Conductive Polymer Aluminum Solid Capacitors Radial Lead Type Series : SEP Features Standard 105 C 3000 h compliance, Halogen free RoHS Specifications Size code C6 E7 F8 E12 F13 Category temperature range -55 C to +105 C Rated voltage range 4 V.DC to 20 V.DC 2.5 V.DC to 20 V.DC Rated capacitance range 22 F to 150 F 33 F to 330 F 56 F to 680 F 100 F to 680 F 150 F to 1500 F Capacitance tolerance 20 % (120 Hz / + 20 C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list +105 C, 3000 h, rated voltage applied (2.5 V.DC 2000 h applied) Capacitance change Within 20 % of the initial value Endurance tan d < 150 % of the initial limit DC leakage current Within the initial limit +60 C, 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within 20 % of the initial value Damp heat (Steady State) tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Dimensions (not to scale) fD fd Polarity marking (-) Lot. No. + F Marking - L 15 min. 4 min. 19 min. Series Unit : mm Size code R. Capacitance R. Voltage C6 E7 F8 E12 F13 fD0.5 6.3 8.0 10.0 8.0 10.0 L max. 6.0 7.0 8.0 12.0 13.0 F0.5 2.5 3.5 5.0 3.5 3.5 fd0.05 0.45 0.45 0.50 0.60 0.60 Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Aluminum Solid Capacitors Characteristics list Series Rated Rated voltage capacitance (V.DC) (F) 2.5 4.0 6.3 SEP 10 16 20 680 1500 100 150 220 330 470 560 680 1200 82 150 330 470 820 56 120 270 330 560 39 82 150 180 330 22 33 47 56 68 100 150 Case size (mm) fD L 8.0 10.0 6.3 6.3 8.0 8.0 10.0 8.0 10.0 10.0 6.3 8.0 10.0 8.0 10.0 6.3 8.0 10.0 8.0 10.0 6.3 8.0 10.0 8.0 10.0 6.3 8.0 8.0 10.0 10.0 10.0 8.0 10.0 12.0 13.0 6.0 6.0 7.0 7.0 8.0 12.0 8.0 13.0 6.0 7.0 8.0 12.0 13.0 6.0 7.0 8.0 12.0 13.0 6.0 7.0 8.0 12.0 13.0 6.0 7.0 7.0 8.0 8.0 8.0 12.0 13.0 Size code E12 F13 C6 E7 F8 E12 F8 F13 C6 E7 F8 E12 F13 C6 E7 F8 E12 F13 C6 E7 F8 E12 F13 C6 E7 F8 E12 F13 Specifications Ripple 1 ESR 2 current tan d 3 (m max.) (mAr.m.s.) 4520 13 0.15 5440 12 0.18 1810 40 0.12 1810 40 0.12 2560 35 0.12 2560 35 0.12 3700 25 0.12 4520 13 0.15 3700 25 0.12 5440 12 0.18 1700 45 0.12 2560 35 0.12 3700 25 0.12 4210 15 0.15 5440 12 0.15 1700 45 0.12 2560 35 0.12 3700 25 0.12 3950 17 0.15 5230 13 0.15 1620 50 0.10 2120 40 0.12 3020 30 0.12 3640 20 0.15 4720 16 0.15 1450 60 0.10 1890 45 0.12 1890 45 0.12 2400 40 0.12 2400 40 0.12 2570 35 0.12 3320 24 0.15 4320 20 0.15 LC 4 (A) Part number 340 750 200 300 440 660 376 448 544 960 258 472 416 592 775 280 600 540 660 840 312 656 480 576 792 220 330 470 224 272 400 400 600 2R5SEP680M 2R5SEP1500M 4SEP100M 4SEP150M 4SEP220M 4SEP330M 4SEP470M 4SEP560M 4SEP680M 4SEP1200M 6SEP82M 6SEP150M 6SEP330M 6SEP470M 6SEP820M 10SEP56M 10SEP120M 10SEP270M 10SEP330M 10SEP560M 16SEP39M 16SEP82M 16SEP150M 16SEP180M 16SEP330M 20SEP22M 20SEP33M 20SEP47M 20SEP56M 20SEP68M 20SEP100MX 20SEP100M 20SEP150M 1 Ripple current (100 kHz/ +105 C ), 2 ESR (100 kHz to 300 kHz/+20 C) 3 tan d (120 Hz/+20 C) 4 After 2 minutes Please refer to each page in this catarog for "Flow conditions" and "Taping specifications". Frequency correction factor for ripple current Frequency Coefficient 120 Hz < f < 1 kHz 0.05 1 kHz < f < 10 kHz 0.3 10 kHz < f < 100 kHz 0.7 100 kHz < f < 500 kHz 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Guidelines and precautions regarding the technical information and use of our products described in this online catalog. If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. The technical information in this online catalog provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. <Regarding the Certificate of Compliance with the EU RoHS Directive/REACH Regulations> The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 01-Apr-19