MKP Series
AXIAL CAPACITORS
PCB APPLICATIONS
Technical data
General characteristics
C4C – C4H – C4G – C4M
–Self-Healing
–Low losses
–High ripple current
–High contact reliability
–Suitable for high frequency
applications
D < 10 mm >10 mm ≥ 22mm > 22 mm
d0.8 mm
20 AW
1 mm
18 AWG
1.2 mm
16 AW
General technical data VDE 0560 - IEC61071 - EN6107
Application class (DIN 40040) GPD / LS
Temperature range (Case) -40 to + 85 °C
Max permissible ambient temperature
(operation at rated power, rated current and
natural cooling)
+70 °C
Capacitance tolerance code (15th digit) J = ± 5%; K = ± 10%
Peak non-repetitive max curren IPKR x 1.
Test voltage terminal to terminal UTT 2 UN for 10 seconds
Insulation resistance test conditions Temperature: +25 °C ± 5%
Voltage charge time: 1 minute
Test voltage: 100 DC
Typical value (Ris x C): 3000 seconds
Test voltage terminal to case UTC 3KV- 50Hz for 60 seconds
Dissipation factor (tgδ)≤ 5 x 10-4 at 1 KHz and 20 °C
Damp heat test - Test conditions
Performances
Temperature: +40 °C - Relative humidity: 93% ±2
Test duration: 56 days
Capacitance change: ≤ ± 5%
tgδ change: ≤ 50% of nominal value at 1 KHz
Insulation resistance: ≤ 50% of limit value
IEC climatic category 40 / 85 / 56 according to IEC 68-1
Capacitance deviation in the operating
temperature range of –40 to +85 °C
±1.5% max on capacitance value measured at +20 °C
Change of capacitance versus operating time -3% after 30.000 Hours at URMS or after 100.000 Hours at UN
Protection Polyester wrapping with epoxy resin fill
Flame retardant (IEC 384-1) Standard execution: not flame retardant 4th digit code
On request flame retardant execution category C,4thdigit code S
Lead Tinned copper (medium lead content 5%)
Installation Whatever Position
Life Expectancy ≥ 30.000 Hours at URMS; ≥ 100.000 Hours at UN
Failure quota 300 / 109 components hour
Vibration strength DIN 40040, Table 6, Class V
W
ØD
T
40±5
L
±5
40
40±5
L
±5
40
ØdØd