6.85 max.
6.85 max.
0.20
2.54
2.54
5 max.
1 ± 0.10
6.7 max.
1
2.54
2.54
7.5
c
b
a
Ø 1.8
1.3 ± 0.1
7.6 max.
2.54
2.54
Ø 0.45
6.85 max.
0.25
Slot 0.5 x 0.5
6.85 max.
1 ± 0.1
5 max.
8.85 max.
5.3 max.
3
b
ca
9.3
2.54 2.54
1
c
b
1.3 ± 0.1
1 ± 0.10
Ø 0.45
a
6.85 max.
0.3
Ø 1.8
8 max.
Slot 0.5 x 0.5
2.54
2.54
6.85 max.
5 max.
6.85
max.
6.7 max.
2.54
2.54
1
7.5
c
b
a
3
TS63
www.vishay.com Vishay Sfernice
Revision: 18-Sep-14 2Document Number: 51011
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ELECTRICAL SPECIFICATIONS
Resistive Element Cermet
Electrical Travel 14 turns ± 2
Resistance Range 10 to 2 M
Standard Series 1 - 2 - 5
Tolerance Standard ± 10 %
On Request ± 5 %
Circuit Diagram
Power Rating
Linear 0.25 W at 70 °C
Temperature Coefficient See Standard Resistance Element Data table
Limiting Element Voltage 250 V
Contact Resistance Variation (Typical) 2 % Rn or 2
End Resistance Typical) 1
Dielectric Strength (RMS) 1000 V
Insulation Resistance 106 M
MECHANICAL SPECIFICATIONS
Mechanical Travel 15 turns ± 5
Operating Torque (max. Ncm) 1.5
End Stop Torque Clutch action
Unit Weight (max. g) 0.5
Wiper (Actual Travel) Positioned at approx. 50 %
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -55 °C to +155 °C
Climatic Category 55/125/56
Sealing Sealed container
IP67
MSL Level 1
SOLDERING RECOMMENDATIONS
Recommended reflow profile 2, see Application Note www.vishay.com/doc?52029
ac
bcw
(2)
(3)
(1)
0.25
0.125
0
0155
AMBIENT TEMPERATURE IN °C
RATED POWER IN W
50 70 100
TS63
www.vishay.com Vishay Sfernice
Revision: 18-Sep-14 3Document Number: 51011
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PERFORMANCES
TESTS CONDITIONS TYPICAL VALUES AND DRIFTS
RT/RT (%) R1-2/R1-2 (%) OTHER
Electrical Endurance 1000 h at rated power
90'/30' - ambient temp. 70 °C ± 1 % ± 2 % Contact res. variation: < 1 % Rn
Climatic Sequence
Phase A dry heat 125 °C
Phase B damp heat
Phase C cold -55 °C
Phase D damp heat 5 cycles
± 2 % ± 3 %
Damp Heat Steady State 40 °C 93 % RH
56 days ± 2 % ± 3 % Dielectric strength: 1000 VRMS
Insulation resistance: > 104 M
Charge of Temperature -55 °C to +125 °C
5 cycles ± 1 % V1-2/V1-3 ± 2 %
Mechanical Endurance 200 cycles at rated power ± (2 % + 3 ) Contact res. variation: < 3 % Rn
Shock 50 g’s at 11 ms
3 successive shocks in 3 directions ± 1 % V1-2/V1-3 1 %
Vibration
10 Hz to 55 Hz
0.75 mm or 10 g’s
for 6 h
± 1 % V1-2/V1-3 ± 2 %
STANDARD RESISTANCE ELEMENT DATA
STANDARD
RESISTANCE
VALUES
LINEAR LAW TYPICAL
TCR
-55 °C
+125 °C
MAX. POWER
AT 70 °C
MAX. WORKING
VOLTAGE
MAX. CURRENT
THROUGH WIPER
W V mA ppm/°C
10 0.25 1.58 158
± 100
20 0.25 2.23 112
50 0.25 3.53 77
100 0.25 5.00 50
200 0.25 7.07 35
500 0.25 11.2 22
1K 0.25 15.8 15.8
2K 0.25 22.3 11.2
5K 0.25 35.3 7.1
10K 0.25 50.0 5.0
20K 0.25 70.7 3.5
25K 0.25 79.0 3.2
50K 0.25 112 2.2
100K 0.25 158 1.6
200K 0.25 224 1.1
250K 0.25 250 1.1
500K 0.13 250 0.50
1M 0.06 250 0.25
2M 0.03 200 0.125
MARKING
Printed: VISHAY trademark, model, style, ohmic value (in , k, M), tolerance (in %) only if non standard, manufacturing date,
marking of terminal 3.
TS63
www.vishay.com Vishay Sfernice
Revision: 18-Sep-14 4Document Number: 51011
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGING in millimeters
- X, Y and Z types: on tape and reel (dia. 330 mm) of 500 pieces, code TR500
- On request in magazine pack by 50 pieces (Tube) code TU
ORDERING INFORMATION (Part Number)
MODEL STYLE OHMIC VALUE TOLERANCE PACKAGING SPECIAL
NUMBER
TS63 X
Y
Z
From
10 to 2 M
504 = 500 k
K = ± 10 %
On request
J = ± 5 %
R10 =
Reel 500 pieces
On request
T20 =
Tube 50 pieces
(If applicable)
Given by
Vishay
for custom
design
DESCRIPTION (for information only)
TS63 Y 500K 10 % TR e3
MODEL STYLE VALUE TOLERANCE SPECIAL PACKAGING LEAD FINISH
212
4
Ø 1.5
+ 0.1
- 0
1.8
16
6
0.3
Ø 1.5
Version X.Y
16
Ø 1.5
Ø 1.5
12
4
2
2
12° max.
6.05
7.06
0.3
Version Z
1050 K4RYS63T
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.