Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Aluminum Solid Capacitors
fd
L
15 min. 4 min.
19 min.
fD
F
+
–
Lot. No.
Polarity marking (−)
Series
R. Capacitance
R. Voltage
Radial Lead Type
Series : SEP
✽ Externals of fi gure are the reference.
● Standard
● 105 °C 3000 h
● RoHS compliance, Halogen free
Speci cations
Features
Size code C6 E7 F8 E12 F13
Category temperature range
–55 °C to +105 °C
Rated voltage range 4 V.DC to 20 V.DC 2.5 V.DC to 20 V.DC
Rated capacitance range 22 µF to 150 µF 33 µF to 330 µF 56 µF to 680 µF 100 µF to 680 µF 150 µF to 1500 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d) Please see the attached characteristics list
Endurance
+105 °C, 3000 h, rated voltage applied (2.5 V.DC 2000 h applied)
Capacitance change
Within ±20 % of the initial value
tan d< 150 % of the initial limit
DC leakage current Within the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 1000 h, No-applied voltage
Capacitance change
Within ±20 % of the initial value
tan d< 150 % of the initial limit
DC leakage current Within the initial limit (after voltage processing)
Marking
Unit : mm
Size code fD±0.5 L max. F±0.5 fd±0.05
C6 6.3 6.0 2.5 0.45
E7 8.0 7.0 3.5 0.45
F8 10.0 8.0 5.0 0.50
E12 8.0 12.0 3.5 0.60
F13 10.0 13.0 3.5 0.60
Dimensions (not to scale)
Nov. 201501
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Aluminum Solid Capacitors
✽1 Ripple current (100 kHz/ +105 °C ), ✽2 ESR (100 kHz to 300 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes
◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”.
Frequency 120 Hz < f < 1 kHz 1 kHz < f < 10 kHz 10 kHz < f < 100 kHz 100 kHz < f < 500 kHz
Coeffi cient 0.05 0.3 0.7 1
Series
Rated
voltage
(V.DC)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications
Part number
fDL
Ripple ✽1
current
(mAr.m.s.)
ESR ✽2
(mΩ max.)
tan d ✽3LC ✽4
(µA)
SEP
2.5 680 8.0 12.0 E12 4520 13 0.15 340 2R5SEP680M
1500 10.0 13.0 F13 5440 12 0.18 750 2R5SEP1500M
4.0
100 6.3 6.0 C6 1810 40 0.12 200 4SEP100M
150 6.3 6.0 1810 40 0.12 300 4SEP150M
220 8.0 7.0 E7 2560 35 0.12 440 4SEP220M
330 8.0 7.0 2560 35 0.12 660 4SEP330M
470 10.0 8.0 F8 3700 25 0.12 376 4SEP470M
560 8.0 12.0 E12 4520 13 0.15 448 4SEP560M
680 10.0 8.0 F8 3700 25 0.12 544 4SEP680M
1200 10.0 13.0 F13 5440 12 0.18 960 4SEP1200M
6.3
82 6.3 6.0 C6 1700 45 0.12 258 6SEP82M
150 8.0 7.0 E7 2560 35 0.12 472 6SEP150M
330 10.0 8.0 F8 3700 25 0.12 416 6SEP330M
470 8.0 12.0 E12 4210 15 0.15 592 6SEP470M
820 10.0 13.0 F13 5440 12 0.15 775 6SEP820M
10
56 6.3 6.0 C6 1700 45 0.12 280 10SEP56M
120 8.0 7.0 E7 2560 35 0.12 600 10SEP120M
270 10.0 8.0 F8 3700 25 0.12 540 10SEP270M
330 8.0 12.0 E12 3950 17 0.15 660 10SEP330M
560 10.0 13.0 F13 5230 13 0.15 840 10SEP560M
16
39 6.3 6.0 C6 1620 50 0.10 312 16SEP39M
82 8.0 7.0 E7 2120 40 0.12 656 16SEP82M
150 10.0 8.0 F8 3020 30 0.12 480 16SEP150M
180 8.0 12.0 E12 3640 20 0.15 576 16SEP180M
330 10.0 13.0 F13 4720 16 0.15 792 16SEP330M
20
22 6.3 6.0 C6 1450 60 0.10 220 20SEP22M
33 8.0 7.0 E7 1890 45 0.12 330 20SEP33M
47 8.0 7.0 1890 45 0.12 470 20SEP47M
56 10.0 8.0
F8
2400 40 0.12 224 20SEP56M
68 10.0 8.0 2400 40 0.12 272 20SEP68M
100 10.0 8.0 2570 35 0.12 400 20SEP100MX
8.0 12.0 E12 3320 24 0.15 400 20SEP100M
150 10.0 13.0 F13 4320 20 0.15 600 20SEP150M
Frequency correction factor for ripple current
Characteristics list
Nov. 201501
■ If you want to use our products described in this online catalog for applications requiring
special qualities or reliability, or for applications where the failure or malfunction of the
products may directly jeopardize human life or potentially cause personal injury
(e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion
equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety
equipment), it is necessary to verify whether the specifications of our products fit to such
applications. Please ensure that you will ask and check with our inquiry desk as to whether
the specifications of our products fit to such applications use before you use our products.
■ The quality and performance of our products as described in this online catalog only apply
to our products when used in isolation. Therefore, please ensure you evaluate and verify
our products under the specific circumstances in which our products are assembled in your
own products and in which our products will actually be used.
■ If you use our products in equipment that requires a high degree of reliability, regardless
of the application, it is recommended that you set up protection circuits and redundancy
circuits in order to ensure safety of your equipment.
■ The products and product specifications described in this online catalog are subject to
change for improvement without prior notice. Therefore, please be sure to request and
confirm the latest product specifications which explain the specifications of our products in
detail, before you finalize the design of your applications, purchase, or use our products.
■ The technical information in this online catalog provides examples of our products'
typical operations and application circuits. We do not guarantee the non-infringement of
third party's intellectual property rights and we do not grant any license, right, or interest
in our intellectual property.
■ If any of our products, product specifications and/or technical information in this online
catalog is to be exported or provided to non-residents, the laws and regulations of the
exporting country, especially with regard to security and export control, shall be observed.
■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies
depending on the part number or series of our products.
■ When you use the inventory of our products for which it is unclear whether those products
are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the
website inquiry form and contact us.
We do not take any responsibility for the use of our products outside the scope of the
Guidelines and precautions regarding the
described in this online catalog.
<Regarding the Certificate of Compliance with
01-Apr-19
technical information and use of our products
the EU RoHS Directive/REACH Regulations>